Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 25 Sep 2006 19:12:30 +0100
From:      Christopher J Phillips <SysAdmin@Rainbow-IT.net>
To:        FreeBSD ACPI <FreeBSD-ACPI@FreeBSD.org>
Subject:   Re: ACPI causing problems on acer Aspire 7100 series laptop
Message-ID:  <45181C0E.2040501@Rainbow-IT.net>
In-Reply-To: <44F8D836.2040608@Rainbow-IT.net>
References:  <44F8D836.2040608@Rainbow-IT.net>

next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello again,

I've not been able to come up with anything that might make things
better for my system, though I did wonder...

Does anyone think I might be able to use some more specific entries in
/boot/loader.conf that would enable me to have at least some ACPI
functionality?

Or, is there anything that you can suggest I can do to help myself out
toward a more stable/functional ACPI system?

Kind Regards,
- --

ChrisP


Christopher J Phillips wrote:
> Hi FreeBSD-ACPI,
> 
> I hope I'm OK to mail you with this.  I'm reading
> http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html
> and it looks like section 11.16.4 applies to me, but I'd like some
> confirmation/direction from those in the know.
> 
> I'll be trying to find out more about the problem and maybe fix it, but
> here's what I've got so far (as per section 11.16.1): -
> 
> I'm unsure of my BIOS level...
> 
> 
> o     Description of the buggy behavior
> 
> This is a brand new laptop, backed up the Windoze OS and is now running
> FreeBSD 6.1 STABLE
> 
> # uname -a
> FreeBSD Hathor.HQ.Rainbow-IT.net 6.1-STABLE FreeBSD 6.1-STABLE #3: Sun
> Aug 27 13:59:44 BST 2006
> chrisp@hathor.hq.rainbow-it.net:/usr/src/sys/i386/compile/HATHOR  i386
> 
> The ACPI problem was apparent immediately after install.
> 
> The boot screen is flooded with messages like this: -
> 
> Sep  1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for
> [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731580),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-0239: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731580),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for
> [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731680),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731540),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-0501: *** Error: Handler for
> [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc57316a0),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:14 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731560),
> AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:53 Hathor kernel: ACPI-0501: *** Error: Handler for
> [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
> Sep  1 11:52:53 Hathor kernel: ACPI-1304: *** Error: Method execution
> failed [\_TZ_.TZS0._TMP] (Node 0xc572d100), AE_NO_HARDWARE_RESPONSE
> 
> and these messages continue after boot and I am not able to log in and I
> do not get a prompt and can not switch to another vtty, so have to cycle
> the power and boot up with ACPI disabled.
> 
> I have temporarily added the following line to /boot/loader.conf: -
> 
> hint.acpi.0.disabled="1"
> 
> Instead of that I would prefer to spend some time learning how to
> diagnose my problems and if at all possible, help the FreeBSD community
> fix them...
> 
> 
> o     The dmesg(8) output after boot -v
> 
> I have had to grab this stuff from /var/log/messages as there appears to
> be too many messages and I think they're pushing the first ones out of
> the dmesg buffer, before they can be recorded in /var/run/dmesg.boot.
> Even when grabbing the stuff directly from the messages log itself, I
> don't see the California bit anywhere, when I've booted up wth ACPI enabled.
> 
> Sep  2 00:41:27 Hathor syslogd: kernel boot file is /boot/kernel/kernel
> intpin 20 (PCI IRQ 20) to vector 54
> rl0: [MPSAFE]
> cbb0:  mem 0xb8003000-0xb8003fff irq 22 at device 9.0 on pci6
> cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb8003000
> cardbus0:  on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> ioapic0: routing intpin 22 (PCI IRQ 22) to vector 55
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
> 0x00: 0x14101524 0x02100107 0x06070001 0x00025108
> 0x10: 0xb8003000 0x020000a0 0x24070706 0xfffff000
> 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
> 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440116
> 0x40: 0x01001025 0x00000001 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x08405021 0x00000000 0x00000000 0x00001022
> 0x90: 0x604402c0 0x00000000 0x00000000 0x00000000
> 0xa0: 0xfe010001 0x00c00000 0x00008000 0x0000001f
> 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00001000 0x00800080 0x06080600 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> isab0:  at device 31.0 on pci0
> isa0:  on isab0
> atapci0:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at
> device 31.2 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
> atapci0: failed to enable memory mapping!
