Date: Sat, 6 Jan 1996 03:08:33 -0500 From: taob@io.org To: FreeBSD-gnats-submit@freebsd.org Subject: kern/932: de0 incorrectly probes speed of UTP port Message-ID: <199601060808.DAA08757@zip.io.org> Resent-Message-ID: <199601060810.AAA03811@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 932 >Category: kern >Synopsis: de0 occasionally enables 100baseTX when plugged into 10baseT port >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sat Jan 6 00:10:01 PST 1996 >Last-Modified: >Originator: Brian Tao >Organization: Internex Online Inc., Toronto, Ontario, Canada >Release: FreeBSD 2.1-STABLE i386 >Environment: FreeBSD 2.1.0-RELEASE #0: Sat Dec 30 14:19:27 EST 1995 taob@flinch.io.org:/src/2.1.0-RELEASE/sys/compile/ZIP CPU: 133-MHz Pentium 735\90 or 815\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x52b Stepping=11 Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC> real memory = 134217728 (131072K bytes) avail memory = 130035712 (126988K bytes) Probing for devices on the ISA bus: vt0 at 0x60-0x6f irq 1 on motherboard vt0: unknown trident, 80 col, color, 8 scr, mf2-kbd, [R3.20-b24] sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface Probing for devices on the PCI bus: chip0 <Intel 82437 (Triton)> rev 2 on pci0:0 chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 de0 <Digital DC21140 Fast Ethernet> rev 18 int a irq 12 on pci0:9 de0: DC21140 [10-100Mb/s] pass 1.2 Ethernet address 00:00:c0:80:46:c8 de0: enabling 10baseT UTP port ncr0 <ncr 53c810 scsi> rev 2 int a irq 10 on pci0:1 1 ncr0 waiting for scsi devices to settle (ncr0:1:0): "QUANTUM FIREBALL1080S 1Q09" type 0 fixed SCSI 2 sd0(ncr0:1:0): Direct-Access sd0(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1042MB (2134305 512 byte sectors) sd0(ncr0:1:0): with 3835 cyls, 4 heads, and an average 139 sectors/track vga0 <VGA-compatible display device> rev 227 int a irq 11 on pci0:12 >Description: Hardware is an SMC 9332 EtherPower PCI controller plugged into an ASUS P/I-P55TP4XEG motherboard. The other end of the UTP cable is a port on a GVC 24-port 10baseT repeater hub. Approximately 1 out of 3 boots will result in the device probe enabling the 100baseTX UTP port rather than the 10baseT one (same physical port, different speeds). The collision and link LEDs for that port on the 10baseT hub are both on solid when this happens. Normally, only the link LED is lit. Rebooting the system will eventually fix the problem. The corresponding driver in NetBSD 1.1 for Intel exhibits the same problem. >How-To-Repeat: Plug the SMC 9332 Ethernet controller into a 10baseT hub and reboot with the de0 driver. >Fix: None known. >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199601060808.DAA08757>