Date: Sat, 9 Sep 1995 18:59:18 +0200 (MET DST) From: Ollivier Robert <roberto@keltia.Freenix.FR> To: freebsd-current@FreeBSD.ORG (FreeBSD Current Users' list) Subject: sig 11 Message-ID: <199509091659.SAA00258@keltia.Freenix.FR>
next in thread | raw e-mail | index | archive | help
Is the problem with sig 11 supposed fixed ?
I just upgraded to CTM cvs-cur #1083,
CTM_BEGIN 2.0 cvs-cur 1083 19950909080002Z .
rebuilt a kernel and the lkms and I begin to get sig11 on sed at startup
(by the news user). They are the only so far but it is disturbing...
486DX-33, 32 MB, Diamond Stealth 64 VRAM and the following:
FreeBSD 2.2-CURRENT #0: Sat Sep 9 17:49:09 MET DST 1995
roberto@keltia.Freenix.FR:/src/src/sys/compile/KELTIA2
CPU: i486DX (486-class CPU)
real memory = 33554432 (32768K bytes)
avail memory = 31424512 (30688K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 10 maddr 0xcc000 msize 16384 on isa
ed0: address 00:00:c0:4d:ed:08, type WD8013EP (16 bit)
bpf: ed0 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
fd1: 1.2MB 5.25in
bt0: Bt747 / 0-PCI/EISA/VLB(32bit) bus
bt0: reading board settings, busmastering, int=12
bt0: version 3.37, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 2 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 6 sync rate= 4.54MB/s(220ns), offset=08
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 12 on isa
(bt0:0:0): "CONNER CFP1080S 3939" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 1030MB (2110812 512 byte sectors)
(bt0:2:0): "SEAGATE ST31200N 8158" type 0 fixed SCSI 2
sd2(bt0:2:0): Direct-Access 1006MB (2061108 512 byte sectors)
(bt0:6:0): "MATSHITA CD-ROM CR-8004 1.1f" type 5 removable SCSI 2
cd0(bt0:6:0): CD-ROM
cd0(bt0:6:0): NOT READY asc:3a,0 Medium not present
can't get the size
ahb0: reading board settings, int=11
ahb0 at 0x5000-0x50ff irq 11 on eisa slot 5
(ahb0:1:0): "MICROP 1624-07MZ1077801 HZ2P" type 0 fixed SCSI 2
sd1(ahb0:1:0): Direct-Access 642MB (1316751 512 byte sectors)
(ahb0:4:0): "TANDBERG TDC 3600 -07:" type 1 removable SCSI 1
st1(ahb0:4:0): Sequential-Access st1: Tandberg tdc3600 is a known rogue
density code 0x10, drive empty
(ahb0:5:0): "HP HP35480A 1009" type 1 removable SCSI 2
st0(ahb0:5:0): Sequential-Access density code 0x13, drive empty
sb0 at 0x220 irq 5 drq 3 on isa
sb0: <SoundBlaster Pro 3.1>
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
npx0 on motherboard
npx0: INT 16 interface
bpf: tun0 attached
bpf: sl0 attached
bpf: ppp0 attached
bpf: lo0 attached
bpf: ds0 attached
pid 123: sed: uid 8: exited on signal 11
pid 126: sed: uid 8: exited on signal 11
--
Ollivier ROBERT -=- The daemon is FREE! -=- roberto@keltia.frmug.fr.net
FreeBSD keltia.Freenix.FR 2.2-CURRENT #0: Sat Sep 9 17:49:09 MET DST 1995
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199509091659.SAA00258>