Date: Thu, 3 Feb 2000 11:48:30 +0000 (GMT) From: Stephen Roome <steveroo@mothra.bri.hp.com> To: multimedia@freebsd.org Subject: YMF719 soundcard Message-ID: <Pine.HPX.4.10.10002031137330.26867-100000@mothra.bri.hp.com>
next in thread | raw e-mail | index | archive | help
Okay, it's that getting sound card to work time of year again. I've got a Yamaha OPL-SAx card : pnpinfo says : CSN YMH0800 (0x0008a865), Serial Number 0xffffffff Logical device #0 IO: 0x0220 0x0530 0x0388 0x0370 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 3 IO range check 0x00 activate 0x01 Kernel config contains : controller pnp0 device pcm0 #device pcm0 at isa ? port ? tty irq 5 drq 1 flags 0x15 #neither of the above two lines work properly. /boot/kernel.conf contains : pnp 1 0 os enable port0 0x220 port1 0x530 port2 0x388 port3 0x370 pnp 1 0 irq0 5 drq0 1 drq1 3 dmesg says : CSN 1 Vendor ID: YMH0800 [0x0008a865] Serial 0xffffffff Comp ID: PNPb02f [0x2fb0d041] mss_attach <Yamaha YMF719 OPL-SA3>1 at 0x530 irq 5 dma 1:3 flags 0x13 setting up yamaha registers set yamaha master volume to max pcm1 (CS423x/Yamaha/AD1816 <Yamaha YMF719 OPL-SA3> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa ... How strange... mss_intr with no reason! (I get a lot of these sometimes) The pcm driver just doesn't work properly [1], I've been through this before, and I've tried to get the chipset specs from Yamaha (no luck). In the past I've tried to get this card to work properly, and yesterday with oss it worked properly for the first time (after oss caused me about 10 different panics/double panics etc.) however I'd like to try to get this to work with the pcm driver or even the voxware [2] driver. I assume that to do this I will need either someone who has a working card to tell me how they did it, or alternatively if someone has the relevant chipset information to send it to me. Alternatively, I can buy a new card (I expect that once this card has failed any attempts to make it work I'll put it in the bin - or I could send it to someone who really wants to make it work =) ) Any help would be very much appreciated, Steve Roome [1] I can get the card to play standard audio, but all the mixer channels are wrong, i.e. synth is the cd player, mic/cd/line are all the wrong channels and they don't always work, also the bass/treble channels don't come up in the mixer. [2] I'd like working midi, and I'd like to be able to use the synthesizer on the card, as I beleive it's probably not all that bad, so maybe voxware is what I want after all. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.HPX.4.10.10002031137330.26867-100000>