Date: Mon, 18 Jul 2005 02:19:36 -0400 From: Garance A Drosihn <drosih@rpi.edu> To: freebsd-current@FreeBSD.org Subject: Failure in installworld with new 6.x-branch Message-ID: <p0623094cbf00f5c1df49@[128.113.24.47]>
next in thread | raw e-mail | index | archive | help
I have a power-PC system which has been following HEAD, where it has been running HEAD for awhile. Now that an official 6.0-branch has been created, I moved aside /usr/src and checked out a new src with -r RELENG_6. I copied over a few minor changes (like the same kernel config I had been using), and started a rebuild. buildworld, buildkernel, and installkernel went fine. After I rebooted into single-user mode, the installworld failed early, at: -------------------------------------------------------------- >>> Installing everything -------------------------------------------------------------- cd /usr/src; /usr/bin/make -f Makefile.inc1 install ===> share/info (install) ===> include (install) creating osreldate.h from newvers.sh touch: not found *** Error code 127 The quick-fix that I did was to add 'touch' to the rule in /usr/src/Makefile.inc1 which does: distributeworld installworld: installcheck mkdir -p ${INSTALLTMP} for prog in [ awk cap_mkdb cat chflags chmod chown \ date echo egrep find grep install-info \ ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \ test true uname wc zic; do \ cp `which $$prog` ${INSTALLTMP}; \ done The installworld worked after that. The 'touch' that installworld tripped over seems to be the one in /usr/src/sys/conf/newvers.sh I was upgrading two machines in the same fashion (switching from HEAD to RELENG_6) at about the same time. The i386 machine did not get this error, but the ppc machine did. It is possible that I forgot to do the 'make cleanworld' on the ppc machine. Everything seems to be working okay on both machines, once I got past the installworld issue and rebooted. -- Garance Alistair Drosehn = gad@gilead.netel.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?p0623094cbf00f5c1df49>