Date: 21 Mar 1999 13:27:44 -0600 From: Hal Snyder <DrXyzzy@mediaone.net> To: scsi@freebsd.org Subject: 3.0 installs, 3.1 won't Message-ID: <87vhfuhccv.fsf@gamera.hws>
next in thread | raw e-mail | index | archive | help
I'm sending this in on behalf of a friend; it seems to be a SCSI problem. The motherboard and peripherals are about 1 year old. The Walnut Creek FreeBSD-3.0 CD installs/runs just fine. NT4Sp4 runs, well, as well as you'd expect it to. Copying files from the 3.1 CD seems to be almost twice as fast as the install from 3.0, but after about 30% of the way into /bin it stalls with repeated occurrences of "Unexpected busfree. LASTPHASE == 0xa0", never recovering. Hardware: 1. Tyan S1696-DLUA motherboard (dual P-II 300's, Adaptec 7895 dual UWSCSI, etc.) AMI BIOS Adaptec BIOS V1.32 Note: control-A related settings follow: AIC-7895 @ BUS: 00h Device: 0Fh Channel: A IRQ10 E800h AIC-7895 @ BUS: 00h Device: 0Fh Channel: B IRQ11 EC00h H/A SCSI ID=7 Termination = Auto Parity = Enabled Sync = Yes Tranfer rate 40MB/sec max. Initiate Wide = Yes Reset SCSI at IC Init = Enabled Extended BIOS Translation = Enabled Host Adapter BIOS = Enabled Removable Support = Boot Only BIOS Support for Bootable CD = Enabled BIOS Support for INT13 Extensions = Enabled 2. IBM DGVS09U UltraStar 9ZX 9.1GB 10,000 rpm UWSCSI drive On channel B as SCSI ID 0 (wide) 3. Plextor PX-32i Ultraplex USCSI interface CD drive On channel A as SCSI ID 2 (narrow) Ideas? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?87vhfuhccv.fsf>