Date: Sun, 27 Jan 2002 23:02:32 +0200 From: Vladimir Tchoukharev <chu@gpi.ru> To: FreeBSD-gnats-submit@freebsd.org Subject: i386/34352: USB joystick causes panic on boot Message-ID: <3C546AE8.C6EAEE60@gpi.ru> References: <200201271735.g0RHZlT48919@h33.erkki.ton.tut.fi>
next in thread | previous in thread | raw e-mail | index | archive | help
>Number: 34352 >Category: i386 >Synopsis: USB joystick makes panic on boot >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Sun Jan 27 13:10:01 PST 2002 >Closed-Date: >Last-Modified: >Originator: Vladimir Chukharev >Release: FreeBSD 4.4-STABLE i386 >Organization: >Environment: System: FreeBSD svak.h33.erkki.ton.tut.fi 4.4-STABLE FreeBSD 4.4-STABLE #1: Sat Dec 29 01:26:24 EET 2001 root@svak.h33.erkki.ton.tut.fi:/usr/src/sys/compile/H33 i386 >Description: I have a multi-OS box. Recently I get a Logitec WingMan Extrem Digital 3D joystick. It has a USB connector (actually with game/USB adaptor, but I do use the adaptor always). If this joystick is connected to the computer, FreeBSD cannot be booted, it panics with trap 12 while detecting the USB devices, then tries to reboot again. OK, here goes my dmesg whithout joystick connected. --------------- Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #1: Sat Dec 29 01:26:24 EET 2001 root@svak.h33.erkki.ton.tut.fi:/usr/src/sys/compile/H33 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (869.61-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (262080K bytes) avail memory = 257556480 (251520K bytes) Preloaded elf kernel "kernel" at 0xc0388000. VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc031b002 (1000022) VESA: NVidia netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdd50 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0 pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 chip2: <VIA 82C686 AC97 Modem> port 0xe800-0xe8ff irq 11 at device 7.6 on pci0 rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xde000000-0xde0000ff irq 11 at device 10.0 on pci0 rl0: Ethernet address: 00:40:f4:24:d1:e9 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xc0000-0xca7ff,0xd0000-0xd7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sbc0: <SoundBlaster Pro> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 pcm2: <SB DSP 3.02> on sbc0 pca0 at port 0x40 on isa0 IPFW: MOD_LOAD IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master tagged UDMA100 acd0: DVD-ROM <HITACHI DVD-ROM GD-8000> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s3a --------------- And now I will try to reproduce what I have written down from the screen. It was right after the last line with uhub0 in it (replacing everything starting from "uhci1:") --------------- ugen0: Logitec Inc. product 0x207, rev 1.00/1.04 addr 2, iclass 3/0 uhid0: no report descriptor device_probe_and_attach: uhid0 attach return 6 ugen0: Logitec Inc. product 0x207, rev 1.00/1.04 addr 2 ugen0: setting configuration index 0 failed device_probe_and_attach: ugen0 attach return 6 uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device 7.3 on p0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 Fatal trap 12: page fault while in kernel mode fault virtual address = 0x64003a fault code = supervisor read, page not present instruction pointer = 0x8:0xc0152b0a stack pointer = 0x10:0xc03aa9a4 frame pointer = 0x10:0xc03aa9b8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam trap number = 12 panic: page fault Uptime: 0s Automatic reboot in 15 seconds - press a key on the console to abort --------------- Mistypings are probable, sorry :( >How-To-Repeat: >Fix: Workaround: disconnect the joystick. Best regards, Vladimir Chukharev >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C546AE8.C6EAEE60>