Date: Mon, 20 Dec 2010 13:47:50 +0800 From: dave jones <s.dave.jones@gmail.com> To: Artyom Viklenko <artem@aws-net.org.ua> Cc: freebsd-pf@freebsd.org Subject: Re: Questions about multicast forwarding Message-ID: <AANLkTino2GdifngnKdmMOvrZsLvGBU0erG-0n%2BMXz3X%2B@mail.gmail.com> In-Reply-To: <4D0A01B8.8010009@aws-net.org.ua> References: <AANLkTi=06b3i_F9vWfvLO0z8R4_71Pi3BFr0SK4BEAH_@mail.gmail.com> <4D0A01B8.8010009@aws-net.org.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Artyom, I tried to use igmpproxy with no lock. "netstat -g" shows: IPv4 Virtual Interface Table Vif Thresh Local-Address Remote-Address Pkts-In Pkts-Out 0 1 172.16.112.2 0 0 1 1 172.16.113.8 0 0 2 1 172.16.112.2 0 0 Ipv4 Multicast Forwarding Table is empty In /usr/local/etc/igmpporxy: quickleave phyint re0 upstream ratelimit 0 threashold 1 phyint re1 downstream ratelimit 0 threshold 1 Did I set something wrong? Thanks! Cheers, Dave. On Thu, Dec 16, 2010 at 8:10 PM, Artyom Viklenko <artem@aws-net.org.ua> wro= te: > 16.12.2010 12:04, dave jones =D0=BF=D0=B8=D1=88=D0=B5=D1=82: >> >> Hi, >> >> I have the following networks: >> >> =C2=A0----------------------------------------------- >> =C2=A0 =C2=A0 =C2=A0| =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0| >> =C2=A0 =C2=A0 =C2=A0| =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0| >> =C2=A0 =C2=A0iptv device (172.16.113.2) FreeBSD (re0:172.16.113.8) >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 | =C2=A0 =C2=A0 (re1:172.16.112.2= ) >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 | >> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 = =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PCs >> >> The iptv device which sends to multicast 224.0.3.2, I want my PCs to >> receive multicast packets and let clients watch TV. >> Should I use net/mrouted or use pf can do that? >> Would anyone tell me how to do? Thanks. >> > > I'd suggest to use igmpproxy from ports. > > > -- > =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Sincerely yours, > =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 =C2=A0Artyom Viklenko. > ------------------------------------------------------- > artem@aws-net.org.ua | http://www.aws-net.org.ua/~artem > artem@viklenko.net =C2=A0 | JID: artem@jabber.aws-net.org.ua > FreeBSD: The Power to Serve =C2=A0 - =C2=A0http://www.freebsd.org >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTino2GdifngnKdmMOvrZsLvGBU0erG-0n%2BMXz3X%2B>