Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 17 Nov 2005 11:54:26 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        Andrew Bliznak <andriko.b@gmail.com>
Cc:        freebsd-multimedia@freebsd.org
Subject:   Re: CURRENT Intel ICH5 (82801EB) errors
Message-ID:  <20051117025426.GC8586@rndsoft.co.kr>
In-Reply-To: <21be38170511160253w1919fa1w71bad77f52cec2b0@mail.gmail.com>
References:  <21be38170511160253w1919fa1w71bad77f52cec2b0@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help

--wac7ysb48OaltWcw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Wed, Nov 16, 2005 at 01:53:25PM +0300, Andrew Bliznak wrote:
 > Just for information
 > 
 > FreeBSD beef.xxxxxx.com 7.0-CURRENT FreeBSD 7.0-CURRENT #0: Tue Nov 15
 > 13:03:12 EET 2005    
 > andrew@pyvo.xxxxxx.com:/usr/home/andrew/C/obj/usr/home/andrew/C/src/sys/GENERIC
 >  i386
 > 
 > from dmesg:
 > ---
 > Nov 15 17:02:31 beef kernel: pcm0: <Intel ICH5 (82801EB)> port
 > 0xd000-0xd0ff,0xe100-0xe13f mem
 > 0xf8201000-0xf82011ff,0xf8202000-0xf82020ff irq 17 at device 31.5 on
 > pci0
 > Nov 15 17:02:31 beef kernel: pcm0: unable to initialize the card
 > Nov 15 17:02:31 beef kernel: device_attach: pcm0 attach returned 6

How about attached patch?

PS. Don't blame me if the patch does not work for you. I don't have
    these hardwares.
-- 
Regards,
Pyun YongHyeon

--wac7ysb48OaltWcw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="ich.patch2"

--- sys/dev/sound/pci/ich.c.orig	Wed Nov 16 09:50:55 2005
+++ sys/dev/sound/pci/ich.c	Thu Nov 17 11:51:12 2005
@@ -684,6 +684,7 @@
 		    sc->devid == INTEL_82801DB || sc->devid == INTEL_82801EB ||
 		    sc->devid == INTEL_6300ESB || sc->devid == INTEL_82801FB ||
 		    sc->devid == INTEL_82801GB)) {
+			device_printf(sc->dev, "primary codec not ready!");
 			return ENXIO;
 		}
 	}
@@ -759,28 +760,25 @@
 	}
 
 	/*
+	 * Enable bus master. On ich4/5 this may prevent the detection of
+	 * the primary codec becoming ready in ich_init().
+	 */
+	pci_enable_busmaster(dev);
+
+	/*
 	 * By default, ich4 has NAMBAR and NABMBAR i/o spaces as
 	 * read-only.  Need to enable "legacy support", by poking into
 	 * pci config space.  The driver should use MMBAR and MBBAR,
 	 * but doing so will mess things up here.  ich4 has enough new
 	 * features it warrants it's own driver. 
 	 */
-	if (vendor == INTEL_VENDORID && devid == INTEL_82801DB) {
-		pci_write_config(dev, PCIR_ICH_LEGACY, ICH_LEGACY_ENABLE, 1);
-	}
-
-	/*
-	 * Enable bus master. On ich4/5 this may prevent the detection of
-	 * the primary codec becoming ready in ich_init().
-	 */
-	pci_enable_busmaster(dev);
-
-	if (vendor == INTEL_VENDORID && (devid == INTEL_82801EB ||
-	    devid == INTEL_6300ESB || devid == INTEL_82801FB ||
-	    devid == INTEL_82801GB)) {
+	if (vendor == INTEL_VENDORID && (devid == INTEL_82801DB ||
+	    devid == INTEL_82801EB || devid == INTEL_6300ESB ||
+	    devid == INTEL_82801FB || devid == INTEL_82801GB)) {
 		sc->nambarid = PCIR_MMBAR;
 		sc->nabmbarid = PCIR_MBBAR;
 		sc->regtype = SYS_RES_MEMORY;
+		pci_write_config(dev, PCIR_ICH_LEGACY, ICH_LEGACY_ENABLE, 1);
 	} else {
 		sc->nambarid = PCIR_NAMBAR;
 		sc->nabmbarid = PCIR_NABMBAR;

--wac7ysb48OaltWcw--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051117025426.GC8586>