Date: Mon, 22 Oct 2001 20:48:25 -0700 From: Armando Cerna <armando@thefoodlist.com> To: Andrew Reid <andrew.reid@plug.cx> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Sound HELP! Message-ID: <200110230347.UAA09527@cedar.he.net> In-Reply-To: <20011023132851.D37925@plug.cx> References: <200110230308.UAA07787@cedar.he.net> <20011023132851.D37925@plug.cx>
next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 22 October 2001 08:58 pm, Andrew Reid wrote:
> On Mon, Oct 22, 2001 at 08:09:20PM -0700, Armando Cerna wrote:
> > I am trying to record sound in freebsd and I can't get it working I try
> > rec and it says hit control c to stop recording but it just quits. I
> > have a soundblaster live value PCI and the following kernel
> > configuration
>
> Can you send a dmesg?
>
> - andrew
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #7: Fri Oct 5 15:47:59 PDT 2001
armando@grover:/usr/src/sys/compile/GROVER
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) processor (1200.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 201261056 (196544K bytes)
avail memory = 192438272 (187928K bytes)
Preloaded elf kernel "kernel" at 0xc035a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pcm0: <Creative EMU10K1> port 0xdc00-0xdc1f irq 12 at device 8.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xea000000-0xea0000ff
irq 11 at device 13.0 on pci0
rl0: Ethernet address: 00:50:ba:47:a8:0b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 26059MB <Maxtor 92732U8> [52946/16/63] at ata0-master UDMA33
afd0: 96MB <IOMEGA ZIP 100 ATAPI> [32/64/96] at ata0-slave using PIO0
acd0: DVD-ROM <HITACHI DVD-ROM GD-5000> at ata1-master using PIO4
acd1: CD-RW <Hewlett-Packard CD-Writer Plus 9300> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name:
build-570 $
/dev/vmmon: Module vmmon: initialized
pid 7450 (mozilla-bin), uid 1001: exited on signal 11
pcm0: record interrupt timeout, channel dead
pcm0: record interrupt timeout, channel dead
pcm0: record interrupt timeout, channel dead
^-----I just noticed this anyone know what it means?
Armando
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200110230347.UAA09527>