Date: Wed, 20 Apr 2016 18:34:40 +0300 From: Pavel Timofeev <timp87@gmail.com> To: Rainer Duffner <rainer@ultra-secure.de> Cc: freebsd-current@freebsd.org Subject: Re: OCZ ssdpx-1rvd0120 REVODRIVE support Message-ID: <CAAoTqfutC5QeK3CFsoOSMUxe6nrX1Xc_rWTqVCXBdQD-%2B=XE2g@mail.gmail.com> In-Reply-To: <FFE424A0-7859-4FD7-A39C-605346E7D711@ultra-secure.de> References: <CAAoTqftw--ks3BDZ0iCfQ25fb%2BYGrr9VknjVSbUQ1kFSLGdX-A@mail.gmail.com> <FFE424A0-7859-4FD7-A39C-605346E7D711@ultra-secure.de>
next in thread | previous in thread | raw e-mail | index | archive | help
17 =D0=B0=D0=BF=D1=80. 2016 =D0=B3. 13:44 =D0=BF=D0=BE=D0=BB=D1=8C=D0=B7=D0= =BE=D0=B2=D0=B0=D1=82=D0=B5=D0=BB=D1=8C "Rainer Duffner" <rainer@ultra-secu= re.de> =D0=BD=D0=B0=D0=BF=D0=B8=D1=81=D0=B0=D0=BB: > > > > Am 17.04.2016 um 11:05 schrieb Pavel Timofeev <timp87@gmail.com>: > > > > HI! I've recently got a SSD device. Yes, not a disk, but a device. > > It's called, i. e. one of the first REVODRIVEs. > > It's a PCI-express card with two embedded ssd disks about ~ 55GB size. > > And it's a raid card. Fake software raid. You can set it up as a > > RAID0, RAID1, etc and a CONCATENATION. No way to leave it unconfigured > > or set it as JBOD or something else. > > You just won't be able to boot from this device in that case. > > > > > > It says =E2=80=9ELinux support planned=E2=80=9C=E2=80=A6 > > on the product page. FreeBSD is not Linux =3D) Anyway I managed to install Ubuntu on it. Not on all of the configurations though. > > Tried loading the nvme(4) driver at the countdown? > > https://www.freebsd.org/cgi/man.cgi?query=3Dnvme&sektion=3D4 > > It's included into GENERIC. But no /dev/nv* devices are found. > I=E2=80=99d suspect the Intel SSD 750 series would be a better choice=E2= =80=A6 > Well, if I had a choise I wouldn't try to ask someone to help me ;) I'm not a developer, but it seemed to me not a really hard work to add full support of this device to FreeBSD, because it already work partyally and detects by graid. > > > Rainer Probably it's better to attach graid list/status output?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAoTqfutC5QeK3CFsoOSMUxe6nrX1Xc_rWTqVCXBdQD-%2B=XE2g>