Date: Sun, 18 Nov 2012 22:20:01 GMT From: Peter Wullinger <peter.wullinger+freebsd@googlemail.com> To: freebsd-fs@FreeBSD.org Subject: Re: kern/153520: [zfs] Boot from GPT ZFS root on HP BL460c G1 unstable. Message-ID: <201211182220.qAIMK1oY061509@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/153520; it has been noted by GNATS.
From: Peter Wullinger <peter.wullinger+freebsd@googlemail.com>
To: bug-followup@FreeBSD.org
Cc:
Subject: Re: kern/153520: [zfs] Boot from GPT ZFS root on HP BL460c G1
unstable.
Date: Sun, 18 Nov 2012 23:10:42 +0100
I see this too on two identical HP Proliant 320 DL G6 with 9-STABLE.
The machine usually needs some nudging in the form of warm restarts
to boot the operating system.
=3D=3D bootloader output =3D=3D
error 1 lba 32
error 1 lba 1
No ZFS pools located, can't boot
=3D=3D bootloader output =3D=3D
=3D=3D gpart show =3D=3D
=3D> 34 488326973 da0 GPT (232G)
34 128 1 freebsd-boot (64k)
162 67108864 2 freebsd-swap (32G)
67109026 421217981 3 freebsd-zfs [bootme] (200G)
=3D=3D gpart show =3D=3D
Root is on a hardware-mirror provided by the machine's HPQ Smart Array P410i
The other 6 drives are configured as JBOD with a raidz2 data pool
(not shown here)
=3D=3D zpool status rpool =3D=3D
zpool status rpool
pool: rpool
state: ONLINE
scan: scrub repaired 0 in 0h12m with 0 errors on Wed Nov 7 04:47:21 2012
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
da0p3 ONLINE 0 0 0
errors: No known data errors
=3D=3D zpool status rpool =3D=3D
=3D=3D zdb =3D=3D
rpool:
version: 28
name: 'rpool'
state: 0
txg: 22695230816
pool_guid: 16981309850887562666
hostid: 1031366389
hostname: '...'
vdev_children: 1
vdev_tree:
type: 'root'
id: 0
guid: 16981309850887562666
children[0]:
type: 'disk'
id: 0
guid: 6716485486554561877
path: '/dev/da0p3'
phys_path: '/dev/da0p3'
whole_disk: 0
metaslab_array: 23
metaslab_shift: 31
ashift: 9
asize: 215658790912
is_log: 0
DTL: 65
=3D=3D zdb =3D=3D
=3D=3D dmesg =3D=3D
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-PRERELEASE #3 r242394: Wed Oct 31 13:15:48 CET 2012
src@...:/usr/obj/usr/src/sys/ML350 amd64
CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (2000.12-MHz K8-class =
CPU)
Origin =3D "GenuineIntel" Id =3D 0x106a5 Family =3D 0x6 Model =3D 0x1a=
Stepping =3D 5
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,P=
DCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory =3D 6442450944 (6144 MB)
avail memory =3D 6177263616 (5891 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20=
110527/tbfadt-638)
ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (2011=
0527/tbfadt-638)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfb000000-0xfb3fffff,=
0xfaff0000-0xfaff0fff irq 28 at device 0.0 on pci4
ciss0: PERFORMANT Transport
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci23: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci11: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci24: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci14: <ACPI PCI bus> on pcib7
ciss1: <HP Smart Array P212> port 0x5000-0x50ff mem 0xfb800000-0xfbbfffff,0=
xfb7f0000-0xfb7f0fff irq 30 at device 0.0 on pci14
ciss1: PERFORMANT Transport
pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci25: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci17: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci20: <ACPI PCI bus> on pcib10
mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem 0xfbff0000-0xfbff3=
fff,0xfbfe0000-0xfbfeffff irq 33 at device 0.0 on pci20
mpt0: MPI Version=3D1.5.16.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver att=
ached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver att=
ached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver att=
ached)
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib12
bge0: <HP NC326i Dual Port PCI-E Gigabit Adapter, ASIC rev. 0x009003> mem 0=
xfaef0000-0xfaefffff,0xfaee0000-0xfaeeffff irq 16 at device 4.0 on pci3
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus0: <MII bus> on bge0
brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:25:b3:ad:a5:8c
bge1: <HP NC326i Dual Port PCI-E Gigabit Adapter, ASIC rev. 0x009003> mem 0=
xfaed0000-0xfaedffff,0xfaec0000-0xfaecffff irq 17 at device 4.1 on pci3
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz
miibus1: <MII bus> on bge1
brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:25:b3:ad:a5:8d
uhci0: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq =
20 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq =
23 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq =
22 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq =
23 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfabf0000-0xfa=
bf03ff irq 20 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib13: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xf0000000-0xf7fff=
fff,0xfadf0000-0xfadfffff irq 23 at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device =
4.4 on pci1
usbus5 on uhci4
ipmi0: <IPMI System Interface> mem 0xfacf0000-0xfacf00ff irq 21 at device 4=
=2E6 on pci1
ipmi0: using KSC interface
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x10c0-0x10c7,0x10c8-0x10cb,=
