Date: Thu, 28 Sep 2006 08:23:39 +0000 From: "Dennis Melentyev" <dennis.melentyev@gmail.com> To: "Ariff Abdullah" <ariff@freebsd.org> Cc: freebsd-multimedia@freebsd.org Subject: Re: snd_hda on Dell Inspirion 1300 and output jacks Message-ID: <b84edfa10609280123k32045d2cs86e1aa44bfb56ed8@mail.gmail.com> In-Reply-To: <20060928150638.6b557435.ariff@FreeBSD.org> References: <b84edfa10609271142p6a72f58fo67701b00b0f81ecd@mail.gmail.com> <20060928025025.2cb5ccc9.ariff@FreeBSD.org> <b84edfa10609272320p2dc768bep9b8c22821aeac4a7@mail.gmail.com> <20060928145528.0c14f75e.ariff@FreeBSD.org> <b84edfa10609272359q7bbb05beof241b05e6cc93052@mail.gmail.com> <20060928150638.6b557435.ariff@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi Ariff, > Since you're using 6-X, just grab the binary from > > http://people.freebsd.org/~ariff/HDA/kmod/ Well, today's binaries work perfect with output. Recording have some issues: > mixer Mixer vol is currently set to 15:15 Mixer pcm is currently set to 75:75 Mixer speaker is currently set to 75:75 Mixer line is currently set to 75:75 Mixer rec is currently set to 100:100 Recording source: line _____ Should the above output show something like "Mixer mic is currently ...."? Should devices like cd/dvd be listed as well? Some thoughts: 1. I'm unable to add device mic to recording sources: > mixer +rec mic mixer: unknown recording device: mic usage: mixer [-f device] [-s | -S] [dev [+|-][voll[:[+|-]volr]] ... mixer [-f device] [-s | -S] recsrc ... mixer [-f device] [-s | -S] {^|+|-|=}rec rdev ... devices: vol, pcm, speaker, line, rec rec devices: vol, line 2. using "line" or "vol" as a recording source results in only noise have been recorded I can attach a sample if needed. 3. dmesg with latest binaries show following: pcm0: Recording sources: pcm0: pcm0: nid=12 [audio selector] pcm0: | pcm0: + <- nid=16 [pin: line in (jack)] [recsrc: vol, line] These appear in rec sources list pcm0: | pcm0: + <- nid=15 [pin: Mic in (jack)] And this is missed. As well as devices below pcm0: | pcm0: + <- nid=14 [pin: speaker (fixed)] pcm0: | pcm0: + <- nid=13 [pin: headphones out (jack)] pcm0: 4. I noticed events in xconsole when I plug headphones in and out. Nothing happens if I do the same with microphone. Should it be reported as well? (I booted with verbose logging) 5. the difference between two dmesg's related to "pcm" is this: @@ -442,6 +438,7 @@ pcm0: Nodes: start=2 endnode=21 total=19 pcm0: [ 2] Ctl nid=11 Bind to NONE pcm0: [ 4] Ctl nid=17 DISABLED +pcm0: Pin sense: nid=13 res=0x7fffffff pcm0: Forcing Soft PCM volume pcm0: Mixer "vol": child=0x00000010 pcm0: Mixer "pcm": parent="vol" @@ -452,7 +449,7 @@ pcm0: sndbuf_setmap ef90000, 4000; 0xcca04000 -> ef90000 pcm0: sndbuf_setmap ef83000, 4000; 0xcca08000 -> ef83000 pcm0: <HDA Codec: Sigmatel STAC9220> -pcm0: <HDA Driver Revision: 20060924_023> +pcm0: <HDA Driver Revision: 20060928_024> pcm0: pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | @@ -616,7 +613,7 @@ pcm0: Pin cap: 0x0000003f pcm0: ISC TRQD HP OUT IN : UNSOL pcm0: Pin config: 0x0321401f -pcm0: Pin control: 0x000000c0 HP OUT +pcm0: Pin control: 0x00000080 HP pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] Anyway, the new dmesg is attached. PS. Sorry if my questions are meaningless/stupid, I'm not good in sound subsystem. PPS. Microphone device is 100% working one. I can easily record voice on my daughter's machine (Win2KPro). -- Dennis Melentyev [-- Attachment #2 --] ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 7 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 7 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x10e0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x2590, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2592, revid=0x03 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dff00000, size 19, enabled map[14]: type 4, range 32, base 0000eff8, size 3, enabled map[18]: type 3, range 32, base c0000000, size 28, enabled map[1c]: type 1, range 32, base dfec0000, size 18, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2792, revid=0x03 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dff80000, size 19, enabled found-> vendor=0x8086, dev=0x2668, revid=0x03 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base dfebc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2660, revid=0x03 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x8086, dev=0x2666, revid=0x03 