> ata0:  on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=10
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=50 stat1=10 devices=0x9
> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56
> ata0: [MPSAFE]
> ata1:  on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> Sep  2 00:41:27 Hathor last message repeated 21 times
> ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata1: reset tp2 stat0=ff stat1=ff devices=0x0
> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57
> ata1: [MPSAFE]
> pci0:  at device 31.3 (no driver attached)
> acpi_tz0:  on acpi0
> acpi_tz1:  on acpi0
> atkbdc0:  port 0x60,0x64 irq 1 on acpi0
> atkbd0:  irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> psmcpnp0:  irq 12 on acpi0
> psm0: current command byte:0047
> psm0:  irq 12 on atkbdc0
> ioapic0: routing intpin 12 (ISA IRQ 12) to vector 59
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> battery0:  on acpi0
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_acad0:  on acpi0
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> vt: vt0 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> orm0:  at iomem 0xcf800-0xd07ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
> vt0:  at port 0x3b0-0x3df iomem 0-0x7fff on isa0
> vt0: generic VGA, 80 columns, color, 8 screens, unknown keyboard
> sc0:  at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
> vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0 failed to probe at irq 7 on isa0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01
> sio0: probe failed test(s): 0 1 2 4 6 7 9
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> ioapic0: routing intpin 4 (ISA IRQ 4) to vector 60
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x4e01 0x4e01 0x4e01 0x4e01
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> isa_probe_children: probing PnP devices
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
> ums0: 8 buttons and Z dir.
> uaudio0: Logitech Logitech USB Headset, rev 1.10/10.13, addr 3
> uaudio0: ignored input endpoint of type adaptive
> uaudio0: audio rev 1.00
> uaudio0: 6 mixer controls
> pcm0:  on uaudio0
> pcm0: using a default buffer size of 16384
> uaudio0: uaudio_query_formats: found a native playback channel (stereo)
> fixed frequency (5 listed formats) 16bit 2bytes/subframe X 2 channels =
> 4 bytes per sample
> uaudio0: uaudio_query_formats: found a native playback channel (mono)
> fixed frequency (5 listed formats) 16bit 2bytes/subframe X 1 channels =
> 2 bytes per sample
> uaudio0: play buf 0xc58fc000
> Device configuration finished.
> Reducing kern.maxvnodes 101579 -> 100000
> procfs registered
> lapic: Divisor 2, Frequency 49879903 hz
> Timecounter "TSC" frequency 1496402665 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> battery0: battery initialization start
> acpi_acad0: acline initialization start
> ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 76319MB  at ata0-master UDMA100
> ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
> GEOM: new disk ad0
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node
> 0xc572d0e0), AE_NO_HARDWARE_RESPONSE
> acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ad0: Intel check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> acd0:  DVDR drive at ata0 as slave
> acd0: read 8115KB/s (8115KB/s) write 172KB/s, 2048KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: 120mm data disc
> ATA PseudoRAID loaded
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.ADP1._PSR] (Node 0xc57314a0), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node
> 0xc572d0e0), AE_NO_HARDWARE_RESPONSE
> acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed [\_TZ_.TZS0._TMP] (Node
> 0xc572d0e0), AE_NO_HARDWARE_RESPONSE
> acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBIF] (Node 0xc5731680), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BIF] (Node 0xc5731540), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE
> Linux ELF exec handler installed
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> ACPI-0239: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._STA] (Node 0xc5731560), AE_NO_HARDWARE_RESPONSE
> acpi_ec0: EcRead: Failed waiting for EC to send data.
> ACPI-0501: *** Error: Handler for [EmbeddedControl] returned
> AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.GBST] (Node 0xc5731660), AE_NO_HARDWARE_RESPONSE
> ACPI-1304: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.EC0_.BAT0._BST] (Node 0xc5731520), AE_NO_HARDWARE_RESPONSE
> battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE
> Sep  2 00:41:31 Hathor ntpd[575]: ntpd 4.2.0-a Thu Aug 17 15:27:48 BST
> 2006 (1)
> splash: image decoder found: warp_saver
> 
> 
> o     The dmesg(8) output from boot -v with ACPI disabled
> 
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-STABLE #3: Sun Aug 27 13:59:44 BST 2006
>     chrisp@hathor.hq.rainbow-it.net:/usr/src/sys/i386/compile/HATHOR
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0910000.
> Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0910220.
> Preloaded splash_image_data "/boot/modules/oemlogo.bmp" at 0xc09102d0.
> Preloaded elf module "/boot/kernel/snd_uaudio.ko" at 0xc0910328.
> Preloaded elf module "/boot/kernel/sound.ko" at 0xc09103d8.
> Preloaded elf module "/boot/modules/bcmwl5_sys.ko" at 0xc0910484.
> Preloaded elf module "/boot/kernel/ndis.ko" at 0xc0910534.
> Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc09105e0.
> APIC: Could not find any APICs.
> Calibrating clock(s) ... i8254 clock: 1193214 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 1496404354 Hz
> CPU: Intel(R) Celeron(R) M processor         1.50GHz (1496.40-MHz
> 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
>   Features=0xafe9fbff
>   AMD Features=0x100000
> real memory  = 1600651264 (1526 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x000000005db65fff, 1559498752 bytes (380737 pages)
> avail memory = 1559384064 (1487 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f7990
> bios32: Entry = 0xfd4b0 (c00fd4b0)  Rev = 0  Len = 1
> pcibios: PCI BIOS entry at 0xfd4b0+0x25e
> pnpbios: Found PnP BIOS data at 0xc00f7a10
> pnpbios: Entry = f0000:c07f  Rev = 1.0
> Other BIOS signatures found:
> wlan: <802.11 Link Layer>
> ath_rate: version 1.2
> mem:
> Pentium Pro MTRR support enabled
> nfslock: pseudo-device
> null:
> io:
> random:
> VESA: information block
> 56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
> 00 01 7b 00 00 01 3d 01 00 01 4f 01 00 01 7d 01
> 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> VESA: 15 mode(s) found
> VESA: v3.0, 7872k memory, flags:0x1, mode table:0xc07a5940 (1000040)
> VESA: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
> VESA: Intel Corporation Intel(r)915GM/910ML/915MS Graphics Controller
> Hardware Version 0.0
> kbd: new array size 4
> kbd1 at kbdmux0
> splash: image@0xc084a2e4, size:61614
> splash_bmp: beyond screen capacity (180x114, 16777216 colors)
> splash_bmp: beyond screen capacity (180x114, 16777216 colors)
> splash_bmp: beyond screen capacity (180x114, 16777216 colors)
> splash_bmp: beyond screen capacity (180x114, 16777216 colors)
> splash_bmp: beyond screen capacity (180x114, 16777216 colors)
> splash_bmp: No appropriate video mode found
> bmp_start(): splash_mode:-1
> module_register_init: MOD_LOAD (splash_bmp, 0xc08479e4, 0) error 19
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa20
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25908086)
> pcibios: BIOS version 2.10
> pcib0:  pcibus 0 on motherboard
> pci0:  on pcib0
> pci0: physical bus=0
> found->	vendor=0x8086, dev=0x2590, revid=0x03
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x8086, dev=0x2592, revid=0x03
> 	bus=0, slot=2, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 1, range 32, base b0080000, size 19, enabled
> 	map[14]: type 4, range 32, base 00001800, size  3, enabled
> 	map[18]: type 3, range 32, base c0000000, size 28, enabled
> 	map[1c]: type 1, range 32, base b0040000, size 18, enabled
> found->	vendor=0x8086, dev=0x2792, revid=0x03
> 	bus=0, slot=2, func=1
> 	class=03-80-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 1, range 32, base 00000000, size 19, memory disabled
> found->	vendor=0x8086, dev=0x2668, revid=0x03
> 	bus=0, slot=27, func=0
> 	class=04-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D3  current D0
> 	MSI supports 1 message, 64 bit
> 	map[10]: type 1, range 64, base b0000000, size 14, enabled
> found->	vendor=0x8086, dev=0x2660, revid=0x03
> 	bus=0, slot=28, func=0
> 	class=06-04-00, hdrtype=0x01, mfdev=1
> 	cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> found->	vendor=0x8086, dev=0x2658, revid=0x03
> 	bus=0, slot=29, func=0
