Date: Sun, 23 Nov 2008 08:54:53 +0000 From: Jay <jay.krell@cornell.edu> To: <freebsd-ia64@freebsd.org> Subject: freebsd/ia64 reboots early in boot Message-ID: <COL101-W55343839C935F1F78DDBF9E6090@phx.gbl>
next in thread | raw e-mail | index | archive | help
FreeBSD 7.0/ia64 is able to load the kernel and get pretty far into it=2C
but reboots the machine before getting to any interactive stuff.
This is the "boot only" CD=2C which I thought I might be able to use to ins=
tall.
I still don't know what it is for.
7.1beta2=2C same thing=2C except no buzzing sound (possibly
because I didn't=2C like=2C reset the previous error?)
This is an HP Integrity rx2600.
One internal 73gig scsi hard drive.
One external USB optical drive.
Serial console.
Linux works on it. (anyone know how to affordably get HP-UX and/or OpenVMS?=
)
I updated some (all?) firmware.
Could be it doesn't like booting off a USB CD??
The machine doesn't have an internal optical drive.
Linux installed ok this way.
I'll probably have an internal optical drive soon.
Machine bought used/cheap on eBay.
=20
=20
serial console output:
7.0:
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF zx6000/rx2600/zx2000 1.22 [Thu Mar 11 14:22:35 2004] - HP
Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7
Loading 'FPSWA'...
Loading 'lsi1030'...
Loading 'gigundi'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
Scsi(Pun0=2CLun0) HP 73.4GST373405LC HP04 (160 MBytes/sec)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411]
Loading device drivers
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4411]
Please select a boot option
Debian GNU/Linux
Linux
Linux backup
EFI Shell [Built-in]
Linux Reinstall
Boot Option Maintenance Menu
System Configuration Menu
Use ^ and v to change option(s). Use Enter to select an option
EFI Boot Maintenance Manager ver 1.10 [14.61]
Main Menu. Select an Operation
Boot from a File
Add a Boot Option
Delete Boot Option(s)
Change Boot Order
Manage BootNext setting
Set Auto Boot TimeOut
Select Active Console Output Devices
Select Active Console Input Devices
Select Active Standard Error Devices
Cold Reset
Exit
Timeout-->[10] sec SystemGuid-->[B02EAEAD-3D76-11D7-9E4B-30864E0D85C8]
SerialNumber-->[US25362801 ]
EFI Boot Maintenance Manager ver 1.10 [14.61]
Boot From a File. Select a Volume
NO VOLUME LABEL [Acpi(HWP0002=2C100)/Pci(1|0)/Scsi(Pun0=2CLun0)/HD(P
Removable Media Boot [Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0)]
Load File [EFI Shell [Built-in]]
Load File [Acpi(HWP0002=2C0)/Pci(3|0)/Mac(00306E3849D0)]
Load File [Acpi(HWP0002=2C100)/Pci(2|0)/Mac(00306E38C9F1)]
Exit
Device Path Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0)
Consoles: EFI console
Image base: 0x00000040fef72000
FreeBSD/ia64 EFI boot=2C Revision 1.2
(root@pluto1.freebsd.org=2C Sun Feb 24 21:12:16 UTC 2008)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=3D0xb46ac0+0x3f308 syms=3D[0x8+0x7a820+0x8+0x6b072=
]
/
Hit [Enter] to boot immediately=2C or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xe000000004070000...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979=2C 1980=2C 1983=2C 1986=2C 1988=2C 1989=2C 1991=2C 1992=
=2C 1993=2C 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Mon Feb 25 07:27:59 UTC 2008
root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
CPU: Madison (1500.00-Mhz Itanium 2)
Origin =3D "GenuineIntel" Revision =3D 5
Features =3D 0x1
real memory =3D 10717020160 (10220 MB)
avail memory =3D 9992945664 (9530 MB)
FPSWA Revision =3D 0x10012=2C Entry =3D 0xe0000040ffe62050