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 found-> vendor=0x8086, dev=0x2658, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2659, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000bf60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x265a, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x265b, revid=0x03 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=7 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x265c, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base b0000000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2448, revid=0xd3 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2641, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x266f, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bfa0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 acpi_video0: <ACPI video extension> port 0xeff8-0xefff mem 0xdff00000-0xdff7ffff,0xc0000000-0xcfffffff,0xdfec0000-0xdfefffff irq 16 at device 2.0 on pci0 found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0 found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0 found Internal/Integrated Digital Flat Panel(400), idx#0, port#0, detectable by BIOS, head #0 found External Digital Monitor(300), idx#0, port#0, detectable by BIOS, head #0 acpi_video1: <ACPI video extension> mem 0xdff80000-0xdfffffff at device 2.1 on pci0 evaluation of \\_SB_.PCI0.VID2._DOD makes no sense pcm0: <Intel 82801F High Definition Audio Controller> mem 0xdfebc000-0xdfebffff irq 16 at device 27.0 on pci0 pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xdfebc000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 pcm0: [MPSAFE] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pcib1: secondary bus 11 pcib1: subordinate bus 11 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci11: <ACPI PCI bus> on pcib1 pci11: physical bus=11 pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pcib2: secondary bus 12 pcib2: subordinate bus 13 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xdfc00000-0xdfdfffff pcib2: prefetched decode 0xd0000000-0xd01fffff pci12: <ACPI PCI bus> on pcib2 pci12: physical bus=12 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xbf60-0xbf7f irq 17 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf60 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci1: [GIANT-LOCKED] usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xbf40-0xbf5f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xbf20-0xbf3f irq 19 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 uhci3: [GIANT-LOCKED] usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 16 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0000000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 2 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xdfb00000-0xdfbfffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib3 pci2: physical bus=2 found-> vendor=0x14e4, dev=0x170c, revid=0x02 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfbfc000, size 13, enabled pcib3: (null) requested memory range 0xdfbfc000-0xdfbfdfff: good pcib3: matched entry for 2.0.INTA pcib3: slot 0 INTA hardwired to IRQ 18 found-> vendor=0x14e4, dev=0x4318, revid=0x02 bus=2, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 1, range 32, base dfbfe000, size 13, enabled pcib3: (null) requested memory range 0xdfbfe000-0xdfbfffff: good pcib3: matched entry for 2.3.INTA pcib3: slot 3 INTA hardwired to IRQ 17 bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfbfc000-0xdfbfdfff irq 18 at device 0.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xdfbfc000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:14:22:9d:55:1d bfe0: [MPSAFE] ndis0: <Dell TrueMobile 1300 WLAN Mini-PCI Card> mem 0xdfbfe000-0xdfbfffff irq 17 at device 3.0 on pci2 ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xdfbfe000 ndis0: [MPSAFE] ndis0: NDIS API version: 5.1 ndis0: bpf attached ndis0: Ethernet address: 00:14:a5:83:eb:33 ndis0: bpf attached isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54 ata1: [MPSAFE] acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xe81 0xe81 0xe81 0xe81 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xe81 0xe81 0xe81 0xe81 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered lapic: Divisor 2, Frequency 49876468 hz Timecounter "TSC" frequency 1496297747 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached rr232x: no controller detected. acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery0: