Date: Tue, 25 Apr 2006 04:56:50 GMT From: Paul Blair <toadlife@toadlife.net> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/96302: nVidia nForce CK804 SATA300 controller not recognizing SATA CD-ROM drive Message-ID: <200604250456.k3P4uoeU034377@www.freebsd.org> Resent-Message-ID: <200604250500.k3P50Qp5014749@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 96302 >Category: i386 >Synopsis: nVidia nForce CK804 SATA300 controller not recognizing SATA CD-ROM drive >Confidential: no >Severity: serious >Priority: low >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Apr 25 05:00:26 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Paul Blair >Release: 6.1 RC (April 23 2006) >Organization: >Environment: FreeBSD athlonxp-bsd.toadlife.kicks-ass.net 6.1-RC FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006 paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel i386 >Description: I have a ASUS A8N 32 SLI Deluxe Deluxe Motherboard. It's on-board SATA controller is shown as "nVidia nForce CK804 SATA300" controller at bootup. I have a Plextor PX-716SA SATA DVDRW drive connected to it, and it is not detected by FreeBSD. The drive is detected by the BIOS, and is operational in Windows. I tried moving the drive from SATA port 1 to port 4 on the motherboard to no avail. I also have an Areca 1210 PCI-E SATAII RAID controller, in which my hard drives are connected. Unfortunately it doesn't do CD drives, so I can't plug my Plextor into it. Here is my full dmesg output.. FreeBSD athlonxp-bsd.toadlife.kicks-ass.net 6.1-RC FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006 paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel i386 %dmesg Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RC #5: Mon Apr 24 20:00:39 PDT 2006 paul@athlonxp-bsd.toadlife.kicks-ass.net:/usr/obj/usr/src/sys/mykernel Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2210.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 2147155968 (2047 MB) avail memory = 2091921408 (1995 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <mass storage> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci3: <ACPI PCI bus> on pcib3 nvidia0: <GeForce 7800 GT> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 17 at device 0.0 on pci3 nvidia0: [GIANT-LOCKED] pci0: <memory> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: waiting for BIOS to give up control usb1: timed out waiting for BIOS usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered uhub1: device problem (TIMEOUT), disabling port 9 atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0xe480-0xe487,0xe400-0xe403,0xe080-0xe087,0xe000-0xe003,0xdc00-0xdc0f mem 0xfebfd000-0xfebfdfff irq 23 at device 16.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0xd880-0xd887,0xd800-0xd803,0xd480-0xd487,0xd400-0xd403,0xd080-0xd08f mem 0xfebfc000-0xfebfcfff irq 20 at device 17.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <multimedia, video> at device 7.0 (no driver attached) pcm0: <Creative EMU10K1> port 0xc880-0xc89f irq 18 at device 8.0 on pci4 pcm0: <SigmaTel STAC9721/23 AC97 Codec> nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xd000-0xd007 mem 0xfebfb000-0xfebfbfff irq 21 at device 19.0 on pci0 nve0: Ethernet address 00:15:f2:cc:a8:2c miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:15:f2:cc:a8:2c pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <PCI-PCI bridge> at device 0.0 on pci6 pci8: <PCI bus> on pcib7 arcmsr0: <ARECA ARC1210 PCI-EXPRESS 4 PORTS SATA RAID CONTROLLER Driver Version 1.20.00.02> mem 0xfeaff000-0xfeafffff,0xdf800000-0xdfbfffff irq 19 at device 14.0 on pci8 arcmsr0: [GIANT-LOCKED] pcib8: <PCI-PCI bridge> at device 0.2 on pci6 pci7: <PCI bus> on pcib8 acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle da0 at arcmsr0 bus 0 target 0 lun 0 da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-3 device da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled da0: 572204MB (1171874816 512 byte sectors: 255H 63S/T 72945C) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/da0s2a >How-To-Repeat: Plug Plextor PX-716SA into SATA port on ASUS A8N 32 SLI Deluxe Deluxe Motherboard. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604250456.k3P4uoeU034377>