Date: Wed, 31 Jan 2007 23:13:56 +0100 From: "=?ISO-8859-1?Q?G=E1bor_G=E1bris?=" <gabrisgabor@gmail.com> To: freebsd-questions@freebsd.org Subject: Synaptics touchpad freezes Message-ID: <ebce77080701311413o186756f7w1c5bf955df8212d0@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi!
I have a problem with my synaptics touchpad under FreeBSD 6.2 on an
Albacomp Eco Traveller V4 laptop (AFAIK a rebranded Clevo M660S). I
have 'hw.psm.synaptics_support=1' in my /boot/loader.conf an the
synaptics driver for X from Ports.
During the daily use of X (browsing, etc.) the mouse cursor freezes at
ranom times for intervals of about 3-5 seconds, than it gets back to
work. But the freezes are likely to occur serially, with some seconds
between them.
During this the following messages show up in dmesg:
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
I attach a dmesg before the problem and after the freezes occur.
If anyobody has the same problem or know what causes it or (even
better) knows how to solve it please let me know!
Thanks
Gábris Gábor
[-- Attachment #2 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/uhid already exists!
Module uhub/uhid failed to register: 17
module_register: module uhub/umass already exists!
Module uhub/umass failed to register: 17
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xc109<SSE3,MON,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
real memory = 468254720 (446 MB)
avail memory = 448745472 (427 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f340 StartNode 0xc2e9f340 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f1e0 StartNode 0xc2e9f1e0 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f080 StartNode 0xc2e9f080 ReturnNode 0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
acpi_video0: <ACPI video extension> mem 0xf0000000-0xf3ffffff,0xf4000000-0xf4ffffff irq 16 at device 0.0 on pci1
cbb0: <PCI-CardBus Bridge> at device 14.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci0: <memory, flash> at device 14.1 (no driver attached)
pci0: <base peripheral> at device 14.2 (no driver attached)
pci0: <memory, flash> at device 14.4 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1400-0x140f,0x1000-0x10ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1410-0x141f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0x1440-0x145f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1460-0x147f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x1480-0x149f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x14a0-0x14bf irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf5200000-0xf52000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0x1800-0x18ff irq 22 at device 17.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x56494123)>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x2000-0x20ff mem 0xf5200400-0xf52004ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:90:f5:55:49:7d
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcd800-0xcf7ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596013332 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PHILIPS DVD+/-RW SDVD8820/AX04> at ata0-master UDMA33
ad2: 57241MB <SAMSUNG HM060HC YJ100-19> at ata1-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW SDVD8820 AX04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad2s3a
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
can't re-use a leaf (directional_scrolls)!
can't re-use a leaf (low_speed_threshold)!
can't re-use a leaf (min_movement)!
can't re-use a leaf (squelch_level)!
[-- Attachment #3 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
module_register: module uhub/uhid already exists!
Module uhub/uhid failed to register: 17
module_register: module uhub/umass already exists!
Module uhub/umass failed to register: 17
module_register: module pci/vr already exists!
Module pci/vr failed to register: 17
module_register: module vr/miibus already exists!
Module vr/miibus failed to register: 17
ACPI APIC Table: <PTLTD APIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xc109<SSE3,MON,TM2,<b14>,<b15>>
AMD Features=0x100000<NX>
real memory = 468254720 (446 MB)
avail memory = 448745472 (427 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f340 StartNode 0xc2e9f340 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f1e0 StartNode 0xc2e9f1e0 ReturnNode 0
ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LNKH] in namespace, AE_NOT_FOUND
SearchNode 0xc2e9f080 StartNode 0xc2e9f080 ReturnNode 0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
acpi_video0: <ACPI video extension> mem 0xf0000000-0xf3ffffff,0xf4000000-0xf4ffffff irq 16 at device 0.0 on pci1
cbb0: <PCI-CardBus Bridge> at device 14.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci0: <memory, flash> at device 14.1 (no driver attached)
pci0: <base peripheral> at device 14.2 (no driver attached)
pci0: <memory, flash> at device 14.4 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1400-0x140f,0x1000-0x10ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1410-0x141f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0x1440-0x145f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1460-0x147f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0x1480-0x149f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x14a0-0x14bf irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf5200000-0xf52000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0x1800-0x18ff irq 22 at device 17.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x56494123)>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x2000-0x20ff mem 0xf5200400-0xf52004ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:90:f5:55:49:7d
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcd800-0xcf7ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1596013332 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <PHILIPS DVD+/-RW SDVD8820/AX04> at ata0-master UDMA33
ad2: 57241MB <SAMSUNG HM060HC YJ100-19> at ata1-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PHILIPS DVD+-RW SDVD8820 AX04> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from ufs:/dev/ad2s3a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ebce77080701311413o186756f7w1c5bf955df8212d0>