Date: Tue, 10 Nov 2015 21:04:52 -0500 From: "Curtis Hamilton" <hamiltcl@verizon.net> To: "'Adrian Chadd'" <adrian@freebsd.org> Cc: "'FreeBSD PowerPC ML'" <freebsd-ppc@freebsd.org> Subject: RE: Airport Extreme WiFi Broken in FreeBSD 10.2 Message-ID: <00aa01d11c25$5b095140$111bf3c0$@verizon.net> In-Reply-To: <CAJ-Vmok30bBeaV1rBidvOsyY7ExOyhuZUh87wsamT0VaBPjwjg@mail.gmail.com> References: <CAJ-Vmom0qAS6EmWgvMQdLotsVyKfmJuVKt9QTg2OJD6WOiVjrw@mail.gmail.com> <008401d11bb3$c4c31430$4e493c90$@verizon.net> <CAJ-Vmok30bBeaV1rBidvOsyY7ExOyhuZUh87wsamT0VaBPjwjg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multipart message in MIME format. ------=_NextPart_000_00AB_01D11BFB.72412BF0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I've checked the log and don't see any warnings. Attached is my current log. What am I missing? Unfortunately, the system does not complete the boot process with the bwi module loaded. so I do not have a log for that process. BTW, I've tried manually loading the module after booting, both without and with the airport firmware. Without the airport firmware the system complains but continues to run, however with the firmware the system locks up. -Curtis -----Original Message----- From: adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] On Behalf Of Adrian Chadd Sent: Tuesday, November 10, 2015 3:54 PM To: Curtis Hamilton <hamiltcl@verizon.net> Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: Airport Extreme WiFi Broken in FreeBSD 10.2 It's not initialising fine; it's actually logging a warning. :) -a On 10 November 2015 at 04:31, Curtis Hamilton <hamiltcl@verizon.net> wrote: > I'll investigate. My initial presumption that it was a bwi module > issue is because ata2 initializes just fine without the bwi module. > > -----Original Message----- > From: adrian.chadd@gmail.com [mailto:adrian.chadd@gmail.com] On Behalf > Of Adrian Chadd > Sent: Monday, November 09, 2015 4:44 PM > To: Curtis Hamilton <hamiltcl@verizon.net> > Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> > Subject: Re: Airport Extreme WiFi Broken in FreeBSD 10.2 > > Hi, > > It looks like there's something up with the memory management, not wifi. > ata2 failing and bwi failing in DMA memory allocation is the hint. :) > > > > -a > > > On 9 November 2015 at 12:00, Curtis Hamilton <hamiltcl@verizon.net> wrote: >> Has anyone else tried to load the BWI module in 10.2? I attempted to >> load the kernel module and build a new kernel with the module >> built-in. In both cases the boot process freezes with the following > errors: >> >> >> >> ata2: <ATA channel > at channel0 on atapci0 >> >> ata2: WARNING DMA initialization failed, disabling DMA >> >> ata2: FAILURE - alloc sg_map >> >> ata2: WARNING DMA allocation failed, disabling DMA >> >> >> >> A few lines before this the following error is shown: >> >> >> >> bwi0: can't allocate DMA mem >> >> bwi0: 0th TX ring DMA alloc-failed >> >> >> >> Everything works fine in 10.1 >> >> _______________________________________________ >> freebsd-ppc@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-ppc >> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org" > ------=_NextPart_000_00AB_01D11BFB.72412BF0 Content-Type: application/octet-stream; name="dmesg.today" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.today" Copyright (c) 1992-2015 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD is a registered trademark of The FreeBSD Foundation.