0x10d0-0x10d7,0x10d8-0x10db,0x10e0-0x10ef,0x10f0-0x10ff irq 17 at device 31=
=2E5 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
qpi0: <QPI system bus> on motherboard
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
(probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe0:ciss0:0:0:0): CAM status: SCSI Status Error
(probe0:ciss0:0:0:0): SCSI status: Check Condition
(probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe0:ciss0:0:0:0): Error 22, Unretryable error
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
(probe1:ciss0:0:1:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe1:ciss0:0:1:0): CAM status: SCSI Status Error
(probe1:ciss0:0:1:0): SCSI status: Check Condition
(probe1:ciss0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe1:ciss0:0:1:0): Error 22, Unretryable error
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <0x103c> at usbus5
uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
(probe2:ciss0:0:2:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe2:ciss0:0:2:0): CAM status: SCSI Status Error
(probe2:ciss0:0:2:0): SCSI status: Check Condition
(probe2:ciss0:0:2:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe2:ciss0:0:2:0): Error 22, Unretryable error
ipmi0: IPMI device rev. 1, firmware rev. 2.07, version 2.0
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20
ipmi0: Number of channels 0
(probe3:ciss0:0:3:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe3:ciss0:0:3:0): CAM status: SCSI Status Error
(probe3:ciss0:0:3:0): SCSI status: Check Condition
(probe3:ciss0:0:3:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe3:ciss0:0:3:0): Error 22, Unretryable error
ipmi0: Attached watchdog
(probe4:ciss0:0:4:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe4:ciss0:0:4:0): CAM status: SCSI Status Error
(probe4:ciss0:0:4:0): SCSI status: Check Condition
(probe4:ciss0:0:4:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe4:ciss0:0:4:0): Error 22, Unretryable error
(probe5:ciss0:0:5:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe5:ciss0:0:5:0): CAM status: SCSI Status Error
(probe5:ciss0:0:5:0): SCSI status: Check Condition
(probe5:ciss0:0:5:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe5:ciss0:0:5:0): Error 22, Unretryable error
(probe6:ciss0:0:6:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0=20
(probe6:ciss0:0:6:0): CAM status: SCSI Status Error
(probe6:ciss0:0:6:0): SCSI status: Check Condition
(probe6:ciss0:0:6:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command=
operation code)
(probe6:ciss0:0:6:0): Error 22, Unretryable error
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 1(1VOLUME OK> Fixed Direct Access SCSI-5 device=20
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 238440MB (488327040 512 byte sectors: 255H 32S/T 59844C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
da4 at ciss0 bus 0 scbus0 target 4 lun 0
da4: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da4: 135.168MB/s transfers
da4: Command Queueing enabled
da4: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
da5 at ciss0 bus 0 scbus0 target 5 lun 0
da5: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da5: 135.168MB/s transfers
da5: Command Queueing enabled
da5: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
da6 at ciss0 bus 0 scbus0 target 6 lun 0
da6: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-5 device=20
da6: 135.168MB/s transfers
da6: Command Queueing enabled
da6: 953837MB (1953459632 512 byte sectors: 255H 32S/T 65535C)
sa0 at ciss1 bus 32 scbus3 target 3 lun 0
sa0: <HP Ultrium 3-SCSI Q24D> Removable Sequential Access SCSI-5 device=20
sa0: 135.168MB/s transfers
sa0: Command Queueing enabled
sa1 at mpt0 bus 0 scbus4 target 5 lun 0
sa1: <HP Ultrium 3-SCSI Q25W> Removable Sequential Access SCSI-5 device=20
sa1: 300.000MB/s transfers
sa1: Command Queueing enabled
cd0 at ata3 bus 0 scbus6 target 0 lun 0
cd0: <HL-DT-ST DVD-ROM DH10N DAE1> Removable CD-ROM SCSI-0 device=20
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
ch0 at mpt0 bus 0 scbus4 target 5 lun 1
ch0: <HP 1x8 G2 AUTOLDR 3.80> Removable Changer SCSI-5 device=20
ch0: 300.000MB/s transfers
ch0: Command Queueing enabled
SMP: AP CPU #3 Launched!
ch0: 8 slots, 1 drive, 1 picker, 0 portals
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 15625916 Hz quality 1000
GEOM: da3: the primary GPT table is corrupt or invalid.
GEOM: da3: using the secondary instead -- recovery strongly advised.
GEOM: da4: the primary GPT table is corrupt or invalid.
GEOM: da4: using the secondary instead -- recovery strongly advised.
GEOM: da5: the primary GPT table is corrupt or invalid.
GEOM: da5: using the secondary instead -- recovery strongly advised.
GEOM: da6: the primary GPT table is corrupt or invalid.
GEOM: da6: using the secondary instead -- recovery strongly advised.
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=3D0
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from zfs:rpool []...
ugen3.2: <EATON Powerware> at usbus3
=3D=3D dmesg =3D=3D
--=20
Erfahrung hei=DFt gar nichts. Man kann seine Sache auch 35 Jahre schlecht
machen. =20
-- Kurt Tucholsky
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201211182220.qAIMK1oY061509>