> 	class=0c-03-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> 	map[20]: type 4, range 32, base 00001820, size  5, enabled
> found->	vendor=0x8086, dev=0x2659, revid=0x03
> 	bus=0, slot=29, func=1
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=b, irq=11
> 	map[20]: type 4, range 32, base 00001840, size  5, enabled
> found->	vendor=0x8086, dev=0x265a, revid=0x03
> 	bus=0, slot=29, func=2
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=c, irq=11
> 	map[20]: type 4, range 32, base 00001860, size  5, enabled
> found->	vendor=0x8086, dev=0x265b, revid=0x03
> 	bus=0, slot=29, func=3
> 	class=0c-03-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=d, irq=11
> 	map[20]: type 4, range 32, base 00001880, size  5, enabled
> found->	vendor=0x8086, dev=0x265c, revid=0x03
> 	bus=0, slot=29, func=7
> 	class=0c-03-20, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 1, range 32, base b0004000, size 10, enabled
> found->	vendor=0x8086, dev=0x2448, revid=0xd3
> 	bus=0, slot=30, func=0
> 	class=06-04-01, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x8086, dev=0x2641, revid=0x03
> 	bus=0, slot=31, func=0
> 	class=06-01-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x8086, dev=0x2653, revid=0x03
> 	bus=0, slot=31, func=2
> 	class=01-01-80, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=b, irq=255
> 	powerspec 2  supports D0 D3  current D0
> 	map[20]: type 4, range 32, base 00001810, size  4, enabled
> found->	vendor=0x8086, dev=0x266a, revid=0x03
> 	bus=0, slot=31, func=3
> 	class=0c-05-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=b, irq=11
> 	map[20]: type 4, range 32, base 000018c0, size  5, enabled
> agp0:  port 0x1800-0x1807 mem
> 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0040000-0xb007ffff irq 10
> at device 2.0 on pci0
> agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000
> agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xb0080000
> agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xb0040000
> agp0: detected 7932k stolen memory
> agp0: aperture size is 256M
> pci0:  at device 2.1 (no driver attached)
> pci0:  at device 27.0 (no driver attached)
> pcib1:  irq 11 at device 28.0 on pci0
> pcib1:   secondary bus     2
> pcib1:   subordinate bus   2
> pcib1:   I/O decode        0x2000-0x2fff
> pcib1:   memory decode     0xb4000000-0xb7ffffff
> pcib1:   prefetched decode 0xd0000000-0xd3ffffff
> pci2:  on pcib1
> pci2: physical bus=2
> uhci0:  port 0x1820-0x183f irq 11 at device 29.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
> uhci0: [GIANT-LOCKED]
> usb0:  on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1:  port 0x1840-0x185f irq 11 at device 29.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
> uhci1: [GIANT-LOCKED]
> usb1:  on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2:  port 0x1860-0x187f irq 11 at device 29.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
> uhci2: [GIANT-LOCKED]
> usb2:  on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3:  port 0x1880-0x189f irq 11 at device 29.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
> uhci3: [GIANT-LOCKED]
> usb3:  on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0:  mem 0xb0004000-0xb00043ff irq 11 at device 29.7 on pci0
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xb0004000
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4:  on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib2:  at device 30.0 on pci0
> pcib2:   secondary bus     6
> pcib2:   subordinate bus   7
> pcib2:   I/O decode        0x3000-0x3fff
> pcib2:   memory decode     0xb8000000-0xb80fffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pcib2:   Subtractively decoded bridge.