=0A= FreeBSD 10.2-STABLE #0 r287149: Thu Aug 27 03:46:55 UTC 2015=0A= = root@releng1.nyi.freebsd.org:/usr/obj/powerpc.powerpc64/usr/src/sys/GENER= IC64 powerpc=0A= gcc version 4.2.1 20070831 patched [FreeBSD]=0A= VT(ofwfb): resolution 1680x1050=0A= cpu0: IBM PowerPC 970MP revision 1.1, 2300.29 MHz=0A= cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU>=0A= cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN>=0A= real memory =3D 5878026240 (5605 MB)=0A= avail memory =3D 5531877376 (5275 MB)=0A= FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=0A= cpu0: dev=3Dff89d680 (BSP)=0A= cpu1: dev=3Dff89eb70=0A= kbd0 at kbdmux0=0A= random: <Software, Yarrow> initialized=0A= ofwbus0: <Open Firmware Device Tree> on nexus0=0A= cpulist0: <Open Firmware CPU Group> on ofwbus0=0A= cpu0: <Open Firmware CPU> on cpulist0=0A= pcr0: <PPC 970 Power Control Register> on cpu0=0A= cpu1: <Open Firmware CPU> on cpulist0=0A= pcr1: <PPC 970 Power Control Register> on cpu1=0A= powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0=0A= powermac_nvram0: bank0 generation 550, bank1 generation 551=0A= unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on = ofwbus0=0A= unin0: Version 66=0A= iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0=0A= iicbus0: <OFW I2C bus> on iichb0=0A= ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0=0A= ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0=0A= max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0=0A= max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0=0A= htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0=0A= pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0=0A= pci0: <OFW PCI bus> on pcib0=0A= vgapci0: <VGA-compatible display> mem = 0x92000000-0x92ffffff,0xa0000000-0xbfffffff,0x91000000-0x91ffffff irq 3 = at device 0.0 on pci0=0A= vgapci0: Boot video device=0A= pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem = 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0=0A= pcib1: 86 HT IRQs on device 7.0=0A= pci1: <OFW PCI bus> on pcib1=0A= pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0=0A= pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1=0A= pci2: <OFW PCI bus> on pcib2=0A= pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1=0A= pci3: <OFW PCI bus> on pcib3=0A= bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem = 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3=0A= bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz=0A= miibus0: <MII bus> on bge0=0A= brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0=0A= brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow=0A= bge0: Ethernet address: 00:16:cb:3a:88:88=0A= bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem = 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3=0A= bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz=0A= miibus1: <MII bus> on bge1=0A= brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1=0A= brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, = 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow=0A= bge1: Ethernet address: 00:16:cb:3a:88:89=0A= pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1=0A= pci4: <OFW PCI bus> on pcib4=0A= pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1=0A= pci5: <OFW PCI bus> on pcib5=0A= pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1=0A= pci6: <OFW PCI bus> on pcib6=0A= pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1=0A= pci7: <OFW PCI bus> on pcib7=0A= pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1=0A= pci8: <OFW PCI bus> on pcib8=0A= gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device = 15.0 on pci8=0A= gem0: invalid MAC address=0A= device_attach: gem0 attach returned 6=0A= pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1=0A= pci9: <OFW PCI bus> on pcib9=0A= macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 = on pci9=0A= macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0=0A= scc0: <Zilog Z8530 dual channel SCC> mem = 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff = irq 23,17,18,24,19,20 