Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Oct 2020 10:39:26 +0300
From:      Andriy Gapon <avg@FreeBSD.org>
To:        Cassiano Peixoto <peixotocassiano@gmail.com>, freebsd-stable@freebsd.org,  freebsd-current@freebsd.org
Subject:   Re: Zpool doesn't boot anymore after FreeBSD 12.1
Message-ID:  <e109cba7-2716-7a83-3d39-66de48b93c8b@FreeBSD.org>
In-Reply-To: <CAJajdNV0nGdhAm6cgs2SKMBsY=Hi1Azb8fA_0PFrLUuejCT8ag@mail.gmail.com>
References:  <CAJajdNWgiKyd1jmX4uPogWU4Ty=OiEgDnQGaoLZUWgj_pr9WKw@mail.gmail.com> <CAJajdNXPhGj-mKj6R_N94Bfnhvm=nHr3RwfBm4qoTB3g_=6kGw@mail.gmail.com> <CAJajdNV0nGdhAm6cgs2SKMBsY=Hi1Azb8fA_0PFrLUuejCT8ag@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 21/10/2020 15:20, Cassiano Peixoto wrote:
> Hi there,
> 
> Anyone can help please? I've many servers with this same issue. Thanks

Can you try to replace /boot/zfsloader with zfsloader from other FreeBSD versions?
E.g., 12.0, 12.2-RC, 11.4, recent snapshot of the CURRENT?

> On Fri, Oct 16, 2020 at 10:24 AM Cassiano Peixoto <peixotocassiano@gmail.com>
> wrote:
> 
>> Hi there,
>>
>> I have a FreeBSD 12.1-STABLE running on VMWARE with one disk. Then I added two more disks to expand my pool. BTW I already did it many time with no issues.
>>
>> I ran:
>>
>> # zpool status
>>   pool: zroot
>>  state: ONLINE
>> status: Some supported features are not enabled on the pool. The pool can
>> 	still be used, but some features are unavailable.
>> action: Enable all features using 'zpool upgrade'. Once this is done,
>> 	the pool may no longer be accessible by software that does not support
>> 	the features. See zpool-features(7) for details.
>>   scan: none requested
>> config:
>>
>> 	NAME         STATE     READ WRITE CKSUM
>> 	zroot        ONLINE       0     0     0
>> 	  gpt/disk0  ONLINE       0     0     0
>>
>> errors: No known data errors
>>
>> # zpool add -f zroot da1
>> # zpool add -f zroot da2
>> # zpool status
>>   pool: zroot
>>  state: ONLINE
>>   scan: none requested
>> config:
>>
>> 	NAME         STATE     READ WRITE CKSUM
>> 	zroot        ONLINE       0     0     0
>> 	  gpt/disk0  ONLINE       0     0     0
>> 	  da1        ONLINE       0     0     0
>> 	  da2        ONLINE       0     0     0
>>
>> errors: No known data errors
>> # reboot
>>
>> Then my system doesn’t boot anymore, i got the following error:
>>
>> gptzfsboot: error 4 lba 2038346899
>> gptzfsboot: error 4 lba 1361327267
>> /boot/config: -Dh
>>
>> BTX loader 1.00  BTX version is 1.02
>> Consoles: internal video/keyboard serial port
>> BIOS drive A: is fd0
>> BIOS drive C: is disk0
>> BIOS drive D: is disk1
>> BIOS drive E: is disk2
>> BIOS drive F: is disk3
>> BIOS drive G: is disk4
>> BIOS drive H: is disk5
>> ZFS: i/o error - all block copies unavailable
>> ZFS: failed to read pool zroot directory object
>> BIOS 638kB/3143616kB available memory
>>
>> FreeBSD/x86 bootstrap loader, Revision 1.1
>> ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>>
>> Type '?' for list of commands, 'help' for more datailed help.
>> OK
>>
>> I can import my pool with no problems using the lived, but I could not fix it.
>>
>> Seems a bug after 12.1-STABLE. Please, anyone can take a look ok that?
>>
>> Thanks.
>>
>>
>>
>>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
> 




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?e109cba7-2716-7a83-3d39-66de48b93c8b>