Date: Sat, 27 Oct 2001 10:46:57 -0300 From: Noel Balansag <pongkee@fibertel.com.ar> To: questions@FreeBSD.org Subject: how do i run X version 4.1 ? Message-ID: <3BDABAD1.D562B0AB@fibertel.com.ar>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------F96ED3BA71E742DF293C2E46 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit hi. i installed xfree 3.3.6 during system installation, then i tried to upgrade it by installing xfree4.1 via the ports collection, but when i try to run x, log shows that version 3.3.6 is running. How do i make x to run version 4.1? I included the log just in case. Also, how do i install xwrapper? It does not appear on the ports collection list when I do /stand/sysinstall. By the way, am running FreeBSD 4.4-Release. tia. --------------F96ED3BA71E742DF293C2E46 Content-Type: text/plain; charset=us-ascii; name="mgaerrx" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="mgaerrx" Script started on Sat Oct 27 10:38:41 2001 host# startx xauth: (argv):1: bad display name "host.fibertel.com.ar:0" in "list" command xauth: (argv):1: bad display name "host.fibertel.com.ar:0" in "add" command XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: xx November 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.4-RELEASE i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1), GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Using syscons driver with X support (version 2.0) (using VT number 9) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) SVGA: PCI: S3 Trio3D/2X rev 2, Memory @ 0xe0000000 (--) SVGA: S3V: Trio3D/2X rev 2, Linear FB @ 0xe0000000 (--) SVGA: Detected S3 Trio3D/2X (--) SVGA: using driver for chipset "s3_virge" (--) SVGA: videoram: 4096k (plus 4096k off-screen) (--) SVGA: Ramdac speed: 230 MHz (135 MHz for 24 bpp) (--) SVGA: Detected current MCLK value of 95.455 MHz (--) SVGA: chipset: s3_virge (--) SVGA: videoram: 4096k (**) SVGA: Using 24 bpp, Depth 24, Color weight: 888 (--) SVGA: Maximum allowed dot-clock: 135.000 MHz (**) SVGA: Mode "1024x768": mode clock = 85.000 (**) SVGA: Mode "800x600": mode clock = 69.650 (--) SVGA: Virtual resolution set to 1024x768 (--) SVGA: s3_virge: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 pattern fill (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 8 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and non-transparent stipples (--) SVGA: XAA: Horizontal and vertical lines and segments SESSION_MANAGER=local/host.fibertel.com.ar:/tmp/.ICE-unix/331 xscreensaver-command: not found SetKbdSettings - type: 0 rate: 30 delay: 500 snumlk: 0 SetKbdSettings - Succeeded xscreensaver: not found esd: Esound sound daemon already running or stale UNIX socket /root/.esd/socket This socket already exists indicating esd is already running. Exiting... ** WARNING **: Host name lookup failure on localhost. Gtk-WARNING **: gtk_signal_disconnect_by_data(): could not find handler containing data (0x815D4A0) Gtk-WARNING **: gtk_signal_disconnect_by_data(): could not find handler containing data (0x815D4C0) waiting for X server to shut down xauth: (argv):1: bad display name "host.fibertel.com.ar:0" in "remove" command host# exit exit Script done on Sat Oct 27 10:39:34 2001 --------------F96ED3BA71E742DF293C2E46-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BDABAD1.D562B0AB>