Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 24 Aug 2002 00:00:24 +0200 (=?X-UNKNOWN?Q?=8Crodkowoeuropejski_czas_letni?=)
From:      Franek Kowalski <franky@jasna.tarnow.pl>
To:        current@freebsd.org
Subject:   Re: QUOTA
Message-ID:  <Pine.WNT.4.44.0208232354330.1232-100000@main>
In-Reply-To: <20020824210625.GB2209@over-yonder.net>

next in thread | previous in thread | raw e-mail | index | archive | help

> It is generally required that you send at least `uname -a` output for
> list members to be any help to you. In your case, the kernel boot
> messages would probably be useful--`dmesg`.
matrix# dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Aug 23 04:29:54 GMT 2002
    root@matrix.jasna.tarnow.pl:/usr/src/sys/i386/compile/myker
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03b3000.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1218357651 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1218.36-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (524224K bytes)
avail memory = 514756608 (502692K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 12 entries at 0xc00fd950
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem
0xd5000000-0xd50fffff,0xd5140000-0xd5140fff irq 11 at device 0.0 on pci2
fxp0: Ethernet address 00:03:47:ac:75:a5
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.15> mem
0xd5120000-0xd512ffff,0xd5100000-0xd511ffff irq 12 at device 2.0 on pci2
em0:  Speed:1000 Mbps  Duplex:Full
pci2: <display, VGA> at device 4.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> mem 0xd5141000-0xd5141fff irq 5 at
device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to accept, logging limited to 100 packets/entry by default
DUMMYNET initialized (011031)
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 5 function 0 config 1 on
pccard0
wi0: 802.11 address: 00:02:2d:30:fc:66
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 7.28.01
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100
ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA100
Mounting root from ufs:/dev/ad0s1a
matrix# uname -a
FreeBSD matrix.jasna.tarnow.pl 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Fri Aug
23 04:29:54 GMT 2002
root@matrix.jasna.tarnow.pl:/usr/src/sys/i386/compile/myker  i386
matrix# mount
/dev/ad0s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/ad0s1e on /tmp (ufs, local, soft-updates)
/dev/ad0s1g on /usr (ufs, local, soft-updates)
/dev/ad0s1f on /var (ufs, local, soft-updates)
matrix# cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump
Pass#
/dev/ad0s1b             none            swap    sw              0       0
/dev/ad0s1a             /               ufs     rw              1       1
/dev/ad0s1e             /tmp            ufs     rw,userquota    2       2
/dev/ad0s1g             /usr            ufs     rw              2       2
/dev/ad0s1f             /var            ufs     rw              2       2
/dev/acd0c              /cdrom          cd9660  ro,noauto       0       0
matrix# quotacheck -v /tmp
*** Checking user quotas for /dev/ad0s1e (/tmp)
quotacheck: bad inode number 1 to nextinode
matrix#



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.WNT.4.44.0208232354330.1232-100000>