Date: Wed, 30 Apr 2003 12:36:13 +0900 From: Hajimu UMEMOTO <ume@mahoroba.org> To: Wolfgang Kess <bsdlist@kess.ch> Cc: freebsd-mobile@freebsd.org Subject: Re: JVC MP-XP7250 mini laptop Message-ID: <yger87kr70y.wl%ume@mahoroba.org> In-Reply-To: <20030429194517.GA17641@stinky.trash.net> References: <20030429151005.GA16318@stinky.trash.net> <yger87luy0d.wl%ume@mahoroba.org> <20030429194517.GA17641@stinky.trash.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, >>>>> On Tue, 29 Apr 2003 21:45:17 +0200 >>>>> Wolfgang Kess <bsdlist@kess.ch> said: bsdlist> It's a 7230 with integrated IEEE 802.11b http://www.jvc.de/eu/mpxp/xp.html I see. > bsdlist> I found a page about the XP7210 and Linux http://emdete.de/mp-xp/index.html > > I'm using 7210 with 5-CURRENT. It's fine to me. bsdlist> That's very good. bsdlist> PC-Card Slot, FireWire, build-in Ethernet, USB and Sound are supported? USB is usable unless you do suspend/resume. Sound is working on my 7210. However, sometimes noise is mixed. A friend of mine claims that his sound doesn't work at all on his 7210. Though ATA should be available with UDMA100, it recognized only UDMA33, now. I could use it with UDMA100 until begining of this year. But, the changes on ata seems broke. FireWire is recognized. But, I don't have any FireWire device. PC-Card and build-in Ethernet is working fine. bsdlist> Please could you send me the dmesg output? Okay. Here is: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sun Apr 27 21:45:01 JST 2003 root@lyrics.mahoroba.org:/ad0s3/usr/obj/usr/src/sys/LYRICS Preloaded elf kernel "/boot/kernel/kernel" at 0xc0576000. Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc05760a8. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0576154. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc0576200. Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc05762ac. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc057635c. Preloaded elf module "/boot/kernel/usb.ko" at 0xc0576408. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc05764b0. Preloaded elf module "/boot/kernel/umass.ko" at 0xc057655c. Preloaded elf module "/boot/kernel/cam.ko" at 0xc0576608. Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc05766b0. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc057675c. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc0576808. Preloaded elf module "/boot/kernel/aout.ko" at 0xc05768b8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0576964. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 797463033 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 800MHz (797.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 385855488 (367 MB) avail memory = 368803840 (351 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <J1 J1 > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00f1530 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 atapci0: <SiS 630S UDMA100 controller> port 0xd800-0xd80f at device 0.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xd3800000-0xd3800fff irq 5 at device 1.1 on pci0 sis0: Ethernet address: 00:80:88:03:48:41 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ohci0: <SiS 5571 USB controller> mem 0xd3000000-0xd3000fff irq 4 at device 1.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xd2800000-0xd2800fff irq 4 at device 1.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pcm0: <SiS 7018> port 0xd000-0xd0ff mem 0xd2000000-0xd2000fff irq 7 at device 1.4 on pci0 pcm0: <Analog Devices AD1881A AC97 Codec> pci0: <simple comms> at device 1.6 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xde000-0xdefff irq 11 at device 9.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 9.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <base peripheral> at device 9.2 (no driver attached) fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xd0800000-0xd0803fff,0xd1000000-0xd10007ff irq 4 at device 10.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:03:03:2a:66 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> flags 0x6000 irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IPsec: Initialized Security Association Processing. fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s4a ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled IPv6 packet filtering initialized, logging disabled -- Hajimu UMEMOTO @ Internet Mutual Aid Society Yokohama, Japan ume@mahoroba.org ume@bisd.hitachi.co.jp ume@{,jp.}FreeBSD.org http://www.imasy.org/~ume/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?yger87kr70y.wl%ume>