Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Sep 2004 22:35:25 +0200
From:      Johan Karlsson <johan@freebsd.org>
To:        Nate Lawson <nate@root.org>
Cc:        Adrian Steinmann <ast@marabu.ch>
Subject:   Re: 5.3-BETA5 panics when inserting dc0 carbus card (only with ACPI enabled)	enabled)
Message-ID:  <20040922203525.GC18509@numeri.campus.luth.se>
In-Reply-To: <4151DA08.6010602@root.org>
References:  <20040922081616.GA18509@numeri.campus.luth.se> <200409221620.SAA14914@marabu.marabu.ch> <20040922193406.GB18509@numeri.campus.luth.se> <4151DA08.6010602@root.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Sep 22, 2004 at 13:01 (-0700), Nate Lawson wrote:
> 
> Um, what is the dc0 card doing mapping ports 0-0xff:
> 
> Below the analogous output Johan Karlsson <johan@freebsd.org> posted
> for his Xircom X3201 10/100BaseTX card for 5.3-BETA5:
> 
> dc0: <Netgear FA511 10/100BaseTX> port 0-0xff mem 0x88000000-0x880003ff 
> at device 0.0 on cardbus0
> cbb alloc res fail
> dc0: couldn't map ports/memory
> 
> Dmesg from boot with a working kernel for dc0 would help as well as 
> devinfo -r from a non-working one.

I have found a work-around: add

debug.acpi.disabled="sysresource"

to /boot/loader.conf.


Via http://numeri.campus.luth.se/~k/T20/ you can find the info from my computer
dmesg.acpi - ACPI enabled (panics when card is inserted)
dmesg.no_acpi - ACPI disabled (works)
dmesg.acpi.sysresource - with debug.acpi.disabled="sysresource" (works)
devinfo-r.sysresource - booted with debug.acpi.disabled="sysresource"
devinfo-r - booted with ACPI enabled
panic.msg - the panic message when booted with ACPI fully enabled
kgdb.out - scripted kgdb output

All this is with 5.3-BETA5

I hope this info helps.

/Johan K

-- 
Johan Karlsson		mailto:johan@FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040922203525.GC18509>