Date: Sun, 12 Dec 1999 16:59:00 +0000 From: Adam Wight <adamw@holonet.net> To: current@freebsd.org Subject: Among the ATA casualties... Message-ID: <19991212165900.A482@holonet.net>
next in thread | raw e-mail | index | archive | help
--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Against my better judgment, I've been running -current on, among other
machines, a Dell Latitude XP 475C... The wd driver manages to deal with
the inevitable cruft quite nicely, but the ata driver refuses to mount
the root partition.
To the best of my knowledge the chipset is the Western Digital 8110.
I can supply any other information required, of course.
-Adam Wight
boot -v output using the wd driver follows:
--ZGiS0Q5IWpPtfppv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="wd.v"
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #1: Sun Dec 12 12:04:07 GMT 1999
root@:/usr2/src/sys/compile/PROBOSCIS
Calibrating clock(s) ... i8254 clock: 1193395 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping = 0
Features=0x3<FPU,VME>
real memory = 37748736 (36864K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0029a000 - 0x023fdfff, 35012608 bytes (8548 pages)
avail memory = 34107392 (33308K bytes)
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0281000.
md0: Malloc disk
Creating DISK md0
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.1, connected at v1.0
isa0: <ISA bus> on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <ST9420AG>
wd0: 401MB (822016 sectors), 988 cyls, 16 heads, 52 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0003, dmamword = 0107, apio = 0003, udma = 0000
wdc0: unit 1 (atapi): <\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*/\M-*\M-*\M-*\M-*\M-*\M-*\M-*\M-*>, removable, cmd2, intr, ovlap, idma, iordy
wdc0: unit 1: unknown ATAPI type=10
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0001
psm0: strange result for test aux port (1).
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: status 10 00 64
psm: data 08 00 00
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 52 10 11 00 00 07 80 9c 8e da 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 52 10 11 00 00 07 80 9c 8e da 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0 kbd0
pcic: polling, can't alloc 0
pcic: polling, can't alloc 0
pcic0: <Vadem 468> on isa0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio2: not probed (disabled)
ppc: parallel port found at 0x378
ppc: chipset forced to generic
ppc0: SPP
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03da0f34 0..986=987 cylinders, 0..15=16 heads, 1..52=52 sectors
1:01300311 0..304=305 cylinders, 0..3=4 heads, 1..17=17 sectors
0 accounted for
Device configuration finished.
new masks: bio 40084040, tty 40031092, net 40071092
Mounting root from ufs:/dev/wd0s1a
wd0: wdcontrol: recal failed reading fsbn 0 (status 51<rdy,seekdone,err> error 4<abort>)
pccard: card inserted, slot 1
wd0s1: type 0xa5, start 52, end = 822015, size 821964 : OK
start_init: trying /sbin/init
devclass_alloc_unit: sio2 already exists, using next available unit number
sio3 at port 0x2e8-0x2ef irq 5 slot 1 on pccard1
sio3: type 16550A
splash: image decoder found: daemon_saver
--ZGiS0Q5IWpPtfppv--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991212165900.A482>