Date: 29 May 2000 04:23:44 -0000
From: avatar@mmlab.cse.yzu.edu.tw
To: FreeBSD-gnats-submit@freebsd.org
Subject: kern/18866: No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS")
Message-ID: <20000529042344.864.qmail@brahms.mmlab.cse.yzu.edu.tw>
next in thread | raw e-mail | index | archive | help
>Number: 18866
>Category: kern
>Synopsis: No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS")
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Sun May 28 21:30:01 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator: Tai-hwa Liang
>Release: FreeBSD 3.4-20000425-STABLE i386
>Organization:
Multimedia Laboratory at Yuan Ze University
>Environment:
FreeBSD 3.4-20000425-STABLE
FreeBSD 4.0-RELEASE
>Description:
No card in database for "PCMCIA CARD 56KFaxModem"("FM56C-NFS")
>How-To-Repeat:
Insert the Billionton 56K FAX modem into the PCMCIA slot, and the
above message would be popped on the console.
>Fix:
Apply following information in pccard.conf:
# Billionton 56Kbps Fax Modem
card "PCMCIA CARD 56KFaxModem" "FM56C-NFS"
config 0x22 "sio2" ?
insert echo "Billionton 56K modem card inserted"
remove echo "Billionton 56K modem card removed"
* DO NOT use `config auto "sio2"` on 4.0-RELEASE, or sio2 would be
identified as "sio2: 8250"; furthermore, a "cu -l /dev/cuaa2" with
some AT commands would lockup the system completely.
FYI(pccardc dumpcis):
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x15 (Version 1 info), length = 42
000: 05 01 50 43 4d 43 49 41 20 43 41 52 44 20 35 36
010: 4b 46 61 78 4d 6f 64 65 6d 00 46 4d 35 36 43 2d
020: 4e 46 53 00 35 2e 34 31 00 ff
Version = 5.1, Manuf = [PCMCIA CARD 56KFaxModem],card vers = [FM56C-NFS]
Addit. info = [5.41],[ÿ]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 4e 01 88 00
PCMCIA ID = 0x14e, OEM ID = 0x88
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 30 00 01 13
Reg len = 2, config register addr = 0x100, last config = 0x30
Registers: XX--X---
Tuple #6, code = 0x1b (Configuration entry), length = 19
000: e0 81 9d 5f 55 4d 5d 26 36 35 fc 14 aa 60 f8 03
010: 07 24 28
Config index = 0x20(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 2 x 100mA
Max current average over 1 second: 3 x 100mA
Power down supply current: 3 x 10mA
Wait scale Speed = 1.2 x 10 us
Card decodes 20 address lines
IRQ modes:
IRQs: BERR 2 4 9 11 13 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Read-only) (Power down supported) (Ext byte = 0x3)
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #10, code = 0x1b (Configuration entry), length = 6
000: 24 18 23 30 b8 1c
Config index = 0x24
Card decodes 3 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 3
Tuple #11, code = 0x1b (Configuration entry), length = 3
000: 30 08 23
Config index = 0x30
Card decodes 3 address lines, 8 Bit I/O only
Tuple #12, code = 0xff (Terminator), length = 0
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000529042344.864.qmail>