Date: Thu, 6 Sep 2007 22:38:17 -0400 From: "Wesley Griffin" <wgriffin@fraktured.net> To: freebsd-net@freebsd.org Subject: Country Code woes with D-Link DWL-AG530 Message-ID: <d125a150709061938l44e78dh430bc546eb4eca7c@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I have purchased a D-Link DWL-AG530 PCI NIC for my gateway and am attempting to get it working with RELENG_6_2 but am having problems and could use some help please. First, I'm using 6.2-RELEASE-p7. Relevant (I've attached the full /var/run/dmesg.boot) dmesg output: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 ath0: Ethernet address: 00:1b:11:bb:da:09 ath0: mac 10.5 phy 6.1 radio 6.3 Following some leads via google and marc, I used this page: <http://www.gentoo-wiki.com/HARDWARE_ar5212>; and this page: <http://lists.freebsd.org/pipermail/freebsd-mobile/2005-October/007243.html>; to patch if_ath.c to 'return 0' at line 4736: ----- if (!ath_hal_init_channels(ah, chans, IEEE80211_CHAN_MAX, &nchan, NULL, 0, NULL, cc, HAL_MODE_ALL, outdoor, xchanmode)) { u_int32_t rd; ath_hal_getregdomain(ah, &rd); if_printf(ifp, "unable to collect channel list from hal; " "regdomain likely %u country code %u\n", rd, cc); free(chans, M_TEMP); /* wgriffin return EINVAL; */ return 0; ----- I then ran ar5k (which I believe I found in the madwifi sources) like thus: sudo ./ar5k 0xfeab0000 0x10 but I get the following output: ----- Current value 0x0013 will change to 0x0010 Retrying eeprom write! Retrying eeprom write! [snip lots of this message] EEPROM write failed Write & read don't match 0x0010 != 0x0013 ----- and am now unsure as to what to try next. I've been pouring over the madwifi pages and google results, but cannot find anything else related. Any help would be greatly appreciated. Thanks, Wes [-- Attachment #2 --] ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 device_attach: ath0 attach returned 22 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863867021 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a xl1: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...1 1 0 0 done All buffers synced. Uptime: 7m38s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:40:53 UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121491456 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL ZUUL> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 device_attach: ath0 attach returned 22 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863867684 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a xl1: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...3 1 1 0 0 done All buffers synced. Uptime: 37m35s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:40:53 UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121507840 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 device_attach: ath0 attach returned 22 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863868055 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a xl1: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 1 0 0 0 done All buffers synced. Uptime: 50m49s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Aug 31 21:30:13 EDT 2007 wgriffin@deguchi.internal.fraktured.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121507840 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 ath0: Ethernet address: 00:1b:11:bb:da:09 ath0: mac 10.5 phy 6.1 radio 6.3 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863866194 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a ath0: invalid channel (NULL) ath0: invalid channel (NULL) xl1: link state changed to UP ath0: invalid channel (NULL) Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 1 0 0 done All buffers synced. Uptime: 2d22h24m53s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:40:53 UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121507840 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 device_attach: ath0 attach returned 22 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863866151 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a xl1: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 0 1 0 0 done All buffers synced. Uptime: 1d19h25m44s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p7 #2: Wed Sep 5 15:19:42 EDT 2007 wgriffin@deguchi.internal.fraktured.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121507840 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 device_attach: ath0 attach returned 22 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863866312 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a xl1: link state changed to UP arplookup 0.0.0.0 failed: host is not on local network Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...2 1 0 0 done All buffers synced. Uptime: 1h1m16s Rebooting... Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE-p7 #3: Wed Sep 5 16:22:55 EDT 2007 wgriffin@deguchi.internal.fraktured.net:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 133955584 (127 MB) avail memory = 121507840 (115 MB) pnpbios: Bad PnP BIOS data checksum kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 3 at device 10.0 on pci2 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:10:5a:c7:fb:c6 xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xdf00-0xdf3f irq 7 at device 11.0 on pci2 miibus1: <MII bus> on xl1 nsphy0: <DP83840 10/100 media interface> on miibus1 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl1: Ethernet address: 00:60:08:0d:85:fd ath0: <Atheros 5212> mem 0xfeab0000-0xfeabffff irq 9 at device 12.0 on pci2 ath0: unable to collect channel list from hal; regdomain likely 19 country code 0 ath0: Ethernet address: 00:1b:11:bb:da:09 ath0: mac 10.5 phy 6.1 radio 6.3 pci2: <simple comms> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863867594 Hz quality 800 Timecounters tick every 1.000 msec ad0: 38166MB <WDC WD400BB-75AUA1 18.20D18> at ata0-master UDMA100 ad1: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-slave UDMA100 acd0: DVDROM <NEC DV-5700A/3.07> at ata1-master UDMA33 acd1: CDRW <LG CD-RW CED-8080B/1.04> at ata1-slave PIO4 Trying to mount root from ufs:/dev/ad0s1a ath0: invalid channel (NULL) ath0: invalid channel (NULL)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d125a150709061938l44e78dh430bc546eb4eca7c>