Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Mar 2008 14:16:02 +0100
From:      "Ashant Chalasani" <sys@sellerbay.org>
To:        freebsd-questions@freebsd.org
Cc:        jmelo@freebsdbrasil.com.br, eksffa@freebsdbrasil.com.br
Subject:   Re: tinybsd doesn't have /etc/rc.d/ ?
Message-ID:  <6a5b467e0803280616h16868bdcmb5c12b6962e92261@mail.gmail.com>
In-Reply-To: <6a5b467e0803280434y571fa95exec22778fab0fbd82@mail.gmail.com>
References:  <6a5b467e0803270601h5590da83w76e159d9c445bbc4@mail.gmail.com> <6a5b467e0803280434y571fa95exec22778fab0fbd82@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Finally got the box to boot, with sshd.  I can connect on port 22, and
login prompt appears.  Very messy though, as this was possible only by
copying over /etc from host.

Can't figure out when I'm having to do all this, and why TinyBSD 0.9
doesn't work "out-of-the-make".  Or am I on a total tangent?  Jean?
Patrick?  Anybody there?


On Fri, Mar 28, 2008 at 12:34 PM, Ashant Chalasani <sys@sellerbay.org> wrote:
> Still no go on getting sshd to start.  A few things have gotten better though..
>
>  Both /etc/rc and /etc/defaults/rc.conf were missing.  Copying these
>  from host to tinybsd_ap helped.
>
>  init right now looks like:
>
>  --------------------------------------
>  Timecounters tick every 1.000 msec
>  Elan-mmcr driver: MMCR at 0xc5ad7000. PPS support.
>  Elan-mmcr Soekris net45xx comBIOS ver. 1.23a 20040211 Copyright (C) 2000-2003
>  ipfw2 initialized, divert enabled, rule-based forwarding disabled,
>  default to accept, logging disabled
>  ad0: 124MB <ZOOMCF 128MB CF040520> at ata0-master PIO4
>  Trying to mount root from ufs:/dev/ad0a
>  WARNING: /mnt was not properly dismounted
>  Invalid time in clock: check and reset the date!
>  Loading configuration files.
>  WARNING: / was not properly dismounted
>  mtree: line 6: unknown group wheel
>  cp: /var/log/lastlog: No such file or directory
>  chmod: /var/log/lastlog: No such file or directory
>  cp: /var/log/wtmp: No such file or directory
>  chmod: /var/log/wtmp: No such file or directory
>  eval: cannot create /var/run/dmesg.boot: No such file or directory
>  eval: cannot create /var/run/syslogd.sockets: No such file or directory
>  Starting syslogd.
>  syslogd: cannot open pid file: No such file or directory
>  Mar 28 08:52:31  syslogd: cannot create /var/run/log: No such file or directory
>  syslogd: child pid 83 exited with return code 1
>  Flushed all rules.
>  00100 allow ip from any to any via lo0
>  00200 deny ip from any to 127.0.0.0/8
>  00300 deny ip from 127.0.0.0/8 to any
>  Firewall rules loaded.
>  net.inet.ip.fw.enable: 1 -> 1
>  lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>         inet 127.0.0.1 netmask 0xff000000
>  Additional routing options:.
>  Additional IP options:.
>  Starting sshd.
>  Missing privilege separation directory: /var/empty
>  bridge0: Ethernet address: ca:03:78:21:3c:50
>  bridge0
>  ath0: promiscuous mode enabled
>  sis0: promiscuous mode enabled
>  Starting cron.
>  cron: can't open or create /var/run/cron.pid: No such file or directory
>
>  Fri M1sis0: Applying short cable fix (reg=f5)
>  sis0: link state changed to UP
>  -------------------------------------------------
>
>  /var/log/ and /var/run/ directory contents are:
>
>  [root@fbsd70 /var/log]# l
>  total 4
>  drwxr-xr-x  24 root  0  512 Mar 25 19:37 ..
>  -rw-r--r--   1 root  0    0 Mar 27 14:00 lastlog
>  -rw-r--r--   1 root  0    0 Mar 27 14:00 wtmp
>  drwxr-xr-x   2 root  0  512 Mar 27 14:01 .
>
>  [root@fbsd70 /var/run]# l
>  total 20
>  drwxr-xr-x   2 bind  53   512 Mar 25 17:02 named
>  drwxrwx---   2 root  69   512 Mar 25 17:02 ppp
>  drwxr-xr-x  24 root  0    512 Mar 25 19:37 ..
>  -rw-r--r--   1 root  0      0 Mar 28 09:36 utmp
>  -rw-r--r--   1 root  0      0 Mar 28 09:36 syslogd.sockets
>  -rw-r--r--   1 root  0   8879 Mar 28 09:36 dmesg.boot
>  -rw-r--r--   1 root  0      0 Mar 28 09:36 clean_var
>  drwxr-xr-x   4 root  0    512 Mar 28 09:36 .
>  -rw-------   1 root  0      4 Mar 28 09:36 cron.pid
>
>  Can anyone see why the /var/log and /var/run errors are occuring
>  inspite of files existing and writable?
>
>  Thanks
>  Ashant
>
>
>
>
>
>
>
>  On Thu, Mar 27, 2008 at 2:01 PM, Ashant Chalasani <sys@sellerbay.org> wrote:
>  > The whole of /etc/rc.d/ directory is missing on TinyBSD 0.9.  Is this
>  >  by design?  I'm hoping someone can throw light on it.
>  >
>  >  I copied the sshd script manually from my 7.0-REL host onto the flash
>  >  image, as also a simple initialization script that I wrote for setting
>  >  up the network.  But it looks like lot more startup scripts from
>  >  /etc/rc.d/ are required to initialize the system.  I can ping the
>  >  device on the network port, which means my network script ran.  But
>  >  sshd on port 22 isn't available, so I guess /etc/rc.d/sshd failed.
>  >
>  >  I prefer to copy only the necessary scripts into my target's
>  >  /etc/rc.d/ from the host, and not the whole directory.  There are 143
>  >  scripts in rc.d.  Is there a minimal subset of scripts to setup the
>  >  system, networking + basic services (dhclient, sshd etc)?
>  >
>  >  Thanks
>  >  Ashant
>  >
>  >  --
>  >  http://code.google.com/p/tinybsdap/
>  >
>
>
>
>  --
>  http://code.google.com/p/tinybsdap/
>



-- 
http://code.google.com/p/tinybsdap/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6a5b467e0803280616h16868bdcmb5c12b6962e92261>