Date: Sat, 13 Jun 1998 07:06:10 -0400 From: Randall Hopper <rhh@ct.picker.com> To: notme@lvdi.net Cc: "freebsd-questions@FreeBSD.ORG" <freebsd-questions@FreeBSD.ORG> Subject: Re: IDE Controller Message-ID: <19980613070610.A2626@ct.picker.com> In-Reply-To: <3581F38F.899462CF@lvdi.net>; from notme on Fri, Jun 12, 1998 at 08:35:43PM -0700 References: <Pine.BSF.3.95.980606100910.22014B-100000@current1.whistle.com> <357A2EE0.6A7E0B0E@lvdi.net> <19980612172024.A29182@ct.picker.com> <3581C7E0.743C5726@lvdi.net> <19980612210637.A936@ct.picker.com> <3581F38F.899462CF@lvdi.net>
next in thread | previous in thread | raw e-mail | index | archive | help
notme:
| I have just used the "dmesg | grep irq" command, and I can not see
|anything that looks like IRQ 15 except for this:
|
|vga0 <VGA-compatible display device> rev 20 int a irq 11 on pci0:15
|
|I am not really sure about what the 15 at the end means, so I just copied
I don't think that's a problem.
|it down onto this e-mail... I have also tried the "dmesg | grep 0x"
|command, and I couldn't find anything that is within the range of
|0x170-0x17F. I also went into Windows 95, and did a properties on
Sounds good.
|...secondary IDE controller...properties of the IDE controller...:
|Input/Output range 0170-0177
|Input/Output range 0376-0376
|Interrupt Request 15
|Input/Output range FFA8-FFAF
Interesting. To my untrained eye, this looks fine.
|Could it be because the Range suppose to be 0170 -0177 instead of
|0170 -017F? If so, how do you change that? (I can't find a way of
|changing the second value, "017F")
No, I'm sorry. I quoted the range wrong. It's 170-177. In fact, here are
the pertinent dmesg lines from my working configuration:
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa004 on isa
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa004 on isa
wdc2 at 0x1e8-0x1ef irq 11 flags 0xa0ffa004 on isa
|Anyway, I have to thank you for helping me so much!
No problem. I didn't help but we tried anyway.
One last parting thought: I assume you're still running the GENERIC kernel?
If you are, verify these lines are in /usr/src/sys/i386/conf/GENERIC for
the FreeBSD version you're running (you'll need to install the SSYS
distribution if you haven't). If you're not, verify they're in the kernel
config file you used to build your kernel:
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
options ATAPI #Enable ATAPI support for IDE bus
options ATAPI_STATIC #Don't do it as an LKM
device wcd0 #IDE CD-ROM
Sorry I couldn't help, and good luck.
Randall
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980613070610.A2626>