Date: Sun, 28 Apr 1996 17:12:22 +0200 (MST) From: Matthias.Apitz@SoftcoN.de (Matthias Apitz) To: robert@elastica.com (Robert Nicholson) Cc: flexfax@sgi.com, questions@freebsd.org Subject: Re: Anybody using a Zyxel Elite 2864? (Can not deduce modem type) Message-ID: <9604281712.AA11247@kant.SoftcoN.de> In-Reply-To: <199604280339.XAA00449@justine.elastica.com> from "Robert Nicholson" at Apr 27, 96 11:39:36 pm
next in thread | previous in thread | raw e-mail | index | archive | help
Robert Nicholson wrote: My elite is using the latest ROM revision... (dated March 96 I think). You can't use the firmware version 1.12 with HylaFAX. I've posted the following to the ZyXEL beta-testers list and to ZyXEL: --start of insert-- Subject: firmware 2.01 DSS1 To: 2864i-testers@zyxel.com ... ati1 Elite 2864I DSS1: V 2.01 Internal fax/modem: V 1.12 .... The problems are: 1.) As described in the rel.notes the response for ATH is twice OK which makes 2.01 unuseable for HylaFAX w/o changing the source code of HylaFAX to skip this problem: at&f OK AT&F&O0&B1&S0S18=4S38.3=1S2=042E0V1Q0S0=0H0 OK OK .... --end of insert-- (note: do not use "&O0" in the string above for your modem; "&O0 is only for the ISDN 2864I; the rest of the AT-cmd should show the problem on your 2864 too;) My log is showing the following when I attempt to send a fax justine% faxstat Server on localhost:FIFO for all modems: Running. Job Modem Destination Time-To-Send Sender Status 1 any +17039180498 23:22 1996/04/27 Robert Nichols Queued and waiting justine% Apr 27 23:22:29 justine FaxQueuer[191]: SUBMIT JOB "sendq/q1" Apr 27 23:22:37 justine FaxSend[353]: /dev/cuaa1: Can not deduce modem type. My modem config file is as follows # $Header: /usr/people/sam/fax/./config/RCS/zyxel-1496e-2.0,v 1.14 1995/04/08 21:25:03 sam Rel $ # # HylaFAX Facsimile Software # # Copyright (c) 1990-1995 Sam Leffler # Copyright (c) 1991-1995 Silicon Graphics, Inc. # HylaFAX is a trademark of Silicon Graphics, Inc. <...deleted...> # &N0 Auto-negotiate highest possible DCE-DCE link rate # &S0 DSR always on # *F0 Deny remote configuration # S18=2 Receive at 38400 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ <...deleted...> This will not work for your 2864; the values in S18 are changed from the 1496 to the 2864; see your 2864 manual for the new values; a working config file is also at http://www.vix.com/hylafax/FAQ/Q65.html Anybody know why it's complaining? Also, when I faxrm the job I get back a message but it says that "No transcript is available" How can I log the session to the modem so I can diagnose the problem? see the HylaFAX man pages of log(4) and config(4) and the man pages of your syslogd(1M) for the information how to trace the modem communication. Hope it helps; matthias -- firm: matthias.apitz@softcon.de [voc:+49 89 61308 51,fax: +49 89 61308 83] priv: guru@thias.muc.de WWW: http://www.softcon.de/~guru/ OR http://www.guug.de/GUUG/firmen/apitz/ Q: Can anybody think of any concept that was invented by Microsoft? A: A variety of affordable viruses. (from alt.unix.wizards)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9604281712.AA11247>