Date: Wed, 23 Apr 1997 18:33:16 -0300 From: Lucas Cotta <cotta@pgt.mpt.gov.br> To: "smp@freebsd.org" <smp@freebsd.org> Subject: reults of mptable Message-ID: <01BC5014.D29B6AA0@support.pgt.mpt.gov.br>
next in thread | raw e-mail | index | archive | help
Results of my machine with p166 dual processor , next p200 dual processor ======================================================================== ======= MPTable, version 2.0.6 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f800 (638K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000fdbe0 ------------------------------------------------------------------------ ------- MP Floating Pointer Structure: location: BIOS physical address: 0x000fdbe0 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x4d mode: Virtual Wire ------------------------------------------------------------------------ ------- MP Config Table Header: physical address: 0x0009fd50 signature: 'PCMP' base table length: 252 version: 1.4 checksum: 0x03 OEM ID: 'ALR ' Product ID: '10010 EISA ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 23 local APIC address: 0xfee00000 extended table length: 56 extended table checksum: 193 ------------------------------------------------------------------------ ------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x10 BSP, usable 5 2 12 0x03bf 1 0x10 AP, usable 5 2 12 0x03bf -- Bus: Bus ID Type 0 PCI 1 EISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 1 0 2 0 INT conforms conforms 1 1 2 1 INT conforms conforms 1 0 2 2 INT conforms conforms 1 3 2 3 INT conforms conforms 1 4 2 4 INT conforms conforms 1 5 2 5 INT conforms conforms 1 6 2 6 INT conforms conforms 1 7 2 7 INT conforms conforms 1 8 2 8 INT conforms conforms 1 9 2 9 INT conforms conforms 1 10 2 10 INT conforms conforms 1 11 2 11 INT conforms conforms 1 12 2 12 INT conforms conforms 1 13 2 13 INT conforms conforms 1 14 2 14 INT conforms conforms 1 15 2 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT active-hi edge 1 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------ ------- MP Config Extended Table Entries: -- bus ID: 0 address type: memory address address base: 0x0 address range: 0x0 -- bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- bus ID: 0 address modifier: add predefined range: 0x00000000-- bus ID: 0 address modifier: add predefined range: 0x00000001 ------------------------------------------------------------------------ ------- # SMP kernel config file options: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O options NCPU=2 # number of CPUs options NBUS=2 # number of busses options NAPIC=1 # number of IO APICs options NINTR$ # number of INTs options SMP_INVLTLB # #options SMP_PRIVPAGES # BROKEN, DO NOT use! #options SMP_AUTOSTART # BROKEN, DO NOT use! #options SERIAL_DEBUG # com port debug output ------------------------------------------------------------------------ ------- dmesg output: Copyright (c) 1992-1996 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.1-RELEASE #0: Tue Apr 1 15:30:07 EST 1997 CPU: Pentium (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping_ Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC> real memory = 33554432 (32768K bytes) avail memory = 30031872 (29328K bytes) eisa0: <ALR1a4 (System Board)> Probing for devices on the EISA bus Probing for devices on PCI bus 0: chip0 <Intel 82439> rev 3 on pci0:0 chip1 <Intel 82375EB PCI-EISA bridge> rev 21 on pci0:7:0 pci0:8: vendor=0x10ad, device=0x0105, class=storage (ide) int a irq 14 [no driver assigned] vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:17 vx0 <3COM 3C590 Etherlink III PCI> rev 0 int a irq 11 on pci0:19 utp/aui/bnc[*utp*] address 00:a0:24:78:02:48 ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:20 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0 waiting for scsi devices to settle (ahc0:0:0): "SEAGATE ST32550W 0021" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2047MB (4194058 512 byte sectors) (ahc0:5:0): "PLEXTOR CD-ROM PX-6XCS 2.05" type 5 removable SCSI 2 cd0(ahc0:5:0): CD-ROM can't get the size Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0 not found at 0x360 ep0 not found at 0x300 ex0 not found at 0x300 ix0 not found at 0x300 le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a ======================================================================== ======= Abracos Lucas Cotta - cotta@pgt.mpt.gov.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01BC5014.D29B6AA0>