Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 6 Oct 2020 13:16:42 +0300
From:      =?UTF-8?B?0KDRg9C80LXQvSDQn9Cw0LvQvtCy?= <rpalov@e-card.bg>
To:        freebsd-stable@freebsd.org
Subject:   Issues with gptboot loader
Message-ID:  <bda95d97-c8f6-81f4-198e-fd591ca6ffdf@e-card.bg>

next in thread | raw e-mail | index | archive | help
Hello all,

We have following situations with FreeBSD 12.1 Release. Updating to 
FreeBSD 12 Stable does not change the situation.

We have Server with 8T UFS root partition created on top of AVAGO 
9361-4i RAID 10 with lastest firmware. It works on FreeBSD 11.1 Stable, 
before upgrade and boot in normal fashion.

After the ugprade the OS to FreeBSD 12.1 or 12.2 it was unable to boot.

We backup the content of system disk and start playing with the RAID 
configuration, changing RAID cards and so on.

Our results are as follow with FreeBSD12.1 Release IMG:

When the RAID is 8T the booting process freezes on message "gptboot: 
invalid backup GPT header"

When we recreate the RAID of 4T it boots to mountfrom> prompt and to 
continue, we need to enter the same disk device, which is described in 
the fstab manualy, etc: ufs:/dev/da0p2

When we recreate the RAID with (500G and 2500G) it boots normal and 
mount the root partiion.

The issues described above are valid only for gptboot loader.
With zfs installed there is this message: "Shortening read at 
4294967200" from 16 to 15



Then we decide to exclude the RAID card from the setup and connect one 
6T drive to the motherboard and here the major factor of succesful boot 
becomes the presence of usb drive with freebsd install image.

When we install FeeBSD on partition with size up to 5T, the system boots 
normaly mount the root partition and the OS is ready for operations. 
Here does not matter if the flash drive is present or not.

When we install FreeBSD on the full size of the HDD 6T( eg 5.5T usable ) 
and try to boot with usb drive plugged, the booting process fails with 
message "can't load kernel".  If the flash drive is removed from the 
Server, the booting proccess goes successful.

Here we do not repeat the steps with zfsloader.

The motherboard is SUPERMICRO X11DPI-NT with lates BIOS firmware.


Is any one having issues like this ?

Is this behavior enougth for PR request ?


-- 
Chhers
Rumen Palov



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bda95d97-c8f6-81f4-198e-fd591ca6ffdf>