Date: Mon, 1 Aug 2011 19:34:23 -0400 From: Brenden Blosser <bsbmusic@comcast.net> To: freebsd-wireless@freebsd.org Subject: Atheros AR9285 Message-ID: <38A316D5-449B-40D1-B47A-75EC9752AF06@comcast.net>
next in thread | raw e-mail | index | archive | help
Hi. I've been trying to figure this out for the longest time now. My =
laptop has a Atheros AR9285 wireless card in it currently but when I try =
to connect to my wireless network or run "ifconfig wlan0 up scan" I see =
in return:
ath0: hardware error; resetting
ath0: 0x00000000 0x00002000 0x00000000, 0x00000000 0x00000000 0x00000000
But it shows it's status as "associated" with my wireless network but =
there is no network access in anyway (Can't even ping 192.168.1.1).
I'm providing all informational outputs below:
uname -a:
FreeBSD oxygen.hsd1.md.comcast.net. 8.2-STABLE-201105 FreeBSD =
8.2-STABLE-201105 #0: Tue May 17 05:18:48 UTC 2011 =
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
ifconfig wlan0:
wlan0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu =
1500
ether 4c:0f:6e:33:d8:93
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
ssid NETWORK-HERE channel 6 (2437 MHz 11g) bssid =
c0:c1:c0:75:31:22
regdomain 96 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF TKIP 2:128-bit txpower 20 bmiss 7 scanvalid 450 =
bgscan
bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode =
CTS
wme burst roaming MANUAL
pciconf -lv:
ath0@pci0:2:0:0: class=3D0x028000 card=3D0x3040103c =
chip=3D0x002b168c rev=3D0x01 hdr=3D0x00
vendor =3D 'Atheros Communications Inc.'
device =3D 'Atheros AR9285 Wireless LAN 802.11 a/b/g/n =
Controller (AR928x)'
class =3D network
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38A316D5-449B-40D1-B47A-75EC9752AF06>