Date: Wed, 7 Oct 1998 11:57:33 -0400 From: "John Johnson" <icjohnson@mindspring.com> To: <questions@FreeBSD.ORG> Subject: Configuring XFree86 Message-ID: <000001bdf20b$33224d50$1a4efe26@jjohnson.alliedcapital.com>
next in thread | raw e-mail | index | archive | help
I've asked this question previously, so please bear with me as I've still not found an answer, but I'm trying to configure Xfree86 to display a resolution greater than 320x200. I've installed FreeBSD on a Dell Inspiron 3200 with a NeoMagic MagicGraph 128XD video adapter. Copied below is the complete output of "startx > startx.out 2>&1". FWIW, I have checked the FAQs and freebsd.org. Thanks, John --- XFree86 Version 3.3.2.3 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: July 15 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 2.2.5-STABLE i386 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge, s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200, ct64300, generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: disabled (**) XKB: keymap: "xfree86(us)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/sysmouse, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (**) SVGA: Graphics device ID: "NeoMagic" (**) SVGA: Monitor ID: "Generic Multisync" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/us r/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/ X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X 11/fonts/100dpi/" (--) SVGA: PCI: Unknown vendor (0x10c8) Unknown chipset (0x0004) rev 1, Memory @ 0xfd000000, 0xfea00000 (--) SVGA: chipset: generic (**) SVGA: videoram: 2048k (--) SVGA: clocks: 25.18 (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Using builtin driver modes (--) SVGA: Builtin Mode: 320x200 (--) SVGA: Virtual resolution set to 320x204 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 X connection to :0.0 broken (explicit kill or server shutdown). X connection to :0.0 broken (explicit kill or server shutdown). xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" login: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0" xinit: connection to X server lost. waiting for X server to shut down FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001bdf20b$33224d50$1a4efe26>