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: SAPIC Id=3D0=2C SAPIC Eid=3D0 (BSP)
cpu1: SAPIC Id=3D1=2C SAPIC Eid=3D0
acpi0: on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: iomem 0xff5c1004-0xff5c1007 on acpi0
cpu0: on acpi0
cpu1: on acpi0
acpi_tz0: on acpi0
pcib0: on acpi0
pci0: on pcib0
ohci0: mem 0x80023000-0x80023fff irq 16 at device
1.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0: on ohci0
usb0: USB revision 1.0
uhub0: on usb0
uhub0: 3 ports with 3 removable=2C self powered
ohci1: mem 0x80022000-0x80022fff irq 17 at device
1.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0
usb1: on ohci1
usb1: USB revision 1.0
uhub1: on usb1
uhub1: 2 ports with 2 removable=2C self powered
ehci0: mem 0x80021000-0x800210ff irq 18 at d
evice 1.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 0.95
usb2: companion controllers=2C 3 ports each: usb0 usb1
usb2: on ehci0
usb2: USB revision 2.0
uhub2: on usb2
uhub2: 5 ports with 5 removable=2C self powered
umass0: on uhub2
umass0: Get Max Lun not supported (STALLED)
atapci0: port 0xd58-0xd5f=2C0xd64-0xd67=2C0xd50-0xd
57=2C0xd60-0xd63=2C0xd40-0xd4f irq 21 at device 2.0 on pci0
atapci0: [ITHREAD]
atapci0: HW has secondary channel disabled
ata2: on atapci0
ata2: [ITHREAD]
fxp0: port 0xd00-0xd3f mem 0x80020000-0x80020fff=2C
0x80000000-0x8001ffff irq 20 at device 3.0 on pci0
miibus0: on fxp0
inphy0: PHY 1 on miibus0
inphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C auto
fxp0: Ethernet address: 00:30:6e:38:49:d0
fxp0: [ITHREAD]
pcib1: on acpi0
pci32: on pcib1
mpt0: port 0x2100-0x21ff mem 0x90840000-0x9084fff
f=2C0x90830000-0x9083ffff irq 27 at device 1.0 on pci32
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.2.12.0
mpt1: port 0x2000-0x20ff mem 0x90820000-0x9082fff
f=2C0x90810000-0x9081ffff irq 28 at device 1.1 on pci32
mpt1: [ITHREAD]
mpt1: MPI Version=3D1.2.12.0
bge0: mem 0x90
800000-0x9080ffff irq 29 at device 2.0 on pci32
miibus1: on bge0
brgphy0: PHY 1 on miibus1
brgphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-F
DX=2C auto
bge0: Ethernet address: 00:30:6e:38:c9:f1
bge0: [ITHREAD]
pcib2: on acpi0
pci64: on pcib2
pcib3: on acpi0
pci96: on pcib3
pcib4: on acpi0
pci128: on pcib4
pci128: at device 1.0 (no driver attached)
pcib5: on acpi0
pci192: on pcib5
uart0: iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0
uart0: [FILTER]
uart0: console (9600=2Cn=2C8=2C1)
uart1: iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0
uart1: [FILTER]
uart1: debug port (9600=2Cn=2C8=2C1)
ukbd0: on uhub1
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
md0: Preloaded image 8388608 bytes at 0xe000000004c6b670
da0 at mpt0 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-2 device
da0: 160.000MB/s transfers (80.000MHz=2C offset 63=2C 16bit)
da0: Command Queueing Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: cd present [31401 x 2048 byte records]
=20
pause..then some buzzing sounds..then it reboots
=20
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 02.31
* ROM Date : 03/11/2004
* BMC Version : 01.53
***********************************************************
=20
7.1=2C skipping the EFI part:
Device Path Acpi(HWP0002=2C0)/Pci(1|0)/Usb(1=2C 0)
Consoles: EFI console
Image base: 0x00000040fef72000
FreeBSD/ia64 EFI boot=2C Revision 1.2
(root@pluto1.freebsd.org=2C Mon Oct 13 06:37:13 UTC 2008)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=3D0xbc7530+0x41d58 syms=3D[0x8+0x80bc8+0x8+0x707ac=
]
/
Hit [Enter] to boot immediately=2C or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Entering /boot/kernel/kernel at 0xe000000004078000...
