Date: Sat, 17 Oct 2009 23:50:51 +0100 From: krad <kraduk@googlemail.com> To: Manolis Kiagias <sonicy@otenet.gr> Cc: PJ <af.gourmet@videotron.ca>, "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org> Subject: Re: I hate to bitch but bitch I must Message-ID: <d36406630910171550s652b8bbu9ffaffd91b75aaa6@mail.gmail.com> In-Reply-To: <4ADA49AD.9040304@otenet.gr> References: <4AD8EB8F.9010900@videotron.ca> <4AD8F651.1000001@otenet.gr> <4AD8FD82.8050306@videotron.ca> <4AD90066.60606@otenet.gr> <4ADA32D2.2020802@videotron.ca> <4ADA49AD.9040304@otenet.gr>
next in thread | previous in thread | raw e-mail | index | archive | help
2009/10/17 Manolis Kiagias <sonicy@otenet.gr> > PJ wrote: > > Manolis Kiagias wrote: > > > >> PJ wrote: > >> > >> > >>> Manolis, my state of mind is quite clear... and I'm coping with > >>> everything quite allright... I'm not about to get mad at anyone or > >>> anything... > >>> but tell me, honestly, when you see the stuff I have described above? > >>> Woldn't that confuse anyone in their right mind? > >>> > >>> > >>> > >>> > >> I am sorry, but there is something here, either some mistake on your > >> part or some other weird problem on your system I can not think of. > >> > >> I don't seem to remember glabel ever failing to store metadata, unless > >> 1) The device is non-existing 2) The device is mounted. > >> As a matter of fact, I did the glabel stuff on a machine a few hours > >> ago. This was already fully installed, I rebooted single user and was > >> done in less than 2 minutes. > >> And yes, if you get a metadata error, it means nothing was done so you > >> are *not* to go and change fstab! > >> > >> Could you please send us /etc/fstab and the results of ls /dev/ad* > >> > >> > > Here are the outputs: > > > > fstab: > > # Device Mountpoint FStype Options Dump Pass# > > /dev/ad12s1b none swap sw 0 0 > > /dev/ad12s1a / ufs rw 1 1 > > /dev/ad12s1h /backups ufs rw 2 2 > > /dev/ad12s1g /home ufs rw 2 2 > > /dev/ad12s1d /tmp ufs rw 2 2 > > /dev/ad12s1f /usr ufs rw 2 2 > > /dev/ad12s1e /var ufs rw 2 2 > > /dev/acd0 /cdrom cd9660 ro,noauto 0 0 > > linproc /usr/compat/linux/proc linprocfs rw 0 0 > > > > df: > > Filesystem 1K-blocks Used Avail Capacity Mounted on > > /dev/ad12s1a 2026030 319112 1544836 17% / > > devfs 1 1 0 100% /dev > > /dev/ad12s1h 50777034 4 46714868 0% /backups > > /dev/ad12s1g 50777034 6276538 40438334 13% /home > > /dev/ad12s1d 4058062 36 3733382 0% /tmp > > /dev/ad12s1f 50777034 5729324 40985548 12% /usr > > /dev/ad12s1e 2026030 176070 1687878 9% /var > > linprocfs 4 4 0 100% /usr/compat/linux/proc > > > > # ls /dev/ad* > > crw-r----- 1 root operator 0, 97 Oct 17 16:36 /dev/ad0 > > crw-r----- 1 root operator 0, 103 Oct 17 16:36 /dev/ad0s1 > > crw-r----- 1 root operator 0, 101 Oct 17 16:36 /dev/ad10 > > crw-r----- 1 root operator 0, 106 Oct 17 16:36 /dev/ad10s1 > > crw-r----- 1 root operator 0, 121 Oct 17 16:36 /dev/ad10s1a > > crw-r----- 1 root operator 0, 122 Oct 17 16:36 /dev/ad10s1b > > crw-r----- 1 root operator 0, 123 Oct 17 16:36 /dev/ad10s1c > > crw-r----- 1 root operator 0, 124 Oct 17 16:36 /dev/ad10s1d > > crw-r----- 1 root operator 0, 125 Oct 17 16:36 /dev/ad10s1e > > crw-r----- 1 root operator 0, 126 Oct 17 16:36 /dev/ad10s1f > > crw-r----- 1 root operator 0, 127 Oct 17 16:36 /dev/ad10s1g > > crw-r----- 1 root operator 0, 102 Oct 17 