battery initialization done, tried 1 times ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH6 chip ad0: setting UDMA100 on ICH6 chip ad0: 76319MB <FUJITSU MHV2080AH 000000A0> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed acd0: setting PIO4 on ICH6 chip acd0: setting UDMA33 on ICH6 chip acd0: <SONY CD-RW/DVD-ROM CRX835E/KDKE> CDRW drive at ata0 as slave acd0: 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: Vendor: 0x00008384 pcm0: Device: 0x00007690 pcm0: Revision: 0x00000022 pcm0: Stepping: 0x00000001 pcm0: PCI Subvendor: 0x01c91028 pcm0: Nodes: start=2 endnode=21 total=19 pcm0: [ 2] Ctl nid=11 Bind to NONE pcm0: [ 4] Ctl nid=17 DISABLED pcm0: Pin sense: nid=13 res=0x7fffffff pcm0: Forcing Soft PCM volume pcm0: Mixer "vol": child=0x00000010 pcm0: Mixer "pcm": parent="vol" pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "rec": pcm0: Soft PCM mixer ENABLED pcm0: sndbuf_setmap ef90000, 4000; 0xcca04000 -> ef90000 pcm0: sndbuf_setmap ef83000, 4000; 0xcca08000 -> ef83000 pcm0: <HDA Codec: Sigmatel STAC9220> pcm0: <HDA Driver Revision: 20060928_024> pcm0: pcm0: +-------------------+ pcm0: | DUMPING HDA NODES | pcm0: +-------------------+ pcm0: pcm0: Default Parameter pcm0: ----------------- pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 11 16 22 32 44 48 pcm0: IN amp: 0x00000000 pcm0: OUT amp: 0x80051f1f pcm0: pcm0: nid: 2 [ANALOG] pcm0: name: audio output pcm0: widget_cap: 0x000d0401 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 11 16 22 32 44 48 pcm0: connections: 0 pcm0: pcm0: nid: 3 [ANALOG] pcm0: name: audio input pcm0: widget_cap: 0x001d0541 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000800 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 11 16 22 32 44 48 pcm0: connections: 1 pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 4 [DIGITAL] [DISABLED] pcm0: name: audio input pcm0: widget_cap: 0x00140311 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e0160 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 22 44 48 pcm0: connections: 1 pcm0: | pcm0: + <- nid=8 [pin: SPDIF in (none)] [DISABLED] pcm0: pcm0: nid: 5 [DIGITAL] [DISABLED] pcm0: name: audio output pcm0: widget_cap: 0x00040211 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Stream cap: 0x00000005 pcm0: Format: AC3 PCM pcm0: PCM cap: 0x000e01e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 22 32 44 48 pcm0: connections: 0 pcm0: pcm0: nid: 6 [DIGITAL] [DISABLED] pcm0: name: vendor widget pcm0: widget_cap: 0x00f30201 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 0 pcm0: pcm0: nid: 7 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300901 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000041 pcm0: connections: 3 pcm0: | pcm0: + <- nid=2 [audio output] (selected) pcm0: | pcm0: + <- nid=8 [pin: SPDIF in (none)] [DISABLED] pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 8 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF in (none) pcm0: widget_cap: 0x00430681 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00010024 pcm0: IN EAPD : UNSOL pcm0: Pin config: 0x40c001fb pcm0: Pin control: 0x00000020 IN pcm0: EAPD: 0x00000002 pcm0: connections: 0 pcm0: pcm0: nid: 9 [DIGITAL] [DISABLED] pcm0: name: pin: SPDIF out (none) pcm0: widget_cap: 0x00400301 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x404001fa pcm0: Pin control: 0x00000040 OUT pcm0: connections: 2 pcm0: | pcm0: + <- nid=5 [audio output] [DISABLED] pcm0: | pcm0: + <- nid=10 [audio selector] pcm0: pcm0: nid: 10 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030090d pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000841 pcm0: Output amp: 0x80050f00 pcm0: mute=1 step=15 size=5 offset=0 pcm0: connections: 1 pcm0: | pcm0: + <- nid=12 [audio selector] pcm0: pcm0: nid: 11 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x00300105 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Output amp: 0x80051f1f pcm0: mute=1 step=31 size=5 offset=31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=7 [audio selector] pcm0: pcm0: nid: 12 [ANALOG] pcm0: name: audio selector pcm0: widget_cap: 0x0030010d pcm0: Parse flags: 0x00000006 pcm0: Ctl flags: 0x00000041 pcm0: Output amp: 0x270400 pcm0: mute=0 step=4 size=39 offset=0 pcm0: connections: 5 pcm0: | pcm0: + <- nid=16 [pin: line in (jack)] (selected) pcm0: | pcm0: + <- nid=15 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=14 [pin: speaker (fixed)] pcm0: | pcm0: + <- nid=13 [pin: headphones out (jack)] pcm0: | pcm0: + <- nid=18 [pin: AUX (none)] [DISABLED] pcm0: pcm0: nid: 13 [ANALOG] pcm0: name: pin: headphones out (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000003f pcm0: ISC TRQD HP OUT IN : UNSOL pcm0: Pin config: 0x0321401f pcm0: Pin control: 0x00000080 HP pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 14 [ANALOG] pcm0: name: pin: speaker (fixed) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000001 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x0000003f pcm0: ISC TRQD HP OUT IN : UNSOL pcm0: Pin config: 0x90100110 pcm0: Pin control: 0x00000040 OUT pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 15 [ANALOG] pcm0: name: pin: Mic in (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000037 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x03a11023 pcm0: Pin control: 0x00000020 IN pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 16 [ANALOG] pcm0: name: pin: line in (jack) pcm0: widget_cap: 0x00400181 pcm0: Parse flags: 0x00000002 pcm0: Ctl flags: 0x00000041 pcm0: Pin cap: 0x00001737 pcm0: ISC TRQD OUT IN : UNSOL pcm0: Pin config: 0x03811020 pcm0: Pin control: 0x00000020 IN pcm0: connections: 1 pcm0: | pcm0: + <- nid=11 [audio selector] pcm0: pcm0: nid: 17 [ANALOG] [DISABLED] pcm0: name: pin: speaker (none) pcm0: widget_cap: 0x00400104 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000010 pcm0: OUT pcm0: Pin config: 0x401001fd pcm0: Pin control: 0x00000040 OUT pcm0: Output amp: 0x80051f1f pcm0: mute=1 step=31 size=5 offset=31 pcm0: connections: 1 pcm0: | pcm0: + <- nid=19 [audio mixer] pcm0: pcm0: nid: 18 [ANALOG] [DISABLED] pcm0: name: pin: AUX (none) pcm0: widget_cap: 0x00400001 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: Pin cap: 0x00000020 pcm0: IN pcm0: Pin config: 0x409001fc pcm0: Pin control: 0x00000020 IN pcm0: connections: 0 pcm0: pcm0: nid: 19 [ANALOG] pcm0: name: audio mixer pcm0: widget_cap: 0x00200100 pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000000 pcm0: connections: 1 pcm0: | pcm0: + <- nid=7 [audio selector] pcm0: pcm0: nid: 20 [ANALOG] pcm0: name: beep widget pcm0: widget_cap: 0x0070000c pcm0: Parse flags: 0x00000000 pcm0: Ctl flags: 0x00000021 pcm0: Output amp: 0x80170303 pcm0: mute=1 step=3 size=23 offset=3 pcm0: connections: 0 pcm0: pcm0: +------------------------+ pcm0: | DUMPING HDA AMPLIFIERS | pcm0: +------------------------+ pcm0: pcm0: 1: nid=10 dir=0x1 index=0 ossmask=0x00000800 ossdev=0 pcm0: 2: nid=11 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 pcm0: 3: nid=12 dir=0x1 index=0 ossmask=0x00000041 ossdev=6 pcm0: 4: nid=17 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED] pcm0: 5: nid=20 dir=0x1 index=0 ossmask=0x00000021 ossdev=5 pcm0: pcm0: +-----------------------------------+ pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS | pcm0: +-----------------------------------+ pcm0: pcm0: Master Volume (OSS: vol) pcm0: | pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000041 pcm0: | pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021 pcm0: pcm0: Line-in Volume (OSS: line) pcm0: | pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000041 pcm0: pcm0: Recording Level (OSS: rec) pcm0: | pcm0: +- nid: 10 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800 pcm0: pcm0: Speaker/Beep (OSS: speaker) pcm0: | pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021 pcm0: pcm0: Recording sources: pcm0: pcm0: nid=12 [audio selector] pcm0: | pcm0: + <- nid=16 [pin: line in (jack)] [recsrc: vol, line] pcm0: | pcm0: + <- nid=15 [pin: Mic in (jack)] pcm0: | pcm0: + <- nid=14 [pin: speaker (fixed)] pcm0: | pcm0: + <- nid=13 [pin: headphones out (jack)] pcm0: pcm0: +--------------------------------------+ pcm0: | DUMPING PCM Playback/Record Channels | pcm0: +--------------------------------------+ pcm0: pcm0: PCM Playback: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 11 16 22 32 44 48 pcm0: DAC: 2 pcm0: pcm0: PCM Record: 1 pcm0: Stream cap: 0x00000001 pcm0: Format: PCM pcm0: PCM cap: 0x000e07e0 pcm0: PCM size: 16 20 24 pcm0: PCM rate: 11 16 22 32 44 48 pcm0: ADC: 3 ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011 pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011 pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011 pcm0: PCMDIR_PLAY: Stream setup nid=2 fmt=0x00000011
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b84edfa10609280123k32045d2cs86e1aa44bfb56ed8>