Date: Mon, 15 Oct 2001 20:26:42 +0000 From: "Jeff C." <jefffbsd@hotmail.com> To: freebsd-stable@freebsd.org Subject: IDE problem? Message-ID: <F254FFK7dcLdZs3JcXu00006d09@hotmail.com>
next in thread | raw e-mail | index | archive | help
Board: Intel L440GX+ I have 2 disks in my machine. SCSI (18GB U2W 10Krpm) and a IDE 30GB maxtor. The maxtor is mounted on /www2. If I do anything on /www2 it almost stops responding for other requests. For example; tar -cvzf domain.tgz domain.com runs smooth. If I jump to another session and do a 'ls -la' it takes about 10 seconds to return. The SCSI drive does not have this issue. I think there must be a problem because locally I have freebsd running on IDE and it does not produce the same conditions. FreeBSD XXXXX.com 4.3-STABLE FreeBSD 4.3-STABLE #5: Wed Apr 25 20:35:16 PDT 2001 root@XXXXX.com:/usr/src/sys/compile/MYK i386 DMESG output: Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 518160384 (506016K bytes) Preloaded elf kernel "kernel" at 0xc0465000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1 pci2: <PCI bus> on pcib3 ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 11 at device 12.0 on pci0 aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 11 at device 12.1 on pci0 aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 10 at device 14.0 on pci0 fxp0: Ethernet address 00:XX:XX:XX:XX:XX isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq 10 at device 18.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0 pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0 pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci3: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IPv6 packet filtering initialized, default to accept, logging limited to 10 packets/entry DUMMYNET initialized (010124) IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 10 packets/entry by default BRIDGE 010131, have 10 interfaces -- index 1 type 6 phy 0 addrl 6 addr XX.XX.XX.XX.XX.XX IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled ad0: 29311MB <Maxtor 53073U6> [59554/16/63] at ata0-master UDMA33 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/da0s1a da0 at ahc1 bus 0 target 0 lun 0 da0: <IBM DMVS18V 0250> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F254FFK7dcLdZs3JcXu00006d09>