Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 24 Apr 2007 13:38:43 -0700 (PDT)
From:      L Goodwin <xrayv19@yahoo.com>
To:        freebsd-questions@freebsd.org
Subject:   Samba connection fails
Message-ID:  <299506.44768.qm@web58107.mail.re3.yahoo.com>

next in thread | raw e-mail | index | archive | help
I installed the samba-3.0.23c_2,1 package on a server destined for a small office network running Windows clients. Have not yet configured the network settings.
Am trying to test the Samba configuration "offline" before connecting it to the network (router connected to cable modem, clients connected to router via Cat-5e Ethernet).

Issues/Questions (see Samba configuration details at end of email):

1) "smbclient -L <hostname>" fails with "Connection to SERVER failed".
Get same error for "smbclient //SERVER/sambavol". What does this mean?

2) What value to assign "netbios name" in smb.conf?

3) What degree of network configuration is necessary for "smbclient -L <hostname>" to work?

4) How to verify that Samba3 package was installed successfully (other than lack of warnings/errors during install)?

SAMBA CONFIGURATION DETAILS:

1) Create smb.conf file in /usr/local/etc:

[global]
workgroup = office
netbios name = tbd (is this required, and how/where to get/set it?)
security = share

[sambavol]
path = /sambavol
browseable = yes
writeable = yes
printable = no

2) Add entry to start samba in /etc/rc.conf:
    samba_enable="YES"

3) Start Samba:
    /usr/local/etc/rc.d/samba start
(to stop samba: /usr/local/etc/rc.d/samba.sh stop)

Note: Need to keep the file server synced with Internet standard time (see NTPD(8) man page).

Tests:
--------------------------------------------------------------------------------------------------
1) Verify that smb.conf file is in the right directory (gets read):
    which smbd    # Get location of smbd
    (output: usr/local/sbin/smbd)
    cd /usr/local/sbin    # cd to the directory containing smbd!
    smbd -b | grep smb.conf    # Get location of smb.conf (verify path is correct)
    (output: CONFIGFILE: /usr/local/sbin/smb.conf)
RESULT: OK

2) Test Samba configuration file:
    cd /usr/local/etc
    testparm smb.conf
RESULT: OK

3) List shares available on server: 
    smbclient -L <hostname>
RESULT: FAIL ("Connection to SERVER failed")

Additional Samba Configuration Steps:
1) Uncommented the following lines in /etc/inetd.conf and rebooted:
    #netbios-ssn    stream    tcp    nowait    root    /usr/local/sbin/smbd    smbd
    #netbios-ns    dgram    udp    wait    root    /usr/local/sbin/nmbd    nmbd
On reboot, get these boot messages:
...
Removing stale Samba tdb files: ...... done
Starting nmbd.
Starting smbd.
Starting usbd.
...
RESULT: Still getting "Connection to SERVER failed".

       
---------------------------------
Ahhh...imagining that irresistible "new car" smell?
 Check outnew cars at Yahoo! Autos.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?299506.44768.qm>