> pci6:  on pcib2
> pci6: physical bus=6
> found->	vendor=0x14e4, dev=0x4318, revid=0x02
> 	bus=6, slot=5, func=0
> 	class=02-80-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0102, statreg=0x0000, cachelnsz=0 (dwords)
> 	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=10
> 	map[10]: type 1, range 32, base b8000000, size 13, enabled
> pcib2: (null) requested memory range 0xb8000000-0xb8001fff: good
> found->	vendor=0x10ec, dev=0x8139, revid=0x10
> 	bus=6, slot=7, func=0
> 	class=02-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
> 	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 4, range 32, base 00003000, size  8, enabled
> pcib2: (null) requested I/O range 0x3000-0x30ff: in range
> 	map[14]: type 1, range 32, base b8002000, size  8, enabled
> pcib2: (null) requested memory range 0xb8002000-0xb80020ff: good
> found->	vendor=0x1524, dev=0x1410, revid=0x01
> 	bus=6, slot=9, func=0
> 	class=06-07-00, hdrtype=0x02, mfdev=0
> 	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x51 (2430 ns), mingnt=0xc4 (49000 ns), maxlat=0x07 (1750 ns)
> 	intpin=a, irq=10
> 	powerspec 1  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base b8003000, size 12, enabled
> pcib2: (null) requested memory range 0xb8003000-0xb8003fff: good
> ndis0:  mem 0xb8000000-0xb8001fff irq 10 at device 5.0 on pci6
> ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xb8000000
> ndis0: [MPSAFE]
> ndis0: NDIS API version: 5.1
> ndis0: bpf attached
> ndis0: Ethernet address: 00:16:ce:2c:6f:11
> ndis0: bpf attached
> rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
> pcib2: rl0 requested I/O range 0x3000-0x30ff: in range
> rl0:  port 0x3000-0x30ff mem 0xb8002000-0xb80020ff irq 10 at device 7.0
> on pci6
> pcib2: rl0 requested I/O range 0x3000-0x30ff: in range
> miibus0:  on rl0
> rlphy0:  on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: bpf attached
> rl0: Ethernet address: 00:0a:e4:f9:c7:85
> rl0: [MPSAFE]
> cbb0:  mem 0xb8003000-0xb8003fff irq 10 at device 9.0 on pci6
> cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb8003000
> cardbus0:  on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
>   0x00: 0x14101524 0x02100107 0x06070001 0x00025108
>   0x10: 0xb8003000 0x020000a0 0x24070706 0xfffff000
>   0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
>   0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010a
>   0x40: 0x01001025 0x00000001 0x00000000 0x00000000
>   0x50: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x60: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x70: 0x00000000 0x00000000 0x00000000 0x00000000
>   0x80: 0x08405021 0x00000000 0x00000000 0x00001022
>   0x90: 0x604402c0 0x00000000 0x00000000 0x00000000
>   0xa0: 0xfe010001 0x00c00000 0x00008000 0x0000001f
>   0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xc0: 0x00001000 0x00800080 0x06080600 0x00000000
>   0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
>   0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> isab0:  at device 31.0 on pci0
> isa0:  on isab0
> atapci0:  port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at
> device 31.2 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
> atapci0: failed to enable memory mapping!
> ata0:  on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=10
> ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=50 stat1=10 devices=0x9
> ata0: [MPSAFE]
> ata1:  on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata1: reset tp2 stat0=ff stat1=ff devices=0x0
> ata1: [MPSAFE]
> pci0:  at device 31.3 (no driver attached)
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 16 devices, largest 290 bytes
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1
> PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1
> PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1
> PNP0c02: adding fixed memory32 range 0xfec10000-0xfec17fff, size=0x8000
> PNP0c02: adding fixed memory32 range 0xfec18000-0xfec1ffff, size=0x8000
> PNP0c02: adding fixed memory32 range 0xfec20000-0xfec27fff, size=0x8000
> PNP0c02: adding fixed memory32 range 0xfec28000-0xfec2ffff, size=0x8000
> PNP0c02: adding fixed memory32 range 0xfed00000-0xfed033ff, size=0x3400
> PNP0c02: adding fixed memory32 range 0xfed20000-0xfed8ffff, size=0x70000
> PNP0c02: adding fixed memory32 range 0xf0008000-0xf000bfff, size=0x4000
> pnpbios: handle 0 device ID PNP0c02 (020cd041)
> PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
> PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
> PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
> PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
> PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
> PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
> PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1
> PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
> PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
> PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
> PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1
> PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1
> PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
> PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1
> PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
> PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
> PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
> PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
> PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
> PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
> PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
> PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
> PNP0c02: adding io range 0x1200-0x1200, size=0x1, align=0x1
> PNP0c02: adding io range 0x1204-0x1204, size=0x1, align=0x1
> PNP0c02: adding fixed memory32 range 0xe0000000-0xefffffff, size=0x10000000
> PNP0c02: adding fixed memory32 range 0xf0000000-0xf0003fff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xf0004000-0xf0004fff, size=0x1000
> PNP0c02: adding fixed memory32 range 0xf0005000-0xf0005fff, size=0x1000
> pnpbios: handle 1 device ID PNP0c02 (020cd041)
> PNP0c01: adding fixed memory32 range 0xe8000-0xfffff, size=0x18000
> PNP0c01: adding fixed memory32 range 0x100000-0x5f6fffff, size=0x5f600000
> pnpbios: handle 2 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> pnpbios: handle 3 device ID PNP0200 (0002d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 0x1
> pnpbios: handle 5 device ID PNP0100 (0001d041)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> pnpbios: handle 6 device ID PNP0b00 (000bd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 0x2
> pnpbios: handle 7 device ID PNP0303 (0303d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> pnpbios: handle 8 device ID PNP0c04 (040cd041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> pnpbios: handle 9 device ID PNP0800 (0008d041)
> PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> pnpbios: handle 11 device ID PNP0a03 (030ad041)
> INT0800: adding fixed memory32 range 0xff000000-0xffffffff, size=0x1000000
> pnpbios: handle 12 device ID INT0800 (0008d425)
> PNP0c02: adding fixed memory32 range 0xcf200-0xcf7ff, size=0x600
> PNP0c02: adding fixed memory32 range 0xd0800-0xd3fff, size=0x3800
> pnpbios: handle 13 device ID PNP0c02 (020cd041)
> PNP0c02: adding memory32 range 0xe0000-0xe17ff, size=0x1800, align=0x1800
> pnpbios: handle 14 device ID PNP0c02 (020cd041)
> PNP0f13: adding irq mask 0x1000
> pnpbios: handle 15 device ID PNP0f13 (130fd041)
> vt: vt0 already exists; skipping it
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> orm0:  at iomem 0xcf800-0xd07ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> atkbdc0:  at port 0x60,0x64 on isa0
> atkbd0:  irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0:  irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0 failed to probe at irq 7 on isa0
> sc0:  at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: irq maps: 0x801 0x801 0x801 0x801
> sio0: probe failed test(s): 0 1 2 4 6 7 9
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x801 0x801 0x801 0x801
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0:  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown:  can't assign resources (port)
> unknown:  at port 0x60 on isa0
> unknown:  failed to probe at port 0x61 on isa0
> unknown:  can't assign resources (memory)
> unknown:  at iomem 0xdc000-0xdffff on isa0
> unknown:  can't assign resources (memory)
> unknown:  on isa0
> unknown:  can't assign resources (memory)
> unknown:  at iomem 0xe0000-0xe17ff on isa0
> unknown:  can't assign resources (irq)
> unknown:  at irq 12 on isa0
> ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
> ums0: 8 buttons and Z dir.
> uaudio0: Logitech Logitech USB Headset, rev 1.10/10.13, addr 3
> uaudio0: ignored input endpoint of type adaptive
> uaudio0: audio rev 1.00
> uaudio0: 6 mixer controls
> pcm0:  on uaudio0
> pcm0: using a default buffer size of 16384
> uaudio0: uaudio_query_formats: found a native playback channel (stereo)
> fixed frequency (5 listed formats) 16bit 2bytes/subframe X 2 channels =
> 4 bytes per sample
> uaudio0: uaudio_query_formats: found a native playback channel (mono)
> fixed frequency (5 listed formats) 16bit 2bytes/subframe X 1 channels =
> 2 bytes per sample
> uaudio0: play buf 0xc5857000
> Device configuration finished.