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979=2C 1980=2C 1983=2C 1986=2C 1988=2C 1989=2C 1991=2C 1992=
=2C 1993=2C 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-BETA2 #0: Mon Oct 13 16:01:01 UTC 2008
root@pluto1.freebsd.org:/usr/obj/usr/src/sys/GENERIC
CPU: Madison (1500.00-Mhz Itanium 2)
Origin =3D "GenuineIntel" Revision =3D 5
Features =3D 0x1
real memory =3D 10717003776 (10220 MB)
avail memory =3D 9992929280 (9530 MB)
FPSWA Revision =3D 0x10012=2C Entry =3D 0xe0000040ffe62050
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: SAPIC Id=3D0=2C SAPIC Eid=3D0 (BSP)
cpu1: SAPIC Id=3D1=2C SAPIC Eid=3D0
acpi0: on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: iomem 0xff5c1004-0xff5c1007 on acpi0
acpi_tz0: on acpi0
pcib0: on acpi0
pci0: on pcib0
ohci0: mem 0x80023000-0x80023fff irq 16 at device
1.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0: on ohci0
usb0: USB revision 1.0
uhub0: on usb0
uhub0: 3 ports with 3 removable=2C self powered
ohci1: mem 0x80022000-0x80022fff irq 17 at device
1.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0
usb1: on ohci1
usb1: USB revision 1.0
uhub1: on usb1
uhub1: 2 ports with 2 removable=2C self powered
ehci0: mem 0x80021000-0x800210ff irq 18 at d
evice 1.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 0.95
usb2: companion controllers=2C 3 ports each: usb0 usb1
usb2: on ehci0
usb2: USB revision 2.0
uhub2: on usb2
uhub2: 5 ports with 5 removable=2C self powered
umass0: on uhub2
umass0: Get Max Lun not supported (STALLED)
atapci0: port 0xd58-0xd5f=2C0xd64-0xd67=2C0xd50-0xd
57=2C0xd60-0xd63=2C0xd40-0xd4f irq 21 at device 2.0 on pci0
atapci0: [ITHREAD]
atapci0: HW has secondary channel disabled
ata2: on atapci0
ata2: [ITHREAD]
fxp0: port 0xd00-0xd3f mem 0x80020000-0x80020fff=2C
0x80000000-0x8001ffff irq 20 at device 3.0 on pci0
miibus0: on fxp0
inphy0: PHY 1 on miibus0
inphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C auto
fxp0: Ethernet address: 00:30:6e:38:49:d0
fxp0: [ITHREAD]
pcib1: on acpi0
pci32: on pcib1
mpt0: port 0x2100-0x21ff mem 0x90840000-0x9084fff
f=2C0x90830000-0x9083ffff irq 27 at device 1.0 on pci32
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.2.12.0
mpt1: port 0x2000-0x20ff mem 0x90820000-0x9082fff
f=2C0x90810000-0x9081ffff irq 28 at device 1.1 on pci32
mpt1: [ITHREAD]
mpt1: MPI Version=3D1.2.12.0
bge0: mem 0x90
800000-0x9080ffff irq 29 at device 2.0 on pci32
miibus1: on bge0
brgphy0: PHY 1 on miibus1
brgphy0: 10baseT=2C 10baseT-FDX=2C 100baseTX=2C 100baseTX-FDX=2C 1000baseT=
=2C 1000baseT-F
DX=2C auto
bge0: Ethernet address: 00:30:6e:38:c9:f1
bge0: [ITHREAD]
pcib2: on acpi0
pci64: on pcib2
pcib3: on acpi0
pci96: on pcib3
pcib4: on acpi0
pci128: on pcib4
pci128: at device 1.0 (no driver attached)
pcib5: on acpi0
pci192: on pcib5
uart0: iomem 0xff5e0000-0xff5e0007 irq 34 on acpi0
uart0: [FILTER]
uart0: console (9600=2Cn=2C8=2C1)
uart1: iomem 0xff5e2000-0xff5e2007 irq 35 on acpi0
uart1: [FILTER]
uart1: debug port (9600=2Cn=2C8=2C1)
cpu0: on acpi0
cpu1: on acpi0
ukbd0: on uhub1
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
md0: Preloaded image 8388608 bytes at 0xe000000004cfa610
da0 at mpt0 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-2 device
da0: 160.000MB/s transfers (80.000MHz=2C offset 63=2C 16bit)
da0: Command Queueing Enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: cd present [34892 x 2048 byte records]
=20
pause again=2C and reboot..
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 02.31
* ROM Date : 03/11/2004
* BMC Version : 01.53
***********************************************************
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x0000A4 0x0000000000000000 start memory discovery
=20
- Jay=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?COL101-W55343839C935F1F78DDBF9E6090>