Date: Sun, 20 Jun 2004 11:31:44 GMT From: Ray Newman <raymond@unixworks.com.au> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/68140: Problem with Sony AIT ATAPI Tape dirve Message-ID: <200406201131.i5KBVihG045458@www.freebsd.org> Resent-Message-ID: <200406201140.i5KBeLsh012960@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 68140 >Category: i386 >Synopsis: Problem with Sony AIT ATAPI Tape dirve >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jun 20 11:40:20 GMT 2004 >Closed-Date: >Last-Modified: >Originator: Ray Newman >Release: 5.2.1 >Organization: One Support Pty Ltd >Environment: FreeBSD monster.qmm 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #2: Mon Jun 14 17:40:07 EST 2004 one@monster.qmm:/usr/src/sys/i386/compile/MONSTER i386 >Description: I have added a Sony SDX-420 ATAPI tape drive to a FreeBSD 5.2.1-RELEASE system. The tape successfully does a dump and restore on this system but when the tape is taken to a Sony SDX-400 SCSI tape drive on a FreeBSD 4.7-RELEASE system, restore insists that the tape blocks are 512 bytes and this is not a multiple of 1024 (the tape was created with a -b 32). I have then taken the backup from the SCSI drive (where it reads) and attempted to read it on the ATAPI drive; the result looks like: monster# mt -f /dev/nast0 status Mode Density Blocksize bpi Compression Current: 0x01:X3.22-1983 512 bytes 800 0x1 ---------available modes--------- 0: default variable 0 none 1: default variable 0 none 2: default variable 0 none 3: default variable 0 none --------------------------------- File Number: 0 Record Number: 0 Residual Count 0 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape monster# atacontrol info 1 Master: ast0 <SONY SDX-420C/0101> ATA/ATAPI rev 5 Slave: acd0 <SONY CD-RW CRX175A1/5YS3> ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = UDMA66 <<<--- I had set this Slave = PIO4 monster# atacontrol reinit 1 Master: ast0 <SONY SDX-420C/0101> ATA/ATAPI rev 5 Slave: acd0 <SONY CD-RW CRX175A1/5YS3> ATA/ATAPI rev 0 monster# atacontrol mode 1 Master = PIO4 <<<--- It reverts Slave = PIO4 monster# mt -f /dev/nast0 rew monster# restore -t -b32 -f /dev/nast0 Tape read error while trying to set up tape continue? [yn] y Tape is not a dump tape >How-To-Repeat: as above >Fix: Unfortunately none. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406201131.i5KBVihG045458>