Date: Fri, 15 Jun 2012 16:53:32 +0200 From: "Ronald Klop" <ronald-freebsd8@klop.yi.org> To: freebsd-stable@freebsd.org Subject: Re: devd problem with 9-stable Message-ID: <op.wfx8zifw8527sy@ronaldradial.versatec.local> In-Reply-To: <alpine.BSF.2.00.1206150746510.25418@wonkity.com> References: <CAN6yY1vOHDJzbScVFmgMdnL4JZGb2HUvh=DnL0GNdiH0OUpZ8w@mail.gmail.com> <op.wfv09jqu8527sy@ronaldradial.versatec.local> <CAN6yY1sGp47FZnkX0UuCzH__XXPwO3GVzywT%2B00_SNSg2g-Ywg@mail.gmail.com> <op.wfxpy80b8527sy@ronaldradial.versatec.local> <alpine.BSF.2.00.1206150746510.25418@wonkity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 15 Jun 2012 15:50:49 +0200, Warren Block <wblock@wonkity.com>
wrote:
> On Fri, 15 Jun 2012, Ronald Klop wrote:
>
>> On Fri, 15 Jun 2012 08:01:21 +0200, Kevin Oberman <kob6558@gmail.com>
>> wrote:
>>
>>> On Thu, Jun 14, 2012 at 3:11 AM, Ronald Klop
>>> <ronald-freebsd8@klop.yi.org> wrote:
>>>> On Thu, 14 Jun 2012 02:41:58 +0200, Kevin Oberman <kob6558@gmail.com>
>>>> wrote:
>>>>
>>>>> Since updating my systems to 9-Stable, I am not getting my smartcard
>>>>> reader attached when hot-plugged.
>>>>>
>>>>>> From devd.conf
>>>>> attach 50 {
>>>>> device-name "ugen[0-9]+";
>>>>> match "vendor" "0x0529";
>>>>> match "product" "0x0600";
>>>>> action "/usr/local/sbin/openct-control attach usb:529/600 usb
>>>>> /dev/$dev$
>>>>> };
>>>>> detach 50 {
>>>>> device-name "ugen[0-9]+";
>>>>> match "vendor" "0x0529";
>>>>> match "product" "0x0600";
>>>>> action "/usr/bin/pkill -fx '/usr/local/sbin/ifdhandler -H -p
>>>>> [a-z0-9]+ $
>>>>> };
>>>>> If I manually enter the "action" command, it works fine, but it
>>>>> fails
>>>>> when I insert the device. It worked fine under version 8. I have
>>>>> confirmed devd is seeing the device inserted just fine. the action
>>>>> just does not seem to be carried out.
>>>>> Any idea where I should look? I saw a couple of threads on current
>>>>> from others seeing something similar, but could find no resolution.
>>>>> I have seen a
>>>> Did you run devd with debug messages on? Options -D and -d are
>>>> helpful.
>>>> If you do does devd match the right devd.conf sections and start the
>>>> action?
>>> With debug i get:
>>> Processing event '!system=USB subsystem=DEVICE type=ATTACH
>>> ugen=ugen1.3 cdev=ugen1.3 vendor=0x0529 product=0x0600 devclass=0xff
>>> devsubclass=0x00 sernum="" release=0x0100 mode=host port=1
>>> parent=ugen1.2'
>>> [long list of "Testing" entries, none of which 'vendor' matched]
>>> Executing 'logger Unknown USB device: vendor 0x0529 product 0x0600 bus
>>> uhub3'
>>> So it looks like devd is not matching the vendor. But my devd.conf
>>> file contains that vendor. I don't know exactly why it is not being
>>> tested against. Nothing in the debug output gives me a clue and I
>>> tried grepping for one of the tested vendor IDs in /etc/devd.conf and
>>> /etc/devd/*.conf. Not found.
>>> I am at a loss.
>>
>> http://www.freebsd.org/releases/9.0R/errata.html
>> See point 3 under Open Issues.
>
> Even with those changes, devd is not triggering on my scanner attach:
>
> match "subsystem" "DEVICE";
> match "type" "ATTACH";
> match "cdev" "ugen[0-9]+.[0-9]+";
> match "vendor" "0x04b8";
> match "product" "0x010a";
> action "echo HERE! $cdev > /tmp/zoot";
>
> # devd -d -D -f /etc/devd/wb.conf
>
> Processing event '!system=USB subsystem=DEVICE type=ATTACH ugen=ugen0.6
> cdev=ugen0.6 vendor=0x04b8 product=0x010a devclass=0xff devsubclass=0xff
> sernum="" release=0x0103 mode=host port=4 parent=ugen0.4'
> Pushing table
> setting system=USB
> setting subsystem=DEVICE
> setting type=ATTACH
> setting ugen=ugen0.6
> setting cdev=ugen0.6
> setting vendor=0x04b8
> setting product=0x010a
> setting devclass=0xff
> setting devsubclass=0xff
> setting sernum=
> setting release=0x0103
> setting mode=host
> setting port=4
> setting parent=ugen0.4
> Processing notify event
> Testing system=USB against ^DEVFS
> Testing system=USB against ^DEVFS
> Popping table
>
I tried the same attaching my webcam on pcbsd in vmware.
[root@pcbsd-1684 /etc/devd]# cat /tmp/bla.conf
notify 100 {
match "subsystem" "DEVICE";
match "type" "ATTACH";
match "cdev" "ugen[0-9]+.[0-9]+";
match "vendor" "0x2232";
match "product" "0x1008";
action "echo HERE! $cdev >> /tmp/bla.log";
};
# devd -d -D -f /tmp/bla.conf
...
Processing event '!system=USB subsystem=DEVICE type=ATTACH ugen=ugen1.2
cdev=ugen1.2 vendor=0x2232 product=0x1008 devclass=0xef devsubclass=0x02
sernum="" release=0x0019 mode=host port=1 parent=ugen1.1'
Pushing table
setting system=USB
setting subsystem=DEVICE
setting type=ATTACH
setting ugen=ugen1.2
setting cdev=ugen1.2
setting vendor=0x2232
setting product=0x1008
setting devclass=0xef
setting devsubclass=0x02
setting sernum=
setting release=0x0019
setting mode=host
setting port=1
setting parent=ugen1.1
Processing notify event
Testing subsystem=DEVICE against ^DEVICE
Testing type=ATTACH against ^ATTACH
Testing cdev=ugen1.2 against ^ugen[0-9]+.[0-9]+
Testing vendor=0x2232 against ^0x2232
Testing product=0x1008 against ^0x1008
Executing 'echo HERE! ugen1.2 >> /tmp/bla.log'
Popping table
[root@pcbsd-1684 /etc/devd]# cat /tmp/bla.log
HERE! ugen1.2
Do you see a significant difference with your setup?
Ronald.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.wfx8zifw8527sy>