on macio0=0A= uart0: <z8530, channel A> on scc0=0A= uart1: <z8530, channel B> on scc0=0A= iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0=0A= iicbus1: <OFW I2C bus> on iichb1=0A= onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1=0A= iicbus1: <unknown card> at addr 0x24=0A= pcm0: <Apple I2S Audio Controller> mem = 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on = macio0=0A= pci9: <network> at device 1.0 (no driver attached)=0A= ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at = device 11.0 on pci9=0A= usbus0 on ohci0=0A= ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at = device 11.1 on pci9=0A= usbus1 on ohci1=0A= ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x80080000-0x800800ff irq = 70 at device 11.2 on pci9=0A= usbus2: EHCI version 1.0=0A= usbus2 on ehci0=0A= pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1=0A= pci10: <OFW PCI bus> on pcib10=0A= atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff = irq 10 at device 12.0 on pci10=0A= pcib1: failed to reserve resource for pcib10=0A= atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).=0A= ata2: <ATA channel> at channel 0 on atapci0=0A= ata3: <ATA channel> at channel 1 on atapci0=0A= ata4: <ATA channel> at channel 2 on atapci0=0A= ata5: <ATA channel> at channel 3 on atapci0=0A= ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 = at device 13.0 on pci10=0A= fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff = irq 39 at device 14.0 on pci10=0A= fwohci0: OHCI version 1.0 (ROM=3D0)=0A= fwohci0: No. of Isochronous channels is 8.=0A= fwohci0: EUI64 00:14:51:ff:fe:41:47:5a=0A= fwohci0: invalid speed 7 (fixed to 3).=0A= fwohci0: Phy 1394a available S800, 3 ports.=0A= fwohci0: Link S800, max_rec 4096 bytes.=0A= firewire0: <IEEE1394(FireWire) bus> on fwohci0=0A= fwe0: <Ethernet over FireWire> on firewire0=0A= if_fwe0: Fake Ethernet address: 02:14:51:41:47:5a=0A= fwe0: Ethernet address: 02:14:51:41:47:5a=0A= sbp0: <SBP-2/SCSI over FireWire> on firewire0=0A= fwohci0: Initiate bus reset=0A= fwohci0: fwohci_intr_core: BUS reset=0A= fwohci0: fwohci_intr_core: node_id=3D0x00000002, SelfID Count=3D1, = CYCLEMASTER mode=0A= smu0: <Apple System Management Unit> on ofwbus0=0A= iichb2: <SMU I2C controller> on smu0=0A= iicbus2: <OFW I2C bus> on iichb2=0A= smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2=0A= iicbus2: <unknown card> at addr 0xd4=0A= iichb3: <SMU I2C controller> on smu0=0A= iicbus3: <OFW I2C bus> on iichb3=0A= Timecounter "timebase" frequency 33333333 Hz quality 0=0A= Event timer "decrementer" frequency 33333333 Hz quality 1000=0A= Timecounters tick every 1.000 msec=0A= firewire0: 3 nodes, maxhop <=3D 2 cable IRM irm(2) (me) =0A= firewire0: bus manager 2 =0A= max66900: 2 sensors detected.=0A= max66901: 2 sensors detected.=0A= random: unblocking device.=0A= usbus0: 12Mbps Full Speed USB v1.0=0A= usbus1: 12Mbps Full Speed USB v1.0=0A= ugen0.1: <NEC> at usbus0=0A= uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0=0A= ugen1.1: <NEC> at usbus1=0A= uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1=0A= usbus2: 480Mbps High Speed USB v2.0=0A= ugen2.1: <NEC> at usbus2=0A= uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2=0A= uhub0: 3 ports with 3 removable, self powered=0A= uhub1: 2 ports with 2 removable, self powered=0A= uhub2: 5 ports with 5 removable, self powered=0A= ada0 at ata2 bus 0 scbus0 target 0 lun 0=0A= ada0: <ST31000524AS JC4B> ATA8-ACS SATA 3.x device=0A= ada0: Serial Number 9VP6KXTM=0A= ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)=0A= ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)=0A= ada0: Previously was known as ad0=0A= ada1 at ata3 bus 0 scbus1 target 0 lun 0=0A= ada1: <ST3500630NS Q 3.BTJ> ATA-7 SATA 2.x device=0A= ada1: Serial Number 9QG9QKH4=0A= ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)=0A= ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)=0A= ada1: Previously was known as ad1=0A= cd0 at ata0 bus 0 scbus4 target 0 lun 0=0A= cd0: <HL-DT-ST DVD-RW GWA-4165B Q002> Removable CD-ROM SCSI device=0A= cd0: Serial Number M0064S32313=0A= cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)=0A= cd0: cd present [1100623 x 2048 byte records]=0A= SMP: AP CPU #1 launched=0A= ugen2.2: <Hewlett Packard> at usbus2=0A= umass0: <SCSI Over USB> on usbus2=0A= umass0: SCSI over Bulk-Only; quirks =3D 0x0100=0A= umass0:6:0:-1: Attached to scbus6=0A= sa0 at umass-sim0 bus 0 scbus6 target 0 lun 0=0A= sa0: <HP C7438A ZU8B> Removable Sequential Access SCSI-3 device=0A= sa0: Serial Number 48553108084D3639=0A= sa0: 40.000MB/s transfers=0A= ugen2.3: <vendor 0x05ac> at usbus2=0A= uhub3: <vendor 0x05ac product 0x9130, class 9/0, rev 2.00/1.01, addr 3> = on usbus2=0A= uhub3: MTT enabled=0A= uhub3: 3 ports with 2 removable, self powered=0A= ugen2.4: <Mitsumi Electric> at usbus2=0A= uhub4: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, = rev 1.10/4.00, addr 4> on usbus2=0A= uhub4: 3 ports with 2 removable, bus powered=0A= ugen2.5: <Mitsumi Electric> at usbus2=0A= ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev = 1.10/4.00, addr 5> on usbus2=0A= kbd1 at ukbd0=0A= uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev = 1.10/4.00, addr 5> on usbus2=0A= ugen2.6: <vendor 0x05ac> at usbus2=0A= hid_get_item: Number of items truncated to 255=0A= hid_get_item: Number of items truncated to 255=0A= uhid1: <vendor 0x05ac product 0x9222, class 0/0, rev 1.10/1.14, addr 6> = on usbus2=0A= hid_get_item: Number of items truncated to 255=0A= hid_get_item: Number of items truncated to 255=0A= hid_get_item: Number of items truncated to 255=0A= Root mount waiting for: usbus2=0A= ugen2.7: <Primax Electronics> at usbus2=0A= ums0: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev = 1.10/1.10, addr 7> on usbus2=0A= ums0: 4 buttons and [XYZW] coordinates ID=3D0=0A= Trying to mount root from ufs:/dev/ada0s3 [rw]...=0A= ugen0.2: <vendor 0x05ac> at usbus0=0A= ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> = on usbus0=0A= kbd2 at ukbd1=0A= ums1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> = on usbus0=0A= ums1: 5 buttons and [XY] coordinates ID=3D0=0A= pid 1258 (firefox), uid 0: exited on signal 11 (core dumped)=0A= (sa0:umass-sim0:0:0:0): REWIND. CDB: 01 00 00 00 00 00 =0A= (sa0:umass-sim0:0:0:0): CAM status: CCB request completed with an error=0A= (sa0:umass-sim0:0:0:0): Retrying command=0A= (sa0:umass-sim0:0:0:0): REWIND. CDB: 01 00 00 00 00 00 =0A= (sa0:umass-sim0:0:0:0): CAM status: SCSI Status Error=0A= (sa0:umass-sim0:0:0:0): SCSI status: Check Condition=0A= (sa0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus = reset occurred)=0A= (sa0:umass-sim0:0:0:0): Retrying command (per sense data)=0A= (sa0:umass-sim0:0:0:0): SPACE(6). CDB: 11 00 00 26 46 00 =0A= (sa0:umass-sim0:0:0:0): CAM status: CCB request completed with an error=0A= (sa0:umass-sim0:0:0:0): Error 5, Retries exhausted=0A= pid 95271 (about-gui), uid 0: exited on signal 11 (core dumped)=0A= pid 95299 (pc-usermanager), uid 0: exited on signal 11 (core dumped)=0A= pid 95310 (pc-sysinstaller), uid 0: exited on signal 11 (core dumped)=0A= pid 95303 (pc-sysinstaller), uid 0: exited on signal 11 (core dumped)=0A= pid 95573 (pc-servicemanager), uid 0: exited on signal 11 (core dumped)=0A= pid 6075 (python2.7), uid 0: exited on signal 11 (core dumped)=0A= pid 1503 (firefox), uid 0: exited on signal 6 (core dumped)=0A= ------=_NextPart_000_00AB_01D11BFB.72412BF0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00aa01d11c25$5b095140$111bf3c0$>