> Reducing kern.maxvnodes 101579 -> 100000
> procfs registered
> Timecounter "TSC" frequency 1496404354 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 76319MB  at ata0-master UDMA100
> ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
> GEOM: new disk ad0
> ad0: Intel check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> acd0:  DVDR drive at ata0 as slave
> acd0: read 8115KB/s (8115KB/s) write 172KB/s, 2048KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: 120mm data disc
> ATA PseudoRAID loaded
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
> Linux ELF exec handler installed
> 
> 
> o     Output from sysctl hw.acpi
> 
> # sysctl hw.acpi
> sysctl: unknown oid 'hw.acpi'
> 
> 
> o     URL where my ASL can be found
> 
> http://rainbow-it.net/chrisp-acerAspire7103WSMi.asl
> 
> 
> o     Additionally, I've attempted to re-compile my ASL - output below
> 
> # iasl chrisp-acerAspire7103WSMi.asl
> 
> Intel ACPI Component Architecture
> ASL Optimizing Compiler / AML Disassembler version 20041119 [Aug 17 2006]
> Copyright (C) 2000 - 2004 Intel Corporation
> Supports ACPI Specification Revision 2.0c
> 
> chrisp-acerAspire7103WSMi.asl   504:     Method (_WAK, 1, NotSerialized)
> Warning  2026 - Reserved method must return a value ^  (_WAK)
> 
> chrisp-acerAspire7103WSMi.asl   929:             Name (_HID, "*pnp0c14")
> Error    1068 -                  String must be entirely alphanumeric ^
>  (*pnp0c14)
> 
> chrisp-acerAspire7103WSMi.asl   946:             Name (_WDG, Buffer (0xDC)
> Warning  2033 -                     Unknown reserved name ^  (_WDG)
> 
> chrisp-acerAspire7103WSMi.asl   977:             Method (_WED, 1,
> NotSerialized)
> Warning  2019 -        Not all control paths return a value ^  (_WED)
> 
> chrisp-acerAspire7103WSMi.asl   977:             Method (_WED, 1,
> NotSerialized)
> Warning  2033 -                       Unknown reserved name ^  (_WED)
> 
> chrisp-acerAspire7103WSMi.asl  1267:             Method (WMCA, 3,
> NotSerialized)
> Warning  2019 -        Not all control paths return a value ^  (WMCA)
> 
> chrisp-acerAspire7103WSMi.asl  1369:             Method (WMCB, 3,
> NotSerialized)
> Warning  2019 -        Not all control paths return a value ^  (WMCB)
> 
> chrisp-acerAspire7103WSMi.asl  1418:             Method (WMCE, 3,
> NotSerialized)
> Warning  2019 -        Not all control paths return a value ^  (WMCE)
> 
> chrisp-acerAspire7103WSMi.asl  3708:                     Field (RAM,
> AnyAcc, Lock, Preserve)
> Error    1048 -     Host Operation Region requires ByteAcc access ^
> 
> chrisp-acerAspire7103WSMi.asl  3732:                     Field (RAM,
> AnyAcc, Lock, Preserve)
> Error    1048 -     Host Operation Region requires ByteAcc access ^
> 
> chrisp-acerAspire7103WSMi.asl  3759:                     Field (RAM,
> AnyAcc, Lock, Preserve)
> Error    1048 -     Host Operation Region requires ByteAcc access ^
> 
> chrisp-acerAspire7103WSMi.asl  3765:                     Field (RAM,
> AnyAcc, Lock, Preserve)
> Error    1048 -     Host Operation Region requires ByteAcc access ^
> 
> chrisp-acerAspire7103WSMi.asl  3771:                     Field (RAM,
> AnyAcc, Lock, Preserve)
> Error    1048 -     Host Operation Region requires ByteAcc access ^
> 
> ASL Input:  chrisp-acerAspire7103WSMi.asl - 6274 lines, 205163 bytes,
> 2820 keywords
> Compilation complete. 6 Errors, 7 Warnings, 0 Remarks, 622 Optimizations
> 
> 
> Does this look like I could do something to help myself out?
> 
> Cheers,
> --
> 
> ChrisP
> _______________________________________________
> freebsd-acpi@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi
> To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFGBwO7z/iRu7PdWERApBHAKDGj5L8VdoklMVUSdcWn/zEIy7JyQCdFlHs
SgaekiwG5W15A9IE/sZjKmM=
=9n8L
-----END PGP SIGNATURE-----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45181C0E.2040501>