Date: Mon, 01 Mar 2010 22:30:16 +0100 From: "Ronald Klop" <ronald-freebsd8@klop.yi.org> To: "Ruben de Groot" <mail25@bzerk.org>, stable@freebsd.org Subject: Re: stable-8 regression: time stands still Message-ID: <op.u8wrcqh18527sy@212-123-145-58.ip.telfort.nl> In-Reply-To: <20100301211441.GB99170@ei.bzerk.org> References: <20100301203450.GA99170@ei.bzerk.org> <20100301211441.GB99170@ei.bzerk.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Ruben, Some shots in the dark. - Do you run powerd? Try to disable it. - What is your output of 'sysctl kern.timecounter'? Maybe try setting =20 another timecounter. - Maybe you shouldn't name your computer 'ill child' in french. :-) Ronald. On Mon, 01 Mar 2010 22:14:41 +0100, Ruben de Groot <mail25@bzerk.org> =20 wrote: > > Forgot to mention. The kernel is GENERIC + IPFIREWALL* and IPDIVERT > options; nothing else. > I also build a RELEASE_8_0 kernel and it shows the same problems, so > it's not just a recent -stable issue. > > On Mon, Mar 01, 2010 at 09:34:50PM +0100, Ruben de Groot typed: >> >> Hi, >> >> After upgrading my 7.2-PRERELEASE system to 8-stable I encountered >> some very strange problems, most obvious: >> >> - startup would hang on starting devd, only continuing after a ^C >> >> - reboot would hang, but reboot -q would work. >> >> - nfs clients would report strange locking problems. >> >> Now I've found that probably the real problem here is that NO TIME >> IS PASSING (!!). Successively calling 'date' will allways give me >> the exact same time to the second. >> A 'sleep 1' will hang indefinetely. >> >> >> The BIOS is OK. After (and only after) a reboot, time will be updated = to >> the time of reboot, but stay there forever after. >> >> Before I go back to 7.2 (tested there are still no problems >> there with a livecd) maybe someone want to shed some light on this. >> I've attached dmesg.boot. >> >> cheers, >> Ruben >> > >> Copyright (c) 1992-2009 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 19= 94 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 8.0-RELEASE-p2 #6: Sun Feb 21 15:45:07 CET 2010 >> root@malenfant.lan:/usr/obj/usr/src/sys/MALENFANT >> module_register: module g_label already exists! >> Module g_label failed to register: 17 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2700.11-MHz =20 >> 686-class CPU) >> Origin =3D "AuthenticAMD" Id =3D 0x60fb2 Stepping =3D 2 >> Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MT= RR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> Features2=3D0x2001<SSE3,CX16> >> AMD =20 >> Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> >> AMD Features2=3D0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> >> TSC: P-state invariant >> real memory =3D 2147483648 (2048 MB) >> avail memory =3D 1958805504 (1868 MB) >> ACPI APIC Table: <090908 APIC1020> >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> kbd1 at kbdmux0 >> acpi0: <090908 RSDT1020> on motherboard >> acpi0: [ITHREAD] >> acpi0: Power Button (fixed) >> acpi0: reservation of ffb80000, 80000 (3) failed >> acpi0: reservation of fff00000, 100000 (3) failed >> acpi0: reservation of 0, a0000 (3) failed >> acpi0: reservation of 100000, 77f00000 (3) failed >> ACPI HPET table warning: Sequence is non-zero (2) >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff o= n =20 >> acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 900 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem =20 >> 0xf0000000-0xf7ffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq = =20 >> 18 at device 5.0 on pci1 >> pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0xd800-0xd8ff= =20 >> mem 0xfeaff000-0xfeafffff irq 17 at device 0.0 on pci2 >> re0: Using 1 MSI messages >> re0: Chip rev. 0x34000000 >> re0: MAC rev. 0x00000000 >> miibus0: <MII bus> on re0 >> rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 >> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> re0: Ethernet address: 00:1f:e2:6a:ac:35 >> re0: [FILTER] >> atapci0: <ATI IXP600 SATA300 controller> port =20 >> 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f = =20 >> mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0 >> atapci0: [ITHREAD] >> atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported >> ata2: <ATA channel 0> on atapci0 >> ata2: port is not ready (timeout 0ms) tfd =3D 000001d0 >> ata2: software reset clear timeout >> ata2: [ITHREAD] >> ata3: <ATA channel 1> on atapci0 >> ata3: port is not ready (timeout 0ms) tfd =3D 000001d0 >> ata3: software reset clear timeout >> ata3: [ITHREAD] >> ata4: <ATA channel 2> on atapci0 >> ata4: [ITHREAD] >> ata5: <ATA channel 3> on atapci0 >> ata5: [ITHREAD] >> ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 1= 6 =20 >> at device 19.0 on pci0 >> ohci0: [ITHREAD] >> usbus0: <OHCI (generic) USB controller> on ohci0 >> ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 1= 7 =20 >> at device 19.1 on pci0 >> ohci1: [ITHREAD] >> usbus1: <OHCI (generic) USB controller> on ohci1 >> ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 