Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 31 Jan 2006 03:08:03 -0500
From:      Anish Mistry <mistry.7@osu.edu>
To:        freebsd-stable@freebsd.org
Subject:   dc0: watchdog timeout and nve0: device timeout
Message-ID:  <200601310308.20103.mistry.7@osu.edu>

next in thread | raw e-mail | index | archive | help
--nextPart4950028.vBFXTknhei
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

After updating to STABLE today I'm getting the following message with=20
my dc and nve NICs every few seconds.  UP, AMD64.  A kernel from last=20
Thursday was fine.

dc0: watchdog timeout
nve0: device timeout (4)

=46reeBSD 6.0-STABLE #9: Mon Jan 30 20:21:17 UTC 2006
    root@kevin.united-ware.com:/usr/obj/usr/src/sys/KEVIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 2800+ (1808.26-MHz K8-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0xf4a  Stepping =3D 10
 =20
=46eatures=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  =3D 535691264 (510 MB)
avail memory =3D 508751872 (485 MB)
ACPI APIC Table: <nVidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboardnfiguration
acpi0: <nVidia AWRDACPI> on motherboardal/share/config/kdm/kdmrc (from=20
kde >=3D 2.  acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 2.3)
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=BF
agp0: <NVIDIA nForce3-250 AGP Controller> mem 0xf0000000-0xf7ffffff at=20
device 0.0 on pci0                                    =B3      ______
isab0: <PCI-ISA bridge> at device 1.0 on pci0    |  ____| __ ___  ___=20
isa0: <ISA bus> on isab0reeBSD!            =B3     | |__ | '__/ _ \/ _ \
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)  __/  __/
pci0: <serial bus, USB> at device 2.0 (no driver attached) |    |    |
pci0: <serial bus, USB> at device 2.1 (no driver attached)  \___|\___|
pci0: <serial bus, USB> at device 2.2 (no driver attached)____ _____
pci0: <bridge> at device 5.0 (no driver attached)|  _ \ / ____|  __ \
pcm0: <nVidia nForce3 250> port 0xf600-0xf6ff,0xfb00-0xfb7f mem=20
0xfebfb000-0xfebfbfff irq 11 at device 6.0 on pci0 logging   =B3     | =20
_ < \___ \| |  | |
pcm0: <Avance Logic ALC655 AC97 Codec>     =B3     | |_) |____) | |__| |
atapci0: <nVidia nForce3 Pro UDMA133 controller> port=20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 8.0 on=20
pci0=B3     |____/|_____/|_____/
ata0: <ATA channel 0> on atapci0           =B3
ata1: <ATA channel 1> on atapci0           =B3
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci1: <ACPI PCI bus> on pcib1r default     =B3
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xde00-0xdeff mem=20
0xfeaff000-0xfeaff0ff irq 11 at device 3.0 on pci2
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:a0:cc:37:02:bf
acpi_tz0: <Thermal Zone> on acpi0
nve0: <NVIDIA nForce MCP7 Networking Adapter> port 0xfc00-0xfc07 mem=20
0xfebfc000-0xfebfcfff irq 10 at device 5.0 on pci0
nve0: Ethernet address 00:30:18:a4:37:7c
miibus1: <MII bus> on nve0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus1
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=20
1000baseT-FDX, auto
nve0: Ethernet address: 00:30:18:a4:37:7c
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10=20
on acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7=20
drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd17ff on=20
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on=20
isa0
Timecounter "TSC" frequency 1808256838 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38162MB <WDC WD400BB-23FJA0 13.03G13> at ata0-master UDMA100
ad1: 32253MB <HDS728080PLAT20 PF2OA21B> at ata0-slave UDMA133
acd0: CDRW <BENQ CDRW 5232X/KPEY> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <BENQ CDRW 5232X KPEY> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: cd present [1 x 2048 byte records]
=2D-=20
Anish Mistry

--nextPart4950028.vBFXTknhei
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)

iD8DBQBD3xr0xqA5ziudZT0RAvJAAKCwOhWCBuown2McyHgG3yV33ijydACfSouJ
m1Kth87B92CyaTFX0DFbRcU=
=Y8nn
-----END PGP SIGNATURE-----

--nextPart4950028.vBFXTknhei--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200601310308.20103.mistry.7>