Date: Sat, 15 Dec 2007 17:21:35 -0800 From: jekillen <jekillen@prodigy.net> To: FreeBSD Mailing List <freebsd-questions@freebsd.org> Subject: Panic on boot Message-ID: <b7c96d2f9c3004285ed6fe50e4f2ad77@prodigy.net>
next in thread | raw e-mail | index | archive | help
Hello; I have had an AMD64 754 system that I have 64 bit SCSI card and two 15k rpm SCSI drives. It has been running fine with FreeBSD v 6.0 for about two years now. I have several things I wanted to change and reconfigure, software wise, and hardware wise. The first was a new case which I got today. I shut down the system, put everything in the new case and booted. It booted without any complaint. I got the V6.2 install cd and put it in. The system froze during boot process after an entry for mpt 0. I turned off the power and tried rebooting into the install cd. This time it made it to sysinstall and went through slice and partitioning and was in the process of installing the base system and it froze again, no error messaged to console. I rebooted and started again. The second time I got all the way through the install process. Now on reboot the system is panicking just after the line mtp0 hidden device members(6) The error is: Fatal Trap 12 (the screen does not persist long enough to transcribe it all.) Three tries, the same thing in the same place in the boot process. does this mean the scsi drives or card is going bad? (I nope not) the card is LSI Logic 64 bit card (installed in a standard PCI slot but has been working with an inch of the card hanging off the end of the slot. I only have one internal bus available this way, but that is all I need. Thanks in advance for info Jeff K (chewing my fingernails)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b7c96d2f9c3004285ed6fe50e4f2ad77>