Date: Tue, 12 Nov 2002 07:14:06 -0800 (PST) From: Christopher Plain <cpplain@yahoo.com> To: freebsd-mobile@freebsd.org Subject: ThinkPad I 1400 - Custom Kernel Message-ID: <20021112151406.40607.qmail@web20004.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
About two weeks ago I installed FreeBSD for the first time; I did this on
my ThinkPad I 1400. Today I compiled a custom kernel, also for the first
time. I would like someone familiar with this laptop to look at my kernel
configuration and see if there are any changes that I should make to the
configuration. I am sure that I might have either missed something that
should be included or included something that doesn't need to be in the
kernel.
My hardware is as follows:
Celeron 433
128M RAM
6G Hard Drive
DVD/CD ROM
PCMCIA CardBus
XGA ATI Rage Mobility M 4M RAM Graphics Chipset
1024x768 TFT Active Matrix Display
ESS Solo 1 Sound Chipset
Following is my kernel configuration file:
machine i386
ident THINKPADI1400
maxusers 0
options INCLUDE_CONFIG_FILE # Include this file in kernel
# CPU OPTIONS
cpu I686_CPU
options CPU_ENABLE_SSE # Enables SSE/MMX2 instructions support
# COMPATABILITY OPTIONS
options COMPAT_43 # Compatability with BSD 4.3 [KEEP THIS!]
options USER_LDT # Allow user-level control of i386 LDT
options SYSVSHM # SYSV-style shared memory
options SYSVSEM # SYSV-style semaphores
options SYSVMSG # SYSV-style message queues
options COMPAT_LINUX # Linux binary compatability
# NETWORKING OPTIONS
# Protocol Families:
options INET # Internet communications protocols
options INET6 # IPv6 communications protocols
options IPSEC # IP security
options IPSEC_ESP # IP security (crypto; define w/ IPSEC)
# Network Interfaces:
pseudo-device ether # Ethernet support
pseudo-device loop # Network loopback device
pseudo-device bpf # Berkeley packet filter
pseudo-device tun # Tunnel driver
pseudo-device ppp 1 # Point-to-point protocol
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6 to IPv4 translation
# FILESYSTEM OPTIONS
options FFS # Berkeley Fast Filesystem
options FFS_ROOT # FFS usable as root device [KEEP THIS!]
options NFS # Network Filesystem
options CD9660 # ISO 9660 Filesystem
options CD9660_ROOT # CD-ROM usable as root device
options PROCFS # Proces filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_DIRHASH # Improve performance on big directories
# POSIX P1003.1B
options P1003_1B # Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
# MISCELLANEOUS DEVICES AND OPTIONS
pseudo-device pty # Pseudo ttys
# HARDWARE DEVICE CONFIGURATION
# ISA Device:
device isa
# Keyboard and PS/2 Mouse Controller:
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x01 flags 0x02
device psm0 at atkbdc? irq 12
# Video Card Driver:
device vga0 at isa?
# Splash Screen:
pseudo-device splash
# Syscons Console Driver:
device sc0 at isa?
options SC_TWOBUTTON_MOUSE
# Floating Point Support [KEEP THIS!]:
device npx0 at nexus? port IO_NPX flags 0x0 irq 13
# ATA and ATAPI Devices:
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# Floppy Disk Controller:
device fdc0 at isa? port IO_FD1 irq 6 drq2
device fd0 at fdc0 drive 0
# Network Interfaces:
device miibus #MII bus support
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
# Audio Drivers:
device pcm
device pca0 at isa? port IO_TIMER1
# Advanced Power Management:
device apm0
#PCI Devices:
device pci
# PCCARD (PCMCIA) Support:
device pcic0 at isa?
device card
# Serial Port:
device sio0 at isa? irq 0 port 0x3e0 iomem 0xd0000
# Parallel Port:
device ppc0 at isa? irq7
device ppbus # Parallel port bus
device lpt # Parallel printer
# USB Support:
device ohci # OHCI controller
device usb # USB bus
device ugen # Generic USB driver
device ukbd # USB keyboard driver
device ulpt # USB printer driver
device ums # USB mouse driver
Following is my dmseg.boot:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #3: Tue Nov 12 06:19:38 PST 2002
christopher@christopher.opsource.net:/usr/src/sys/compile/THINKPADI1400
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (432.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126521344 (123556K bytes)
Preloaded elf kernel "kernel" at 0xc03f7000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03f709c.
Pentium Pro MTRR support enabled
pcibios: No call entry point
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 6.0 irq 9
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <ESS Solo-1 (unknown vendor)> port
0x90a4-0x90a7,0x9090-0x9093,0x9070-0x907f,0x9050-0x905f,0x9000-0x903f irq 5
at device 8.0 on pci0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x78c0-0x78cf irq 15 at
device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> at device 17.0 on pci0
pcic0: <O2micro 6812/6872 PCI-Cardbus Bridge> irq 9 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card 16-bit bus (classic)> on pcic0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0x82600000-0x82600fff irq 10 at device 20.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x2 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pca0 at port 0x40 on isa0
ppc0: cannot reserve I/O port range
IPsec: Initialized Security Association Processing.
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 5729MB <IBM-DARA-206000> [12416/15/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2202> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
If you need any further information let me know.
Thank you for your help,
Christopher Plain
cpplain@yahoo.com
__________________________________________________
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021112151406.40607.qmail>