Date: Sun, 05 Aug 2007 21:10:14 +0300 From: Mihai Tanasescu <mihai@duras.ro> To: Maksim Yevmenkin <maksim.yevmenkin@gmail.com> Cc: freebsd-bluetooth@freebsd.org Subject: Re: Bluesoleil bluetooth problems Message-ID: <46B61286.4080807@duras.ro> In-Reply-To: <bb4a86c70708031734x6bbfcb47yebe3004da1e7f35@mail.gmail.com> References: <46B07278.4000908@duras.ro> <bb4a86c70708011458t640554aclca2d03fd1ce8ca14@mail.gmail.com> <63857.86.105.56.142.1186040704.squirrel@www.duras.ro> <bb4a86c70708031734x6bbfcb47yebe3004da1e7f35@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Maksim Yevmenkin wrote: > On 8/2/07, mihai@duras.ro <mihai@duras.ro> wrote: > [...] > >> I disabled USB 2.0 from Bios. >> >> I've recompiled the kernel without device ehci. >> >> I commented out the reset in /etc/rc.d/bluetooth >> >> I've read about the NetBSD ehci problems and from what I saw their patch >> was made after one that was already included in FreeBSD. >> >> I've even upgraded the world to the latest RELENG_6_2. >> >> Now I'm getting: >> >> ubt0: vendor 0x1131 ISSCBTA, rev 1.10/3.73, addr 2 >> ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 >> ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; >> wMaxPacketSize=49; nframes=6, buffer size=294 >> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command >> OGF=0x4, OCF=0x9. Timeout >> ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) >> ubt_request_complete2: ubt0 - Control request failed. TIMEOUT (15) >> ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command >> OGF=0x4, OCF=0x5. Timeout >> >> The only notable difference I see between my current system and the VMWare >> one under which the dongle was working is that: >> - this system has: >> >> uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device >> 16.0 on pci0 >> usb0: <VIA 83C572 USB controller> on uhci0 >> >> - the vmware one had emulated an Intel USB controller >> >> but on the other hand I tried the dongle yesterday on a system with: >> <Intel 82801EB (ICH5) USB controller > and the same problems appeared >> >> Is there anything else I might be missing... ? >> >> >> > > could you please provide the output of > > 1) uname -a > > 2) usbdevs -dv > > 3) dmesg output - better if system was booted with -v > > it would be nice if you can provide the outputs for both cases, i.e. > when freebsd runs inside vmware and on real hardware. > > just from the look of it - its not a bluetooth problem. for whatever > reason, the system can not communicate with your bluetooth dongle. > > thanks, > max > FreeBSD machine: 1. uname -a: FreeBSD 6.2-RELEASE-p6 FreeBSD 6.2-RELEASE-p6 #5: Thu Aug 2 08:21:31 EEST 2007 /usr/obj/usr/src/sys/NEW i386 2. usbdevs -dv (freezes for about 1-2 seconds while displaying the first device): Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 uhub0 port 1 addr 2: full speed, self powered, config 1, ISSCBTA(0x1001), vendor 0x1131(0x1131), rev 3.73 ubt0 port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 uhub1 port 1 powered port 2 powered Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00 uhub2 port 1 powered port 2 powered 3. dmesg with verbose enabled: http://pastebin.com/m1d00e5c9 VMWare Windows machine + FreeBSD: 1. uname -a FreeBSD test 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 2. usbdevs -dv (still the same freeze here as the FreeBSD machine) [root@test ~]# usbdevs -dv Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port 1 addr 2: full speed, self powered, config 1, product 0x1001(0x1001), vendor 0x1131(0x1131), rev 3.73 ubt0 port 2 addr 3: full speed, self powered, config 1, VMware Virtual USB Hub(0x0002), vendor 0x0e0f(0x0e0f), rev 1.00 uhub1 port 1 powered port 2 powered port 3 powered port 4 powered port 5 powered port 6 powered port 7 powered 3. dmesg with verbose enabled: http://pastebin.com/m789b6c58
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46B61286.4080807>