Date: Wed, 20 Dec 2006 04:44:49 GMT From: kozo<kakehi@kme.co.jp> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/106960: 6.2 can't find SATA secondary drive, but 6.1 can find. Message-ID: <200612200444.kBK4ineI098633@www.freebsd.org> Resent-Message-ID: <200612200450.kBK4oCnm051829@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 106960 >Category: misc >Synopsis: 6.2 can't find SATA secondary drive, but 6.1 can find. >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Dec 20 04:50:11 GMT 2006 >Closed-Date: >Last-Modified: >Originator: kozo >Release: 6.2-PRERELEASE >Organization: KUME DENKI CO.LTD. >Environment: FreeBSD pp.kme.co.jp 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Dec 19 19:52:39 JST 2006 root@pp.kme.co.jp:/usr/ obj/usr/src/sys/GENERIC-KK i386 >Description: 6.2-PRERELEASE(RC1) can't find SATA 2nd ch's drive. 6.1-Stable (Sep.2006) can find SATA 2nd ch's drive as ad10. If force boot from SATA-2nd (by BIOS setting), 6.2-PRERELEASE can boot, but can't find ad10. ad8(SATA ch0:ata4) and ad10(SATA ch1:ata5) has same disklabels. # /dev/ad8s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 1048576 0 4.2BSD 2048 16384 8 b: 2044560 1048576 swap c: 625137282 0 unused 0 0 # "raw" part, don't edit d: 3119104 3093136 4.2BSD 2048 16384 28552 e: 1048576 6212240 4.2BSD 2048 16384 8 f: 16777216 7260816 4.2BSD 2048 16384 28552 g: 601099250 24038032 4.2BSD 2048 16384 28552 d,f,g partitions are gmirrored, and e partition are gstriped. ccd1,ccd2 are constructed on PATA. My kernel is GENERIC + ccd,vlan. CPU: Celeron D352 M/B: ASRock 775Dual-VSTA VIA PT880/VT8237A dmesg is Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #3: Tue Dec 19 19:52:39 JST 2006 root@pp.kme.co.jp:/usr/obj/usr/src/sys/GENERIC-KK ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) D CPU 3.20GHz (3213.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf64 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR ,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe41d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>,<b15>> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> real memory = 536543232 (511 MB) avail memory = 515624960 (491 MB) ioapic0 <Version 0.3> irqs 0-23 on motherboard ioapic1 <Version 0.3> irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI-1304: *** Error: Method execution failed [\\_PR_.CPU1._PDC] (Node 0xc328b780), AE_BAD_HEADER pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, interrupt controller> at device 0.5 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ti0: <Netgear GA620 1000baseSX Gigabit Ethernet> mem 0xff6f8000-0xff6fbfff irq 17 at device 9.0 on pci0 ti0: Ethernet address: 00:a0:cc:73:48:73 ti0: if_start running deferred for Giant ti0: [GIANT-LOCKED] atapci0: <ITE IT8212F UDMA133 controller> port 0xd400-0xd407,0xcc00-0xcc03,0xc880-0xc887,0xc800-0xc803,0xc480-0xc48f ir q 16 at device 12.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <VIA 8237A SATA150 controller> port 0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd887,0xd800-0xd803,0xd480-0xd48f,0xd0 00-0xd0ff irq 21 at device 15.0 on pci0 ata4: <ATA channel 0> on atapci1 ata5: <ATA channel 1> on atapci1 atapci2: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 22 at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xe480-0xe49f irq 21 at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 23 at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xff6ff800-0xff6ff8ff irq 21 at device 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xff6ffc00-0xff6ffcff irq 23 at device 18.0 on pci0 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: 00:13:8f:e7:2a:63 pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci128: <ACPI PCI bus> on pcib3 pci128: <multimedia> at device 1.0 (no driver attached) acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3213544728 Hz quality 800 Timecounters tick every 1.000 msec IPv6 packet filtering initialized, unlimited logging ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited ad4: 76319MB <Seagate ST380021A 3.10> at ata2-master UDMA100 ad4: Adaptec unknown RAID type 0x05 ad5: 76319MB <Seagate ST380021A 3.19> at ata2-slave UDMA100 ad5: Adaptec unknown RAID type 0x05 ad6: 114473MB <Seagate ST3120026A 8.01> at ata3-master UDMA100 ad7: 114473MB <Seagate ST3120026A 3.54> at ata3-slave UDMA100 ad8: 305245MB <Hitachi HDT725032VLA380 V54OA52A> at ata4-master SATA150 GEOM_MIRROR: Device var created (id=2716759581). GEOM_MIRROR: Device var: provider ad8s1d detected. GEOM_STRIPE: Device tmp created (id=1326731203). GEOM_STRIPE: Disk ad8s1e attached to tmp. GEOM_MIRROR: Device usr created (id=2964578398). GEOM_MIRROR: Device usr: provider ad8s1f detected. GEOM_MIRROR: Device home created (id=3919327070). GEOM_MIRROR: Device home: provider ad8s1g detected. Root mount waiting for: GMIRROR GMIRROR GMIRROR Root mount waiting for: GMIRROR GMIRROR GMIRROR Root mount waiting for: GMIRROR GMIRROR GMIRROR Root mount waiting for: GMIRROR GMIRROR GMIRROR GEOM_MIRROR: Force device var start due to timeout. GEOM_MIRROR: Device var: provider ad8s1d activated. GEOM_MIRROR: Device var: provider mirror/var launched. Root mount waiting for: GMIRROR GMIRROR GEOM_MIRROR: Force device usr start due to timeout. GEOM_MIRROR: Device usr: provider ad8s1f activated. GEOM_MIRROR: Device usr: provider mirror/usr launched. GEOM_MIRROR: Force device home start due to timeout. GEOM_MIRROR: Device home: provider ad8s1g activated. GEOM_MIRROR: Device home: provider mirror/home launched. Trying to mount root from ufs:/dev/ad8s1a ccd1: mirror/parity forces uniform flag ccd2: mirror/parity forces uniform flag ti0: gigabit link up >How-To-Repeat: Every time. >Fix: Nothing. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612200444.kBK4ineI098633>