Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Jan 2005 12:06:28 +0800
From:      "Rene C. Mendoza" <rene.mendoza@activeinvitesoftware.com>
To:        Gable Barber <gablebarber@gmail.com>
Cc:        questions@freebsd.org
Subject:   Re: Onboard sound problem - FBSD 5.2.1 - Epox 8kta3
Message-ID:  <41E350C4.4010609@activeinvitesoftware.com>
In-Reply-To: <aab166ce050110175170691b5c@mail.gmail.com>
References:  <aab166ce050110175170691b5c@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Have you added this line to your kernel config?

device pcm

I think you need this line to enable sound.


Gable Barber wrote:

>I recompiled kernel to include' options PNPBIOS '  ... per the Handbook. 
>
>>From the motherboard manual:
>
>Epox 8kta3 motherboard
>VIA kt133a 
>built in AC97 (by vt82c686b) 
>
>output of uname :
>
>bash-2.05b$ uname -a
>FreeBSD home.localdomain 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Sun
>Jan  9 09:07:26 CST 2005     gable@home.localdomain
>:/usr/src/sys/i386/compile/MYKERNEL  i386
>bash-2.05b$
>
>
>
>output of dmesg :
>
>bash-2.05b$ dmesg
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD 5.2.1-RELEASE #0: Sun Jan  9 09:07:26 CST 2005
>    gable@home.localdomain :/usr/src/sys/i386/compile/MYKERNEL
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: AMD Athlon(tm) processor (1403.19-MHz 686-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
>  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
>real memory  = 872349696 (831 MB)
>avail memory = 837726208 (798 MB)
>Pentium Pro MTRR support enabled
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <VIA694 AWRDACPI> on motherboard
>pcibios: BIOS version 2.10
>Using $PIR table, 9 entries at 0xc00fde40
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port
>0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on
>acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib0: slot 7 INTD is routed to irq 11
>pcib0: slot 7 INTD is routed to irq 11
>pcib0: slot 7 INTC is routed to irq 12
>pcib0: slot 13 INTA is routed to irq 11
>agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
>0xd0000000-0xd7ffffff at device 0.0 on pci0
>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pcib0: slot 1 INTA is routed to irq 10
>pcib1: slot 0 INTA is routed to irq 10
>pci1: <display, VGA> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device
>7.1 on pci0
>atapci0: Correcting VIA config for southbridge data corruption bug
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device
>7.2 on pci0
>usb0: <VIA 83C572 USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>ums0: Kensington Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00, addr
>2, iclass 3/1
>ums0: 3 buttons and Z dir.
>uhub1: ORTEK ORTEK KH12 USB Hub, class 9/0, rev 1.10/3.00, addr 3
>uhub1: 3 ports with 2 removable, bus powered
>ukbd0: ORTEK USB Hub/Keyboard, rev 1.10/3.00, addr 4, iclass 3/1
>kbd0 at ukbd0
>uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device
>7.3 on pci0
>usb1: <VIA 83C572 USB controller> on uhci1
>usb1: USB revision 1.0
>uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
>pci0: <multimedia, audio> at device 7.5 (no driver attached)
>dc0: <ADMtek AN985 10/100BaseTX> port 0xe800-0xe8ff mem
>0xe9000000-0xe90003ff irq 11 at device 13.0 on pci0
>dc0: Ethernet address: 00:04:5a:7d:96:c5
>miibus0: <MII bus> on dc0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
>0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 16550A
>sio1 port 0x2f8-0x2ff irq 3 on acpi0
>sio1: type 16550A
>ppc0 port 0x378-0x37f irq 7 on acpi0
>ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
>pmtimer0 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounter "TSC" frequency 1403191078 Hz quality 800
>Timecounters tick every 10.000 msec
>acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
>GEOM: create disk ad1 dp=0xc6520e60
>ad1: 39266MB <IC35L040AVVN07-0> [79780/16/63] at ata0-slave UDMA100
>acd0: CDROM <FX120T> at ata1-master PIO3
>Mounting root from ufs:/dev/ad1s1a
>drm0: <3dfx Voodoo5> port 0xc000-0xc0ff mem
>0xd8000000-0xdfffffff,0xe0000000-0xe3ffffff irq 10 at device 0.0 on
>pci1
>info: [drm] Initialized tdfx 1.0.0 20010216 on minor 0
>bash-2.05b$
>
>
>
>Is this the important part...?
>
>pci0: <multimedia, audio> at device 7.5 (no driver attached)
>
>Any help is greatly appreciated....
>
>Thank you,
>Gable Barber
>_______________________________________________
>freebsd-questions@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>  
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41E350C4.4010609>