Date: Sat, 24 Jun 1995 21:50:29 -0400 (EDT) From: "Jonathan M. Bresler" <jmb@kryten.Atinc.COM> To: Steve Heemeyer <sheeme@corpcomm.net> Cc: questions@FreeBSD.org Subject: Re: FBSD 2.xR: AIC7xxx driver vs. st() driver vs. tape drives Message-ID: <Pine.3.89.9506242105.A15093-0100000@kryten.atinc.com> In-Reply-To: <9506240130.AA23614@netris1>
next in thread | previous in thread | raw e-mail | index | archive | help
note some heavy choppin of previous mail messages > >>Archive Viper QIC150 drive. > >> > >>DEBUG: Notify: Attempting to extract from SCSI tape drive... > >>DEBUG: Executing command 'cpio -iBduVm -H tar -I /dev/rst0' (Magic 0) > >>st0(ahc1:2:0): ILLEGAL REQUEST > >>st0: Cannot set selected mode > >>st0: bad request, must be between 0 and 0 > >>cpio: read error: Input/output error > >>DEBUG: Command 'cpio -iBduVm -H tar -I /dev/rst0' returns status of 1 > I am seeing a similar problem on an Ultrastor 34f controller and a Tandberg > 3800 tape drive. > > Jun 20 23:01:02 Fridmani /kernel: st0(uha0:6:0): ILLEGAL REQUEST \ > csi:10,8,0,0 asc:24,0 Invalid field in CDB field replaceable unit: 2 > Jun 20 23:01:02 Fridmani /kernel: st0: Cannot set selected mode with release 2.0R, i get similar problems using an archive viper 150, ncr810 and asus sp3g. st0(ncr1:5:0): illegal request st0: Cannot set selected modest0(ncr1:5:0): illegal request st0: Cannot set selected modest0: bad request, must be between 0 and 0 afterward a 'mt -f /dev/rst0 rewind' is enough to kick the drive/driver so i can use it. strange. Jonathan M. Bresler jmb@kryten.atinc.com | Analysis & Technology, Inc. | 2341 Jeff Davis Hwy play go. | Arlington, VA 22202 ride bike. hack FreeBSD.--ah the good life | 703-418-2800 x346
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.3.89.9506242105.A15093-0100000>