Date: Wed, 26 Dec 2007 23:17:48 -0800 From: "Jeff Colter" <jeff.colter@gmail.com> To: openoffice@FreeBSD.org Subject: Problem with openoffice 2.3.1 on freebsd... Message-ID: <fb5891a50712262317j642ea773o4cdaa12cae0aa392@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I just installed Open Office 2.3.1 from ports and have a problem. I
couldn't find any other place to find an answer.
Any time I try to save a document it hangs. The document gets saved, but
the system freezes and I have to reboot.
Here is a printout of my system status if that helps (I'm running PCBSD).
Do you have any suggestions or where I might find some answers?
Thanks in advance, Jeff
PC-BSD 1.4.1.1 Diagnostic Sheet
Generated: Wed Dec 26 23:02:12 PST 2007
-----------------Dmesg Output-------------------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-PRERELEASE #2: Wed Nov 7 10:54:48 EST 2007
root@pcbsd:/usr/obj/usr/src/sys/PCBSD
ACPI APIC Table: <DELL PESC420>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
Logical CPUs per core: 2
real memory = 3211313152 (3062 MB)
avail memory = 3137388544 (2992 MB)
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr2310_00: RocketRAID 231x/230x controller driver v2.0 (Mar 23 2007
16:25:56)
acpi0: <DELL PESC420> on motherboard
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rr2310_000: <sx508x> port 0xdc00-0xdcff mem 0xdfd00000-0xdfdfffff irq 16 at
device 0.0 on pci1
rr2310_00: adapter at PCI 1:0:0, IRQ 16
pci0: <display, VGA> at device 2.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xdfcf0000-0xdfcfffff irq
16 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:11:11:c3:7a:e2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0xff80-0xff9f irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0xff60-0xff7f irq 22 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0xff40-0xff5f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0xff20-0xff3f irq 23 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xffa80800-0xffa80bff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <multimedia, audio> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port
0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf mem
0xdff3fc00-0xdff3ffff irq 20 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc97ff,0xc9800-0xd17ff,0xd1800-0xd2fff,0xd3000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2793019537 Hz quality 800
Timecounters tick every 1.000 msec
rr2310_00: start channel [0,0]
rr2310_00: start channel [0,1]
rr2310_00: start channel [0,2]
rr2310_00: start channel [0,3]
rr2310_00: channel [0,0] started successfully
rr2310_00: channel [0,1] started successfully
rr2310_00: channel [0,2]: failed to perform Hard Reset
rr2310_00: channel [0,3]: failed to perform Hard Reset
rr2310_000: [GIANT-LOCKED]
da0 at rr2310_000 bus 0 target 0 lun 0
da0: <HPT DISK 0_0 4.00> Fixed Direct Access SCSI-0 device
da0: 238400MB (488243200 512 byte sectors: 255H 63S/T 30391C)
acd0: CDROM <GCR-8483B/1.07> at ata0-master UDMA33
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-ROM GCR-8483B 1.07> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP
pcm0: <CMedia CMI8738> port 0xcc00-0xccff irq 17 at device 1.0 on pci4
-----------------Messages Output----------------------
Dec 26 22:03:47 pcbsd kernel: da0: <HPT DISK 0_0 4.00> Fixed Direct Access
SCSI-0 device
Dec 26 22:03:47 pcbsd kernel: da0: 238400MB (488243200 512 byte sectors:
255H 63S/T 30391C)
Dec 26 22:03:47 pcbsd kernel: acd0: CDROM <GCR-8483B/1.07> at ata0-master
UDMA33
Dec 26 22:03:47 pcbsd kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST
asc=0x24 ascq=0x00
Dec 26 22:03:47 pcbsd kernel: cd0 at ata0 bus 0 target 0 lun 0
Dec 26 22:03:47 pcbsd kernel: cd0: <HL-DT-ST CD-ROM GCR-8483B 1.07>
Removable CD-ROM SCSI-0 device
Dec 26 22:03:47 pcbsd kernel: cd0: 33.000MB/s transfers
Dec 26 22:03:47 pcbsd kernel: cd0: Attempt to query device size failed: NOT
READY, Medium not present
Dec 26 22:03:47 pcbsd kernel: Trying to mount root from ufs:/dev/da0s1a
Dec 26 22:03:48 pcbsd kernel: bge0: link state changed to UP
Dec 26 22:03:49 pcbsd ntpd[983]: ntpd 4.2.0-a Tue Nov 27 10:09:01 EST 2007
(1)
Dec 26 22:03:51 pcbsd kernel: pcm0: <CMedia CMI8738> port 0xcc00-0xccff irq
17 at device 1.0 on pci4
Dec 26 22:04:29 pcbsd su: Jeff to root on /dev/ttyp3
Dec 26 22:04:30 pcbsd su: Jeff to root on /dev/ttyp3
Dec 26 22:12:22 pcbsd ntpd[983]: time reset +0.151426 s
Dec 26 22:12:22 pcbsd ntpd[983]: kernel time sync disabled 2041
Dec 26 22:22:01 pcbsd ntpd[983]: kernel time sync enabled 2001
Dec 26 22:27:12 pcbsd su: Jeff to root on /dev/ttyp5
Dec 26 22:27:13 pcbsd su: Jeff to root on /dev/ttyp5
Dec 26 23:01:43 pcbsd su: Jeff to root on /dev/ttyp4
------------------RC File-----------------------------
background_dhclient="YES"
compat5x_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
moused_type="auto"
moused_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
sendmail_enable="NO"
sendmail_rebuild_aliases="YES"
#Enable samba server
samba_enable="YES"
# Disable LPD
lpd_enable="NO"
# Enable CUPS
cupsd_enable="YES"
enable_linux="YES"
# FSCK Enhancements
fsck_y_enable="YES"
background_fsck="NO"
# tmpmfs Flags
tmpmfs="YES"
tmpsize="800m"
tmpmfs_flags="-S"
# Denyhosts Startup
denyhosts_enable="YES"
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive" # set CPU frequency
# enable HALd
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"
# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"
