Date: Tue, 20 Mar 2001 15:03:33 -0800 From: "Josh Benton" <josh@corp.wac.com> To: <support@paymentonline.com>, <questions@FreeBSD.ORG> Subject: RE: make kernel fails Message-ID: <000901c0b191$fd4e8650$0c2697ce@CJ7> In-Reply-To: <001d01c0b18e$f3122960$5ac9650a@ecom.paymentonline.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Did you do a "make depend" in the compile/GUARDIAN directory? -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Payment Online Technical Support Sent: Tuesday, March 20, 2001 2:42 PM To: questions@FreeBSD.ORG Subject: make kernel fails Hi, My attempt to make a new kernel stopped, dunno why - everything in the config file looked okay. Please tell me what I did wrong? Thanks in advance! -- My machine specs are: intel 486 no SCSI devices no USB no PCMCIA no PCI 1 IDE hard drive, 1 floppy drive 3c509 ISA network card (it's a simple little box, running FreeBSD 4.3 beta 2 installed via FTP) -- here's the output from my attempted make (it dies pretty quickly): guardian# /usr/sbin/config -g GUARDIAN Don't forget to do a ``make depend'' Kernel build directory is ../../compile/GUARDIAN guardian# cd ../../compile/GUARDIAN guardian# make perl5 ../../kern/vnode_if.pl -h ../../kern/vnode_if.src perl5 ../../kern/makeops.pl -h ../../kern/device_if.m perl5 ../../kern/makeops.pl -h ../../kern/bus_if.m perl5 ../../kern/makeops.pl -h ../../dev/mii/miibus_if.m perl5 ../../kern/makeops.pl -h ../../dev/ppbus/ppbus_if.m perl5 ../../kern/makeops.pl -h ../../isa/isa_if.m cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../i386/i386/genassym.c sh ../../kern/genassym.sh genassym.o > assym.s cc -c -x assembler-with-cpp -DLOCORE -O -Wall -Wredundant-decls -Wnested-externs -Wst rict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KE RNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../i386/i386/locore.s perl5 ../../kern/makeops.pl -c ../../kern/device_if.m cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 device_if.c perl5 ../../kern/makeops.pl -c ../../kern/bus_if.m cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 bus_if.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/ep/if_ep.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/ep/if_ep_isa.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/md/md.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/mii.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/mii_physubr.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/ukphy.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/ukphy_subr.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/amphy.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/brgphy.c cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmis sing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -a nsi -g -nostdinc -I- -I. -I../.. -I/usr/include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../dev/mii/dcphy.c In file included from ../../dev/mii/dcphy.c:67: ../../pci/pcivar.h:171: pci_if.h: No such file or directory *** Error code 1 Stop in /usr/src/sys/compile/GUARDIAN. guardian# -- and here's the kernel configuration named GUARDIAN (copied from GENERIC): # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GUARDIAN,v 1.246.2.23 2001/03/07 08:08:42 imp Exp $ machine i386 #cpu I386_CPU cpu I486_CPU #cpu I586_CPU #cpu I686_CPU ident GUARDIAN maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support #options SYSVSHM #SYSV-style shared memory #options SYSVMSG #SYSV-style message queues #options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa #device eisa #device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives #device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # # Allow ncr to attach legacy NCR devices when # # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device mly # Mylex AcceleRAID/eXtremeRAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver device vt0 at isa? #options XSERVER # support for X server on a vt console options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device pcn # AMD Am79C79x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ex device ep #device fe0 at isa? port 0x300 # Xircom Ethernet #device xe # PRISM I IEEE 802.11b wireless NIC. #device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 #device sn0 at isa? port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet Thanks again! Best regards, Gary ________________________________________________________________________ Gary Long, Technical Support, Payment Online Ph:(206)829-1793 Fax:(206)382-1616 601 Union St #1633 Seattle, WA 98101 http://www.paymentonline.com Everything you need in order to sell online ________________________________________________________________________ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000901c0b191$fd4e8650$0c2697ce>