Date: Thu, 30 Sep 1999 00:42:55 +1000 From: jesse reynolds <jesse@va.com.au> To: freebsd-hardware@freebsd.org Subject: Fujitsu Laptop boot problems (Lifebook 735Dx) Message-ID: <v04205500b417c8bac8a3@[1.1.1.3]> In-Reply-To: <Pine.BSF.4.10.9908272003210.1358-100000@sasami.jurai.net> References: <Pine.BSF.4.10.9908272003210.1358-100000@sasami.jurai.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi folx I'm trying to install FreeBSD 3.3 RELEASE on a Fujitsu Lifebook, 133MHz (MMX Pentium) laptop. If I choose "Continue without kernel configuration" it gets a screen or two's way through the driver inits, then it hits "wdc1" and pauses for about 10 seconds or so, then a few lines flash up, then a quick flash of a screen full of garbage, leaving the following: ... zp0 not found at 0x300 adv0 not found at 0x330 bt0 not found at 0x134 aha0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Fatal trap 12: page fault while in kernel mode fault virtual address = 0x4d4d4d4d fault code = supervisor read, page not present instruction pointer = 0x8:0xc02501f0 stack pointer = 0x10:0xc062bf6c frame pointer = 0x10:0xc062bf74 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 () interrupt mask = net tty bio cam trap number = 12 panic: page fault Automatic reboot in 15 seconds - press a key on the console to abort ... Is any of this useful? If so, what bits? How do you go about tracking down which piece of hardware is causing grief? This laptop has lots of bits on it, like USB, sound, power management chips, blah blah blah. cheers jesse -- Jesse Reynolds - Virtual Artists Pty Ltd - http://www.va.com.au - http://virtual.artists Mobile: (+61) 0414 669 790 Faxmail: (+61) 02 9776 3594 Virtual Community Engine Email: jesse (at) va.com.au http://www.vce.net ?: http://jesse.va.com.au huh?: Content Management System ICQ: 4766684 & Application Server for Timezone: GMT +10:00 Hrs MacOS Webservers (W*API) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?v04205500b417c8bac8a3>