# ntpdate is deprecated and will eventually be removed from the distribution
since
# the same functionality is available in ntpd(8).
# Without "ntpd_sync_on_start" option, ntpd refuses to perform an
# initial correction if the clock offset is too large.
#
ntpd_enable="YES"
ntpd_sync_on_start="YES"
# Enable the firewall
pf_rules="/etc/pf.conf"
pf_rules_enable="YES"
pf_enable="YES"
pf_flags=""
snddetect_enable="YES"
mixer_enable="YES"
bsdstats_enable="YES"
hostname="pcbsd"
ifconfig_bge0="inet 192.168.1.10 netmask 255.255.255.0"
# Added for Drupal Virtual Hosts
ifconfig_bge0_alias0="inet 192.168.1.11 netmask 255.255.255.255"
ifconfig_bge0_alias1="inet 192.168.1.12 netmask 255.255.255.255"
ifconfig_bge0_alias2="inet 192.168.1.13 netmask 255.255.255.255"
ifconfig_bge0_alias3="inet 192.168.1.14 netmask 255.255.255.255"
ifconfig_bge0_alias4="inet 192.168.1.15 netmask 255.255.255.255"
ifconfig_bge0_alias5="inet 192.168.1.16 netmask 255.255.255.255"
ifconfig_bge0_alias6="inet 192.168.1.17 netmask 255.255.255.255"
ifconfig_bge0_alias7="inet 192.168.1.18 netmask 255.255.255.255"
mysql_enable="yes"
apache22_enable="yes"
cron_enable="yes"
ddclient_enable="yes"
accf_http_load="yes"
defaultrouter="192.168.1.1"
webmin_enable="YES"
------------------Loader File-------------------------
linux_load="YES"
ulpt_load="YES"
vesa_load="YES"
splash_pcx_load="YES"
bitmap_load="YES"
bitmap_name="/boot/loading-screen.pcx"
hw.ata.atapi_dma="1"
autoboot_delay="2"
beastie_disable="NO"
rr2310_00_load="YES"
accf_http_load="YES"
------------------Free Space--------------------------
Filesystem 1M-blocks Used Avail Capacity Mounted on
/dev/da0s1a 484 250 194 56% /
devfs 0 0 0 100% /dev
/dev/da0s1e 48421 234 44313 1% /var
/dev/da0s1f 2901 3 2665 0% /var/tmp
/dev/da0s1g 176170 4623 157453 3% /usr
linprocfs 0 0 0 100% /compat/linux/proc
/dev/md0 771 0 709 0% /tmp
------------------System Processes--------------------
last pid: 48189; load averages: 0.30, 0.17, 0.17 up 0+00:59:16
23:02:12
106 processes: 3 running, 103 sleeping
Mem: 358M Active, 354M Inact, 138M Wired, 8048K Cache, 112M Buf, 2138M Free
Swap: 2909M Total, 2909M Free
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
1409 root 1 96 0 56756K 47212K select 3:09 2.98% Xorg
2268 Jeff 1 96 0 24732K 20044K RUN 3:08 2.69%
npviewer.bin
48025 root 1 96 0 26516K 22520K select 0:01 0.58% kcmshell
1720 Jeff 4 20 0 141M 130M kserel 3:42 0.00%firefox-bin
1616 Jeff 5 20 0 55964K 44704K kserel 1:06 0.00% amarokapp
1687 Jeff 1 96 0 26356K 21936K select 0:20 0.00% kdeinit
1629 Jeff 1 96 0 32176K 25768K select 0:04 0.00% kdeinit
1537 Jeff 1 96 0 29376K 24160K select 0:03 0.00% kdeinit
1592 Jeff 3 20 -76 12032K 8744K kserel 0:03 0.00% artsd
1602 Jeff 1 96 0 24836K 20904K select 0:03 0.00% kget
944 root 1 8 0 1724K 1248K wait 0:03 0.00% sh
1545 Jeff 1 96 0 27296K 21932K select 0:02 0.00% kdeinit
1560 Jeff 1 96 0 31316K 26932K select 0:02 0.00% kdeinit
1178 root 1 96 0 2852K 1636K select 0:01
0.00%hald-addon-storage
1736 root 1 96 0 37356K 31620K select 0:01 0.00% konqueror
1558 Jeff 1 96 0 27792K 23744K select 0:01 0.00% kdeinit
1164 mysql 7 20 0 494M 69524K kserel 0:01 0.00% mysqld
1364 root 1 96 0 1432K 904K select 0:01 0.00% moused
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?fb5891a50712262317j642ea773o4cdaa12cae0aa392>