Date: Thu, 17 Dec 1998 11:54:32 -0500 From: Andrew Nisbet <NisbetA@spar.ca> To: freebsd-questions@FreeBSD.ORG Subject: install question (3MIN) Message-ID: <s678d4f1.039@SPAR.CA>
next in thread | raw e-mail | index | archive | help
I am trying to install FreeBSD2.4 on a DEC5000/120 station without much success. I am using the simpleroot24 copied to rz0 using dd. After rebooting the machine initializes with this message...
KN02-BA V5.7C (PC:0x800314e4, SP: 0xffffeef8)
Boot: 3/rz0/bsd
Size: 1210432+0+84768
Starting at 0x80030000
Copyright (c)1982, 1986, 1989, 1991, 1993
The Regents of the Unibersity of California. All rights reserved.
Copyright (c)1995-1998 OpenBSD. All rights reserved. http://www.OpenBSD.org
vm_mem_init: WARN: MD code did not set page size
OpenBSD 2.4 (GENERIC) #0: Sat Oct 24 20:21:00 MEST 1998
realmem = 33554432
avail mem = 29208576
using 435 buffers containing 1781760 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000 CPU Rev. 3.0 with MIPS R3010 FPC Rev. 3.0
tc0 at mainbus0:12.5 MHz clock
asic0 at tc0 slot 3 offset 0x0
le0 at asic0 offset 0xc0000 priority4: address 08:00:2b:1c:1c:a9
le0: 32 receive buffers, 8 transmit buffers
scc0 at asic0 offset 0x1000000 priority 6
scc1 at asic0 offset 0x1800000 priority 5
clock0 at asic0 offset 0x200000 priority 0
asc0 at asic0 offset 0x300000 priority 3: target 7
cfb0 at tc0 slot 0 offset 0x0 (1024x864x8) (console)tc_enable mainbus0 sc c04027
00 slot 0x0
Enabling 3MIN tcslot 0 (UNTESTED)
Beginning old-style SCSI device autoconfiguration
rz0 at asc0 drive 0 lun FUJITSU M2684S-512 rev 2035
rz0: 507MB, 2380 cyl, 6 head, 72 sec, 512 bytes/sec, 1030329 sec total
rz4 at asc0 drive 4 lun 0 DEC RRD42 (C) DEC rev 1.4a
root device? <rz0a>
WARNING: clock lost 10523 days -- CHECK AND RESET THE DATE!
exec /sbin/init:error 20
exec /sbin/oinit:error 20
exec /sbin/init.bak:error 20
init: not found
panic: not init
syncing disks... done
dumping to dev 1501, offset 65536
dump succeeded
rebooting...
___________________________________
Anyway I hope that I didn't do something lame and if you have any additional advice I'd love to hear from you
Andrew Nisbet (nisbeta@spar.ca) (nisbeta@connect.ab.ca)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?s678d4f1.039>