1= 8 =20 >> at device 19.2 on pci0 >> ohci2: [ITHREAD] >> usbus2: <OHCI (generic) USB controller> on ohci2 >> ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 1= 7 =20 >> at device 19.3 on pci0 >> ohci3: [ITHREAD] >> usbus3: <OHCI (generic) USB controller> on ohci3 >> ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 1= 8 =20 >> at device 19.4 on pci0 >> ohci4: [ITHREAD] >> usbus4: <OHCI (generic) USB controller> on ohci4 >> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff =20 >> irq 19 at device 19.5 on pci0 >> ehci0: [ITHREAD] >> usbus5: EHCI version 1.0 >> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 >> pci0: <serial bus, SMBus> at device 20.0 (no driver attached) >> atapci1: <ATI IXP600 UDMA133 controller> port =20 >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pc= i0 >> ata0: <ATA channel 0> on atapci1 >> ata0: [ITHREAD] >> hdac0: <ATI SB600 High Definition Audio Controller> mem =20 >> 0xfe7f4000-0xfe7f7fff irq 16 at device 20.2 on pci0 >> hdac0: HDA Driver Revision: 20090624_0136 >> hdac0: [ITHREAD] >> isab0: <PCI-ISA bridge> at device 20.3 on pci0 >> isa0: <ISA bus> on isab0 >> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> ath0: <Atheros 5212> mem 0xfebf0000-0xfebfffff irq 20 at device 0.0 on= =20 >> pci3 >> ath0: [ITHREAD] >> ath0: AR2413 mac 7.9 RF2413 phy 4.5 >> rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem =20 >> 0xfebefc00-0xfebefcff irq 21 at device 1.0 on pci3 >> miibus1: <MII bus> on rl0 >> rlphy1: <RealTek internal media interface> PHY 0 on miibus1 >> rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> rl0: Ethernet address: 00:0e:2e:55:b1:9b >> rl0: [ITHREAD] >> acpi_button0: <Power Button> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi= 0 >> uart0: [FILTER] >> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 >> uart1: [FILTER] >> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 >> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >> ppc0: [ITHREAD] >> ppbus0: <Parallel port bus> on ppc0 >> plip0: <PLIP network interface> on ppbus0 >> plip0: [ITHREAD] >> lpt0: <Printer> on ppbus0 >> lpt0: [ITHREAD] >> lpt0: Interrupt-driven port >> ppi0: <Parallel I/O> on ppbus0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> atkbd0: [ITHREAD] >> cpu0: <ACPI CPU> on acpi0 >> acpi_throttle0: <ACPI CPU Throttling> on cpu0 >> acpi_throttle0: CLK_VAL field overlaps THT_EN bit >> device_attach: acpi_throttle0 attach returned 6 >> powernow0: <PowerNow! K8> on cpu0 >> cpu1: <ACPI CPU> on acpi0 >> powernow1: <PowerNow! K8> on cpu1 >> pmtimer0 on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=3D0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =20 >> isa0 >> Timecounters tick every 1.000 msec >> ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based =20 >> forwarding disabled, default to accept, logging disabled >> The GEOM class LABEL is already loaded. >> usbus0: 12Mbps Full Speed USB v1.0 >> usbus1: 12Mbps Full Speed USB v1.0 >> usbus2: 12Mbps Full Speed USB v1.0 >> usbus3: 12Mbps Full Speed USB v1.0 >> usbus4: 12Mbps Full Speed USB v1.0 >> usbus5: 480Mbps High Speed USB v2.0 >> acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SA00> at ata0-master UDMA66 >> ad4: 152627MB <SAMSUNG HD161HJ GF100-07> at ata2-master SATA300 >> ugen0.1: <ATI> at usbus0 >> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> ugen1.1: <ATI> at usbus1 >> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> ugen2.1: <ATI> at usbus2 >> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >> ugen3.1: <ATI> at usbus3 >> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >> ugen4.1: <ATI> at usbus4 >> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >> ugen5.1: <ATI> at usbus5 >> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 >> GEOM: ad4: geometry does not match label (255h,63s !=3D 16h,63s). >> ad6: 152627MB <Maxtor 6V160E0 VA111900> at ata3-master SATA300 >> hdac0: HDA Codec #3: Realtek ALC662 >> pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 3 nid 1 on hdac0 >> pcm1: <HDA Realtek ALC662 PCM #1 Digital> at cad 3 nid 1 on hdac0 >> SMP: AP CPU #1 Launched! >> GEOM: ad6s1: geometry does not match label (255h,63s !=3D 16h,63s). >> Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub2: 2 ports with 2 removable, self powered >> uhub3: 2 ports with 2 removable, self powered >> uhub4: 2 ports with 2 removable, self powered >> Root mount waiting for: usbus5 >> Root mount waiting for: usbus5 >> Root mount waiting for: usbus5 >> Root mount waiting for: usbus5 >> uhub5: 10 ports with 10 removable, self powered >> Root mount waiting for: usbus5 >> Trying to mount root from ufs:/dev/ufs/ROOT >> ugen0.2: <FTDI> at usbus0 >> ugen0.3: <vendor 0x1267> at usbus0 >> ums0: <vendor 0x1267 PS/2+USB Mouse, class 0/0, rev 1.10/22.70, addr 3= > =20 >> on usbus0 >> ums0: 3 buttons and [XYZ] coordinates ID=3D0 > >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to =20 >> "freebsd-stable-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.u8wrcqh18527sy>