16:36 /dev/ad12 > > crw-r----- 1 root operator 0, 107 Oct 17 16:36 /dev/ad12s1 > > crw-r----- 1 root operator 0, 128 Oct 17 16:36 /dev/ad12s1a > > crw-r----- 1 root operator 0, 129 Oct 17 16:36 /dev/ad12s1b > > crw-r----- 1 root operator 0, 130 Oct 17 16:36 /dev/ad12s1c > > crw-r----- 1 root operator 0, 131 Oct 17 16:36 /dev/ad12s1d > > crw-r----- 1 root operator 0, 132 Oct 17 16:36 /dev/ad12s1e > > crw-r----- 1 root operator 0, 133 Oct 17 16:36 /dev/ad12s1f > > crw-r----- 1 root operator 0, 134 Oct 17 16:36 /dev/ad12s1g > > crw-r----- 1 root operator 0, 135 Oct 17 16:36 /dev/ad12s1h > > crw-r----- 1 root operator 0, 99 Oct 17 16:36 /dev/ad4 > > crw-r----- 1 root operator 0, 104 Oct 17 16:36 /dev/ad4s1 > > crw-r----- 1 root operator 0, 108 Oct 17 16:36 /dev/ad4s1a > > crw-r----- 1 root operator 0, 109 Oct 17 16:36 /dev/ad4s1b > > crw-r----- 1 root operator 0, 110 Oct 17 16:36 /dev/ad4s1c > > crw-r----- 1 root operator 0, 111 Oct 17 16:36 /dev/ad4s1d > > crw-r----- 1 root operator 0, 112 Oct 17 16:36 /dev/ad4s1e > > crw-r----- 1 root operator 0, 113 Oct 17 16:36 /dev/ad4s1f > > crw-r----- 1 root operator 0, 114 Oct 17 16:36 /dev/ad4s1g > > crw-r----- 1 root operator 0, 100 Oct 17 16:36 /dev/ad6 > > crw-r----- 1 root operator 0, 105 Oct 17 16:36 /dev/ad6s1 > > crw-r----- 1 root operator 0, 115 Oct 17 16:36 /dev/ad6s1a > > crw-r----- 1 root operator 0, 116 Oct 17 16:36 /dev/ad6s1b > > crw-r----- 1 root operator 0, 117 Oct 17 16:36 /dev/ad6s1c > > crw-r----- 1 root operator 0, 118 Oct 17 16:36 /dev/ad6s1d > > crw-r----- 1 root operator 0, 119 Oct 17 16:36 /dev/ad6s1e > > crw-r----- 1 root operator 0, 120 Oct 17 16:36 /dev/ad6s1f > > > > Sorry, but I don't see what this is going to tell you... ad0 is XP; ad10 > > is minimal FreeBSD 7.2; ad12 is 7.2 on 500gb; ad4 is 7.2 on 80gb; and > > ad6 is messed up FBSD I'm cheking & setting up with clone of ad12 > > (dump/restore) > > Now I will try the glabel again... > > # shutdown now > > # glabel label rootfs /dev/ad12s1a > > glabel: Can't store metadata on /dev/ad0s1a > > > > > > shutdown now will get you into single user mode, but / is still mounted > read-write. > Do a shutdown -r now and press 4 on the loader to get into single user > mode. > When the single user mode finishes booting and you get to the # prompt, > '/' will be mounted read only > and glabel will succeed > > > manual: "it is assumed that a single ATA disk is used, which is > > currently recognized by the system as ad0. It is also assumed that the > > standard FreeBSD partition scheme is used, with /, /var, /usr and /tmp > > file systems, as well as a swap partition." > > > > Now, does that mean that glabel does not work if there are several disks > > on the system... it certainly does not say so nor does it adv ertise > > that this would not work if there are several ATA disks present.. > > Previously I had also tried a reboot press 4 with exactly the same > > results.... > > > > > > Aha, as I said above then. > If you've done this and you are still getting the can't store metadata > message, > I am really out of ideas. > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" > easiest way is to boot in on a live cd/usb label it all up with tunefs and edit the fstabs then reboot off disks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d36406630910171550s652b8bbu9ffaffd91b75aaa6>