Date: Wed, 5 Dec 2001 04:43:46 -0800 (PST) From: Ross Lippert <ripper@eskimo.com> To: freebsd-stable@freebsd.org Subject: 4.4-RELEASE- pcm0: play interrupt timeout, channel dead Message-ID: <200112051243.EAA07514@eskimo.com>
next in thread | raw e-mail | index | archive | help
Hi, This just recently started coming up when running the stella port. It basically makes stella-sound unusable. This didn't happen before 4.4 RELEASE. Currently, I haven't found another app with sound that is affected other than stella (mpg123, xmms, work great). I've noticed some stuff in the archives about messages such as the one above on other people's 4.4's. Any news on the fixed-ness of such a problem? Attached is dmesg and /dev/sndstat -r bash-2.05# cat /dev/sndstat FreeBSD Audio Driver (newpcm) Oct 17 2001 04:09:22 Installed devices: pcm0: <SB16 DSP 4.16> at io 0x220 irq 5 drq 1:5 (1p/1r/0v channels duplex) bash-2.05# dmesg Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-RELEASE #0: Wed Oct 17 04:11:04 EDT 2001 root@:/usr/src/sys/compile/monasbitch Timecounter "i8254" frequency 1193182 Hz CPU: Cyrix 6x86MX (224.80-MHz 686-class CPU) Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0853 Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX> real memory = 167706624 (163776K bytes) avail memory = 158158848 (154452K bytes) Preloaded elf kernel "kernel" at 0xc04d2000. md0: Malloc disk Using $PIR table, 6 entries at 0xc00fdcb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <VIA 82C597 (Apollo VP3) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C586 ATA33 controller> port 0xe000-0xe00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered sis0: <NatSemi DP83815 10/100BaseTX> port 0xe800-0xe8ff mem 0xea002000-0xea002fff irq 10 at device 8.0 on pci0 sis0: Ethernet address: 00:02:e3:05:19:28 miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ohci0: <NEC uPD 9210 USB controller> mem 0xea003000-0xea003fff irq 3 at device 9.0 on pci0 usb1: OHCI version 1.0 usb1: <NEC uPD 9210 USB controller> on ohci0 usb1: USB revision 1.0 uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xea000000-0xea000fff irq 9 at device 9.1 on pci0 usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci1 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 9.2 irq 9 pci0: <S3 ViRGE DX/GX graphics accelerator> at 10.0 irq 9 pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 isa0: too many dependant configs (8) isa0: unexpected small tag 14 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 pcm0: <SB16 DSP 4.16> on sbc0 ad0: 19092MB <WDC WD200BB-32AUA1> [38792/16/63] at ata0-master UDMA33 ad2: 4125MB <FUJITSU MPC3043AT> [8940/15/63] at ata1-master UDMA33 acd0: CDROM <LTN301> at ata1-slave using PIO4 Mounting root from ufs:/dev/ad0s1a umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 2 umass0: Get Max Lun not supported (STALLED) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device da0: 650KB/s transfers da0: 7MB (15681 512 byte sectors: 64H 32S/T 7C) pcm0: play interrupt timeout, channel dead pcm0: play interrupt timeout, channel dead To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112051243.EAA07514>